Quick Start Guide

8. That's it! Set up is complete. The next time you want to listen to HD
wireless audio with your favorite earbuds, headphones or powered
speakers, you can just turn on the TV and SendXFob and plug it in.
Enjoy!
6. Turn the SendXFob volume down to the lowest level and plug your
earbuds, headphones or powered speakers into the 3.5mm port.
Gradually increase the SendXFob volume to a comfortable listening level.
5. Turn on the SendXfobs once they are charged. Ensure that the LED
light for the "Mode" on the SendXFob is set to receive mode ("Recv").
You can depress the Mode button to set the SendXFob to receive mode
if it is in Send mode. Press the Bond button twice to search for the audio
signal being transmitted from the TV.
4. Turn on the TV and select something to watch with continuous audio.
3. Adjust TV audio settings to enable audio out for the port you have
plugged the transmitter into. You may have the option to mute the sound
coming from the internal TV speakers or keep both on. We recommend
keeping both on if you have the option so you don't have to switch back
and forth. For SendXDigital, you will need to select the PCM 2-channel
option only if it is shown as an option.
2. Connect transmitter to TV and plug USB into power source on TV
(Alternative: Plug USB into separate power source)
1. Plug charging base into wall socket and place SendXFobs on base
to charge. It takes up to two hours to fully charge. The Battery indicator
light on the SendXFob will be solid red when charging and then will
turn off once it is fully charged.
Digital Transmitter QuickStart Guide
DIGITAL
TOSLINK TOSLINK
7. Once you've confirmed you are listening to audio, you can press
and hold the Bond button for 2 seconds so that it remembers the
transmitter channel.
The LED light above the Bond button will turn green.
BONUS USE CASE: Each SendXFob has the ability to transmit audio as well as receive.
You just need to change the MODE to Send. You have the option of plugging a SendXFob
set to Send mode into any audio source with a 3.5mm port and transmitting HD wireless
audio to another SendXFob set to Recv mode. Go to www.SendXAudio.com to explore
the many options you have to build a SendXAudio ecosystem in your home and send
audio from any source to any headphones or speakers!
[e-mail]
www.SendXAudio.com
The SKAA
TM
wordmark and trademark are owned by Eleven Engineering
Inc.
www.SKAA.com
BOND
BUTTON