User Manual

ManualsBrandsSendFar Technology ManualsElectronicsWireless Access Bridge

SF-300CB

8/14

SendFar is the registered trademark of SendFar Technology Co., Ltd..

5. Product Specifications

5.1 General

Radio Data Rate 11, 5.5, 2 and 1 Mbps, Auto Fall-Back

Client Interface 10/100Base-T Ethernet

Range (open environment) 300m @ 11.0Mbps

400m @ 05.5Mbps

500m @ 02.0Mbps

800m @ 01.0Mbps

EMC Certifications FCC Part 15

ETSI 300/328

Compatibility Fully interoperable with IEEE802.11b

compliant products

Power Supply

AC/DC Adapter：24V / 0.83A

(via AC power outlet 100~240V, 50~60Hz)

PoE：16 ~ 32V

5.2 Network Information

Network Architecture Infrastructure (via SendFar AP/RB-8110

AP or Bridge)

Drivers Windows 95/98/ME/2000/NT 4.0/XP

Access Protocol CSMA/CA

Roaming IEEE802.11b compliant

Security 64-/128-bit data encryption

5.3 Radio Specifications

Frequency Band 2.4 – 2.4835 GHz

Radio Type Direct Sequence Spread Spectrum

(DSSS)

Modulation CCK (11, 5.5Mbps)

DQPSK (2Mbps)

DBPSK (1Mbps)

Operation Channels

North America：11

Japan：14

Europe：13

Spain：2

France：4

Available Transmit Power Settings <30dBm (<1W) For FCC

<20dBm (<100mW) For CE

Antenna One detachable 5dBi omni-direction

rubber antenna with RP-SMA (FCC) or

SMA (ETSI) connector & 12dBi patch

Antenna ( Option)

Sensitivity @ FER=0.08 11.0 Mbps < -85dBm

5.5 Mbps < -88dBm

02.0 Mbps < -91dBm

01.0 Mbps < -93dBm

Summary of content (7 pages)

PAGE 1
SF-300CB 5. Product Specifications 5.1 General Radio Data Rate Client Interface Range (open environment) EMC Certifications Compatibility Power Supply 11, 5.5, 2 and 1 Mbps, Auto Fall-Back 10/100Base-T Ethernet 300m @ 11.0Mbps 400m @ 05.5Mbps 500m @ 02.0Mbps 800m @ 01.0Mbps FCC Part 15 ETSI 300/328 Fully interoperable with IEEE802.11b compliant products AC/DC Adapter：24V / 0.83A (via AC power outlet 100~240V, 50~60Hz) PoE：16 ~ 32V 5.
PAGE 2
SF-300CB 5.4 Environmental Temperature Range Humidity (non-condensing) -20 to 55℃ (operating) -20 to 75℃ (storage) 5% to 95% typical 5.5 Physical Specifications Dimensions Weight 138.7mm x 600g 104.0mm x Copyright © 2002 SendFar Technology. All rights reserved. SendFar is the registered trademark of SendFar Technology Co., Ltd.. 38.
PAGE 3
SF-300CB 6. Software Specifications Protocol Security Management Misc supports Firmware upgrade TCP/IP NAT/NAPT DHCP Client Virtual Server Mapping (NAT inbound server) 802.
PAGE 5
SF-300CB 8. Regulatory Compliance Information FCC Part 15 Notice (Applicable to use within the USA) CAUTION: FCC Radio-Frequency Exposure Notice This device generates and radiates radio-frequency energy. In order to comply with FCC radio-frequency radiation exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of the device and all persons. This product does not contain any user serviceable components.
PAGE 6
SF-300CB Appendix A The purpose of this Appendix is to describe a SNMP proprietary MIB for the SendFar SF300 Wireless Access Bridge. This MIB Module defines SendFar implementation-specific metrics useful in managing IEEE 802.11 on SendFar boxes. This is to be used as a supplement to the standard 802.11 MIB proposed by IEEE. Information contained in the MIB elements defined in this module is affected by the Web configuration, except where it is explicitly noted to the contrary.
PAGE 7
SF-300CB SysReboot SysConfigApply ResetToFactoryDefaults ClearCounters BridgeTabeMACAddress Integer Integer Integer Integer Bridge Table Octet String read-write read-write read-write read-write read-only Copyright © 2002 SendFar Technology. All rights reserved. SendFar is the registered trademark of SendFar Technology Co., Ltd..