User's Manual

ManualsBrandsSenao Networks ManualsElectronicsAP-Indoor

IAP8350AG Page 1

IAP8350AG/IAP8351AG

Installation Guide

Indoor Enterprise AP

V. 0.1

▌PRODUCT DESCRIPTION

IAP8350AG is Senao new generation of Enterprise AP with 4x4 MU-MIMO technology

implement. It is using Qualcomm total solution to provide the maximum throughput

on the WIFI.

IAP8350AG is internal antenna model.

IAP8351AG is external antenna model.

Any installation to IAP8350AG applies to both models.

▌PACKAGE CONTENT

 IAP8350AG or IAP8351AG Access Point

 IAP8350AG/IAP8351AG Quick Start Guidet

 Mounting Bracket

 Mounting screw kits (includes washers, wall anchors and bolts)

Summary of content (5 pages)

PAGE 1
IAP8350AG/IAP8351AG Installation Guide Indoor Enterprise AP V. 0.1 ▌PRODUCT DESCRIPTION IAP8350AG is Senao new generation of Enterprise AP with 4x4 MU-MIMO technology implement. It is using Qualcomm total solution to provide the maximum throughput on the WIFI. IAP8350AG is internal antenna model. IAP8351AG is external antenna model. Any installation to IAP8350AG applies to both models.
PAGE 2
 5G Diople antennas  2.4G Diople antenna ▌CONNECT TO THE IAP8350AG/IAP8351AG ACCESS POINT 1. Attach and gently tighten the provided antennas to the appropriate port on the IAP8351AG 2. Power is provided through two Ethernet ports (LAN port). This is the preferred method of powering the AP on ceiling and wall installations 3. The IAP8350AG can also be powered by an external DC power supply plugged into an AC source.
PAGE 3
▌MOUNTING OF THE IAP8350AG/IAP8351AG ACCESS POINT TOOL-LESS CEILING MOUNT IAP8350AG Page 3
PAGE 4
FLAT WALL OR SOLID CEILING MOUNTING Mounting the AP with 4 drill holes into flat wall or solid ceiling mounting.
PAGE 5
FCC Statement: Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.