Bluetooth® Stereo Headset & Intercom with Built-in FM Tuner for Half Helmets www.senabluetooth.
SPH10H-FM
SPH10H-FM Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SPH10H-FM™, SMH10™, SMH5™, SMH5-FM™, SPH10™, SPH10S™, SPH10H™, SR10™, SM10™, SMH10R™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license.
SPH10H-FM CONTENTS 1. INTRODUCTION 2. PACKAGE CONTENTS 3. INSTALLING THE SPH10H-FM ON YOUR HELMET 4. POWERING ON/OFF AND CHARGING 4.1 Powering On 4.2 Powering Off 4.3 Charging 4.4 Low Battery Warning 4.5 Checking the Battery Level 5. VOLUME ADJUSTMENT 6. PAIRING THE SPH10H-FM WITH BLUETOOTH DEVICES 6.1 Mobile Phone Pairing 6.2 Bluetooth Stereo Device Pairing 6.3 Bluetooth GPS Navigation Pairing 6.4 Pairing with the Sena SR10, Bluetooth Two-way Radio Adapter 7.
SPH10H-FM Thank you for choosing the Sena SPH10H-FM, Bluetooth Stereo Headset & Intercom with Built-in FM Tuner for Half Helmets. With the SPH10H-FM, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders. The SPH10H-FM is compliant with the Bluetooth 3.
SPH10H-FM 2.
SPH10H-FM • Cigarette Charger • Microphone Sponges 3. INSTALLING THE SPH10H-FM ON YOUR HELMET English • USB Power and Data Cable Before installing the SPH10H-FM, remove the main unit from the earpad. 1. Pull the connector cover upward to unlock the connector and pull out the speaker cable. • Tab Insertion Tool 2. Slide upward the main unit to remove from the earpad.
SPH10H-FM 3. Insert the two plastic tabs of the SPH10H-FM on the headset earpads into the left and right side of your helmet. You may use the tab insertion tool located in the package to help insert the plastic tabs into your helmet. Place the tab insertion tool against the tab side with velcro. Insert the tab and tab insertion tool at the same time into the helmet. When the tab is in the proper position, slide the tab insertion tool out. The velcro will now hold the tab securely in place. 5.
SPH10H-FM 4. POWERING ON/OFF AND CHARGING English 8. Tuck in the cable that connects left and right earpads, between the helmet shell and protective padding or inside the helmet. To power on and off the headset, you don’t need to press and hold any button for several seconds. Just short press the Jog Dial and the Phone Button simultaneously, and you will get quick on-and-off convenience. 4.1 Powering On Press the Jog Dial and the Phone Button at the same time for about 1 second to power on.
SPH10H-FM • The USB power and data cable is also used for firmware upgrade of the SPH10H-FM. • You can use any of the standard micro-USB cables which is mostly adopted by smartphones and general Bluetooth headsets manufacturers. • The charging LED beside the charging port turns on red while charging, and turns to blue when the headset is fully charged. It takes about 2.5 hours to be fully charged. • You can use the SPH10H-FM while charging.
SPH10H-FM You can easily adjust the volume by rotating the Jog Dial. You will hear a beep when the volume reaches maximum or minimum level. The volume is set and maintained independently at different levels for each audio source even when you turn off and on the headset. For example, once you set the volume for mobile phone handsfree, it will not change even if you adjust the volume when you hear Bluetooth MP3 music. So you can always maintain the preferred optimum volume level for each audio source. 6.
SPH10H-FM 2. Search for Bluetooth devices on your mobile phone. Select the Sena SPH10H-FM in the list of the devices detected on the mobile phone. 3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. 4. The mobile phone confirms that pairing has completed and the SPH10H-FM is ready to use. You will hear a voice prompt from the SPH10H-FM saying “Your headset is paired”. 5. If the pairing process is not completed within three minutes, the SPH10H-FM will return to stand-by mode. 6.1.
SPH10H-FM 6.3 Bluetooth GPS Navigation Pairing 6.3.1 Multipoint GPS Pairing If you use GPS only for turn-by-turn voice instructions, not for Bluetooth stereo music streaming, multipoint pairing is recommended for the GPS connection. Multipoint Bluetooth pairing allows the SPH10H-FM to connect two HFP devices at the same time: mobile phone and GPS navigation. Follow the steps below to pair the GPS using the multipoint pairing. 1.
SPH10H-FM The pairing diagram for multipoint GPS pairing is shown in the figure below. systems support mobile phone bridging over Bluetooth, you can pair the mobile phone to the GPS to use your mobile phone. Please refer to the user’s guide of your GPS for details. HFP Smart Phone GPS HFP + Mobile Phone Pairing A2DP Mobile Phone HFP Mobile Phone + Pairing (A2DP) HFP SPH10H-FM Multipoint Pairing GPS SPH10H-FM Multipoint GPS Pairing 6.3.
SPH10H-FM The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses HFP as do most motorcycle specific GPS navigation systems. If you pair the SPH10H-FM with a SR10 by multipoint pairing, the SPH10H-FM is able to have two HFP devices at the same time: mobile phone and Sena SR10. 1. Turn on the headset and press the Jog Dial for 5 seconds until the red LED is rapidly flashing and you hear multiple beeps. 2.
SPH10H-FM 7. PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE Smart Phone HFP + Mobile Phone Pairing A2DP Wired Connection HFP SPH10H-FM If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the SPH10H-FM for A2DP stereo music only or for mobile phone handsfree only. This instruction is for advanced users who want to pair the SPH10H-FM to their smartphones only with one selective profile: A2DP stereo for music or HFP for phone call.
SPH10H-FM 7.2 HFP for Phone Call Only 1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps. 2. Within 2 seconds, tap the Phone Button again, then the LED turns to blue flashing and the beeps turn to multiple mid-tone beeps. You will hear a voice prompt saying “Phone selective pairing”. 3. Search for Bluetooth devices on your smartphone. Select the Sena SPH10H-FM in the list of devices detected on your phone. 4.
SPH10H-FM 5. The intercom pairing queue is ‘Last-Come, FirstServed’. If a headset has multiple paired headsets for intercom conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second intercom friend, and third intercom friend. A D B C Note: Pairing A & B 4. Y ou can make other pairings between the headset A and C, and between the headset A and D by following the same procedure as above. A C Pairing A & C 16 8.
SPH10H-FM You can set the configuration of the SPH10H-FM by the voice menu instruction as below. 1. To enter into voice configuration menu, press and hold the Jog Dial for 12 seconds until the LED shows solid blue and you hear high tone double beeps. You will also hear a voice prompt saying “Configuration menu”. 2. Rotate the Jog Dial clockwise or counter-clockwise to navigate between the menus. You will hear voice prompts for each menu items as below. 3.
SPH10H-FM you can answer the phone by saying “Hello” or any other word loudly. This is enabled from the factory but you can disable this. If this mode is disabled, you have to tap the Jog Dial or the Phone Button to answer an incoming call. 9.
SPH10H-FM Voice Prompt “RDS AF setting” Factory Default Disable Enable Tap the Phone Button Disable Tap the Jog Dial RDS AF allows a receiver to re-tune to a different frequency providing the same station has an additional frequency. In RDS AF, the receiver will “re-tune” to the second frequency location when the first signal becomes too weak. With RDS AF enabled on the receiver, a radio station with more than one frequency can be used.
SPH10H-FM Rotate Jog Dial Tap Phone Button Tap Jog Dial VOX Phone Enable Disable VOX Intercom Enable Disable Voice Prompt Enable Disable RDS AF Setting Enable Disable Delete All Pairings Execute N/A Exit Configuration Execute N/A Voice Configuration Menu & Button Operations 10.
SPH10H-FM You can listen to stereo music from your Bluetooth wireless audio device. The Bluetooth audio device must be paired with the SPH10H-FM by following the “Bluetooth Stereo Device Pairing” procedures described in the 6.2 chapter. The SPH10H-FM supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the SPH10H-FM to remotely control music playback.
SPH10H-FM 12. MOBILE PHONE CALL MAKING AND ANSWERING 1. When you have an incoming call, simply tap the Phone Button or the Jog Dial to answer the call. 2. You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone Answering is enabled. 3. To end a call, tap the Phone Button or press the Jog Dial for 2 seconds until you hear a beep, or wait for the called person to end the call. 4.
SPH10H-FM in this case. English 13. TWO-WAY INTERCOM 13.1 Start and End Two-way Intercom Terminate 1. You can start an intercom conversation with one of any intercom friends by tapping the Jog Dial: single tapping to intercom with the first intercom friend, double tapping with the second intercom friend, and triple tapping with the third intercom friend.
SPH10H-FM Button. When you hang up the phone call, the intercom will automatically be recovered. b. To reject the phone call and stay on the intercom conversation, press the Jog Dial for 2 seconds until you hear a beep. U nlike other motorcycle Bluetooth headsets, this prevents a user from being dropped out of an intercom conversation by an incoming mobile call. 2.
SPH10H-FM English 14. THREE-WAY CONFERENCE INTERCOM 14.
SPH10H-FM 2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with the intercom friend (B). Or intercom friend (B) may start an intercom call with you (A). 4. Now you (A) and two SPH10H-FM intercom friends (B & C) are having a three-way conference intercom. (A) (A) First Friend (B) First Friend (B) Second Friend (C) 3. The second intercom friend (C) may join the intercom by making an intercom call to you (A).
SPH10H-FM Jog Dial Operation Press for 1” Result Disconnect (B) & (C) Single tap Disconnect (B) Double tap Disconnect (C) End Three-way Intercom 15. FOUR-WAY CONFERENCE INTERCOM English However, you still have the intercom connection with your second intercom friend (C). 15.1 Start Four-way Intercom You can have four-way conference intercom with three other SPH10H-FM users by adding one more intercom participant to the three-way intercom.
SPH10H-FM intercom or just disconnect a single intercom connection. 1. Press the Jog Dial for 1 second until you hear a beep to terminate four-way conference intercom. It terminates the intercom connections between you (A), and your intercom friends (B) and (C). 2. Tap or double tap the Jog Dial to disconnect the intercom connection with one of the two intercom friends accordingly.
SPH10H-FM When you try to start an intercom conversation with an intercom friend who is already having a conference intercom with other riders or a mobile phone call, you will hear a low tone double beep signifying an intercom busy signal. In this case, you have to try again later. 18. INTERCOM RECONNECTION If your intercom friend goes out of range while having an intercom conversation, you may hear static noise and eventually the intercom will be disconnected.
SPH10H-FM 1. Rotate while pressing the Jog Dial clockwise to search up the station dial or counter clockwise to search down the station dial. 2. If the tuner finds a station while searching frequencies, it stops the seek function. 3. To save the current station, press and hold the Jog Dial for 2 seconds until you hear a voice prompt saying “Preset (#)”. 4.
SPH10H-FM 19.5 Temporary Preset With the temporary preset function, you may temporarily preset stations automatically without changing the existing preset stations. Tap the Phone Button three times which will automatically scan for 10 temporary preset stations. The temporary preset stations will be cleared when the system is powered off. Region Frequency Range Step Worldwide 76.0 ~ 108.0 MHz ± 100 kHz Americas 87.5 ~ 107.9 MHz ± 200 kHz Asia 87.5 ~ 108.0 MHz ± 100 kHz Australia 87.5 ~ 107.
SPH10H-FM 20. RESET TO FACTORY DEFAULT SETTINGS 1. To restore the SPH10H-FM to factory default settings, press and hold the Phone Button for 12 seconds until the LED shows solid red and you hear double beeps. You will hear a voice prompt saying “Factory reset”. 2. Within 5 seconds, press the Jog Dial to confirm reset. The headset will be restored to factory setting and switched off automatically. You will hear a voice prompt saying “Headset reset, good-bye”. 3.
SPH10H-FM The SPH10H-FM supports firmware upgrade function. Please visit Sena Bluetooth web site at www.senabluetooth.com to check the latest software downloads. 23. CASE STUDY English 22. FIRMWARE UPGRADE Case 1 • iPhone for mobile phone call and stereo music streaming •ZumoTM 550 or ZumoTM 220 for GPS voice instruction •SPH10H-FM for two-way intercom iPhone Mobile Call Pairing: 6.1 Music Intercom Conversation SPH10H-FM Pairing: 8.1 GPS Voice TM SPH10H-FM Pairing: 6.3.
SPH10H-FM Case 2 Case 3 • iPhone for mobile phone call and stereo music streaming • ZumoTM 660/665 for GPS voice instruction •SPH10H-FM for two-way intercom •iPhone for mobile phone call via Zumo 660/665 • ZumoTM 660/665 for GPS voice instruction and stereo music streaming •SPH10H-FM for two-way intercom ZumoTM 660/665 iPhone Mobile Call Music Pairing: 6.1 GPS Voice Mobile Call Pairing: 6.1 Music Intercom Conversation SPH10H-FM 34 Pairing: 8.1 GPS Voice SPH10H-FM Pairing: 6.3.
SPH10H-FM Case 4 Case 5 •iPhone for mobile phone call •iPod Touch for stereo music streaming •TomTom® Rider2 for GPS voice instruction •SPH10H-FM for two-way intercom Feature Phone iPhone Mobile Pairing: 6.1 Call Intercom Conversation SPH10H-FM Pairing: 8.1 Mobile Pairing: 7.2 Call Music SPH10H-FM English •Feature phone for mobile phone call •iPod Touch for stereo music streaming • Two other SPH10H-FM for three-way conference intercom Pairing: 6.2 Intercom Conversation Pairing: 8.
SPH10H-FM Case 6 •iPhone for mobile phone call and stereo music streaming •Sena SR10 for two-way radio, GPS voice instruction, and radar detector alarm •SPH10H-FM for two-way intercom iPhone Two-way radio Wired Connection Mobile Call Pairing: 6.1 Music Tow-way radio GPS Voice Alarm SPH10H-FM Pairing: 6.4 Intercom Pairing: 8.
SPH10H-FM These suggestions apply equally to the headset main unit, earpads, or power charger. The Product should be treated with care and the following suggestions will help you protect your warranty coverage. 1. Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. 2. Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and wrap or melt certain plastics. 3.
SPH10H-FM DISPOSAL CERTIFICATION AND SAFETY APPROVALS The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available.
SPH10H-FM FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
SPH10H-FM Bluetooth License The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Other trademarks and trade names are those of their respective owners. The product is compliant with and adopts the Bluetooth® Specification 3.0 and has successfully passed all interoperability tests that are specified in the Bluetooth® specification. However, interoperability between the device and other Bluetooth®-enabled products is not guaranteed.
SPH10H-FM By way of purchasing this Device and not returning it for a full refund (see below), you are irrevocably releasing, indemnifying from any liability, loss, claim and expense (including attorney’s fees) and holding Sena harmless for any bodily injuries, harm or death as well as losses or damages in goods, to any Vehicles including your own, or to any property or asset that belong to you or to third parties, any of which may result from using the Device under any circumstances or conditions and irre
SPH10H-FM before or during the use of the Device. 4.
SPH10H-FM Limitation of Liability EXCEPT AS EXPRESSLY PROVIDED HEREIN, SENA MAKES NO WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED, WITH RESPECT TO ANY EQUIPMENT, PARTS OR SERVICES PROVIDED PURSUANT TO THIS AGREEMENT, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
SPH10H-FM WARNING Sena informs that using this device in public traffic may not be authorized by the law. Please check your local law and use this device only out of public traffic such as private properties or closed circuits. If the simultaneous use of both ear speakers while riding a motorcycle is prohibited by your local law, please use only a single ear speaker while riding. Sena denies any liability should you choose not to respect this warning.
1.0.0 www.senabluetooth.com User's Guide for Firmware v4.