User Manual

ManualsBrandsSENA ManualsElectronics10C EVO

10C Evo

10C Evo Manual

Motorcycle Bluetooth Communication & Camera System

1. Turning On/Off the Headset

To power on the headset, press the Jog Dial and the Phone Button at the same time until the blue LED

appears. To power off the headset, press the Jog Dial and the Phone Button at the same time until the

red LED appears briefly.

2. Adjusting Volume

You can easily adjust the volume by rotating the Jog Dial.

3. Checking the Battery Level

When the headset is powering on, the red LED flashes rapidly indicating the battery level.

4 flashes = High, 70~100%

3 flashes = Medium, 30~70%

2 flashes = Low, 0~30%

When you power on the headset, keep pressing the Jog Dial and the Phone Button simultaneously for

about 3 seconds until you hear high tone triple beeps. Then you will hear a voice prompt indicating the

battery level is high, medium, or low.

4. Charging the Battery

You can charge the headset by connecting the supplied USB power & data cable into a computer’s USB

port or USB wall charger. The LED turns red while the headset is charging and turns blue when it is fully

charged. It takes about 3.5 hours to be completely charged.

5. Pairing with Mobile Devices - Phone, Music

1. Press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately and you

hear multiple beeps.

Summary of content (6 pages)

PAGE 1
0C Evo 10C Evo Manual Motorcycle Bluetooth Communication & Camera System 1. Turning On/Off the Headset To power on the headset, press the Jog Dial and the Phone Button at the same time until the blue LED appears. To power off the headset, press the Jog Dial and the Phone Button at the same time until the red LED appears briefly. 2. Adjusting Volume You can easily adjust the volume by rotating the Jog Dial. 3.
PAGE 2
. Search for Bluetooth devices on your mobile phone. Select the Sena 10C Evo in the list of the devices detected on the mobile phone. 6. Using Phone Features Answering Calls: Tap the Phone Button or the Jog Dial to answer the call. Ending Calls: Tap the Phone Button or press the Jog Dial for 2 seconds until you hear a beep Rejecting Calls: Press the Jog Dial for 2 seconds until you hear a beep while the phone is ringing. Transferring Calls: Press the Phone Button for 2 seconds until you hear a beep. 7.
PAGE 3
13. Turning On/Off the FM Radio To turn on the FM radio, press and hold the Phone Button for 2 seconds until you hear a mid-toned double beep sound. 14. Seeking Stations Rotate while pressing the Jog Dial clockwise to search up the station dial or counter clockwise to search down the station dial. 15. Listening to Preset Stations Tap the Phone Button once to go upward to your next saved preset station. 16. Saving or Deleting Stations 1.
PAGE 4
padding and external shell of the left side of the helmet. 3. Tighten the two screws until the clamp unit is fastened firmly to the helmet. 4. Insert a microSD card into the card slot to use camera. 5. Attach the main unit to the clamp unit until you hear a click.
PAGE 5
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 6
IC Caution: - English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. - French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.