Manual Charging Red LED: Charging Blue LED: Fully charged Power On/Off Power On : Center Button and Mesh Button for 1 sec Power Off : Tap the Center Button and Mesh Button Volume Adjustment
(+) Button - Increase the volume (-) Button - Decrease the volume Battery Check Phone, Music Pairing Initially Pairing the headset The headset will automatically enter the phone pairing mode when you initially turn on the headset or in the following situation: • Rebooting after executing Factory Reset 1. Press and hold the Center Button and Mesh Button for 1 second. 2. Search for Bluetooth devices on your mobile phone. Select the ORCA1 in the list of the devices detected on the mobile phone. 3.
Mobile Phone Call Making and Answering Answering a call: Tap the Center Button Ending a call: Press the Center Button for 2 seconds. Voice dial: Press the Center Button for 3 seconds. Speed dial: Press the (+) Button for 3 seconds. Rejecting a call: Press the Center Button for 2 seconds. Mesh Intercom On/Off Mesh Intercom On : Tap the Mesh Button. Mesh Intercom Off : Tap the Mesh Button. Setting Configuration Menu: Press the Center Button for 10 seconds.
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
pour satisfaire à la conformité d'exposition RF. L'antenne utilisée pour cet émetteur ne doit pas émettre simultanément avec d'autres antennes ou émetteurs, sauf en conformité avec les procédures FCC relatives aux produits multi-émetteurs. Lorsque équipé, la distance entre l’antenne et la surface de la tête est de 15.