www.senabluetooth.
SMH5 Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH5™, SPH10™, SPH10S™, SPH10H™, SR10™, SM10™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Other trademarks and tradenames are those of their respective owners.
SMH5 CONTENTS 1. 2. 3. 4. INTRODUCTION PACKAGE CONTENTS INSTALLING THE SMH5 ON YOUR HELMET POWERING ON/OFF AND CHARGING 4.1 4.2 4.3 4.4 Powering On Powering Off Charging Low Battery Warning 5. CHECKING THE BATTERY LEVEL 5.1 LED Indicator 5.2 Voice Indicator 6. PAIRING THE SMH5 WITH BLUETOOTH DEVICES 6.1 Mobile Phone Pairing 6.2 Bluetooth MP3 Player Pairing 6.3 Bluetooth GPS Navigation Pairing 7. PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE 7.1 A2DP Stereo Music Only 7.
SMH5 Thank you for choosing the Sena SMH5, Bluetooth Stereo Headset and Intercom for scooters and motorcycles. With the SMH5, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigation by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other riders. The SMH5 is compliant with the Bluetooth Specification 3.
SMH5 2.
SMH5 English 3. INSTALLING THE SMH5 ON YOUR HELMET 1. Loosen the two screws on the back plate of the clamp using the enclosed Allen Wrench. Insert the back plate of the clamp unit between the internal padding and external shell of the helmet, and tighten the two screws.
SMH5 2. Attach the headset main unit to the clamp. Insert the main unit in the clamp until you feel the click that signals a secure attachment. 3. If you have any problem mounting the clamp unit on the helmet for any reason, you may use the glued surface mounting plate which can be attached to the external surface of the helmet. Locate a proper surface on the helmet to attach the unit, clean the helmet surface location with a moistened towel, and allow to dry thoroughly.
SMH5 In the case of the wired microphone included in the “Full-face Helmet Kit”, attach the enclosed velcro pad for wired microphone to the inside of the chin guard for full-face helmets. Place the wired microphone on the velcro pad and attach it to the connector of the speaker cable. 6. When you use the boom microphone included in the “Basic Kit”, please make sure that the fin side of the microphone is facing outward; away from your lips. You can easily recognize it by touching the fin with your fingers.
SMH5 4. POWERING ON/OFF AND CHARGING To power on and off the headset, you don’t need to press and hold any button for several seconds. Just short press the Jog Dial and the Phone Button simultaneously, and you will get quick on-and-off convenience. 4.1 Powering On Press the Jog Dial and the Phone Button at the same time for about 1 second to power on. The blue LED turns on and you will hear ascending beeps. 4.
SMH5 You can check the battery level in two different ways when the headset is powering on. 5.1 LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level . 4 flashes = High, 70~100% 3 flashes = Medium, 30~70% 2 flashes = Low, 0~30% 5.2 Voice Prompt Indicator When you power on the headset, keep pressing the Jog Dial and Phone Button simultaneously for about 3 seconds until you hear three high tone beeps.
SMH5 PIN. 4. The mobile phone confirms that pairing has completed and the SMH5 is ready to use. You will hear a voice prompt from the SMH5 saying “Your headset is paired”. 5. If the pairing process is not completed within three minutes, the SMH5 will return to stand-by mode . 6.2 Bluetooth Stereo Device Pairing 1. If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you don’t need to pair the SMH5 with it separately.
SMH5 If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the SMH5 for A2DP stereo music only or for mobile phone handsfree only. This instruction is for advanced users who want to pair the SMH5 to their s martphones only with one selective profile: A2DP for stereo music or HFP for phone call. If you have previously paired a mobile phone to the SMH5, you must clear the previous paring list on both devices; the mobile phone and SMH5.
SMH5 A 8. PAIRING WITH OTHER SMH5 HEADSETS FOR INTERCOM CONVERSATION The SMH5 can be paired with up to three other headsets for Bluetooth Intercom conversation. 1. Turn on the two SMH5 headsets (A and B) that you would like to pair with each other. 2. Press and hold the Jog Dial of the headset A and B for 5 seconds until red LEDs of the both units start to flash rapidly. You will hear a voice prompt saying “Intercom pairing”. 3.
SMH5 Note: For example, after the pairing procedures listed above, headset D is the of headset A. Headset C is the of headset A, and headset B is the of headset 9. PAIRING WITH OTHER SENA HEADSET MODELS FOR INTERCOM CONVERSATION English 5. The intercom pairing queue is ‘Last-Come, First-Served’. If a headset has multiple paired headsets for intercom conversations, the last paired headset is set as . The previous Intercom friend becomes , and .
SMH5 10. USING THE SMH5 10.1 Volume Adjustment You can easily adjust the volume by rotating the Jog Dial. You will hear a beep when the volume reaches maximum or minimum level. The volume is set and maintained independently at different levels for each audio source even when you turn off and on the headset. For example, once you set the volume for mobile phone handsfree, it will not change even if you adjust the volume when you hear Bluetooth MP3 music.
SMH5 English 1. Press and hold the Phone Button for 8 seconds until the red LED is rapidly flashing. When you do this, after first 5 seconds you press the button, you will see the headset enter into the Mobile Phone Pairing sequence, but you have to keep pressing the button for another 3 seconds until the red LED flashes rapidly. You will hear a voice prompt saying “VOX phone”. 2. To disable, tap the Jog Dial within 10 seconds, then you will hear a single beep and the red LED flashes for 2 seconds.
SMH5 10.6 Intercom Failure Terminate a. To answer the phone call and stop the intercom conversation, tap the Jog Dial or the Phone Button. When you hang up the phone call, the intercom will automatically be recovered. b. To reject the phone call and stay on the intercom conversation, press the Jog Dial for 2 seconds until you hear a beep. Unlike other motorcycle Bluetooth headsets, this prevents a user from being dropped out of an intercom conversation by an incoming mobile call. 2.
SMH5 - To track forward or track back, rotate while pressing the Jog Dial clockwise or counter clockwise. English you can use the SMH5 to remotely control music playback. So, You not only can adjust the volume but also use the functions such as play, pause, next track and previous track. - To adjust the volume, rotate the Jog Dial. 10.9 Function Priority - To play or pause music, press and hold the Jog Dial for 1 second until you hear a double beep.
SMH5 10.10 Enabling/Disabling Voice Prompts (Factory Default: Enabled) The voice prompt feature is enabled from the factory, and is enabled or disabled by the following procedures. 1. Press and hold the Jog Dial for 8 seconds until the blue LED is rapidly flashing and you hear a mid-tone double beep. You will also hear a voice prompt saying “Voice prompt”. 2. To disable, tap the Jog Dial within 10 seconds, then you will hear a single beep and the red LED flashes for 2 seconds.
SMH5 11. FIRMWARE UPGRADE English hole and press the reset button for a second with light pressure. The SMH5 will be switched off after which time, you have to turn the system back on and try again. However, this will not restore the headset to factory default settings. The SMH5 supports firmware upgrade function. Please visit Sena Bluetooth web site at www.senabluetooth.com to check the latest software downloads.
SMH5 12.
SMH5 DISPOSAL The Product should be treated with care and the following suggestions will help you protect your warranty coverage. 1. Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. 2. Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and wrap or melt certain plastics. 3. Do not store the device in cold areas.
SMH5 CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.
SMH5 WAIVER AND GENERAL RELEASE Industry Canada Statement By using the product you waive all substantial legal rights including the right to sue. Please read the following carefully before using the device. If you do not accept all terms of this agreement, you should immediately return the product for a full refund. By using the headset you agree to be bound to this agreement and forfeit the right to sue.
SMH5 By way of purchasing this Device and not returning it for a full refund (see below), you are irrevocably releasing, indemnifying from any liability, loss, claim and expense (including attorney’s fees) and holding Sena harmless for any bodily injuries, harm or death as well as losses or damages in goods, to any Vehicles including your own, or to any property or asset that belong to you or to third parties, any of which may result from using the Device under any circumstances or conditions and irrespecti
SMH5 Two-Year Limited Warranty Sena Technologies, Inc. (“Sena”) warrants that this product (“Product”) shall conform to and perform in accordance with published technical specifications and the accompanying written materials, and shall be free of defects in materials and workmanship, for a period of two (2) year from the date of purchase by the first consumer purchaser of the Product.
SMH5 THE USE OF FURNISHING OF EQUIPMENT, PARTS OR SERVICES HEREUNDER OR THE PERFORMANCE, USE OR INABILITY TO USE THE SAME, EVEN IF SENA OR ITS DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL SENA OR ITS DEALERS TOTAL LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT.
1.1.0 www.senabluetooth.com User's Guide for Firmware v1.