www.sena.
SMH10 © 1998-2014 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc. reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH10R™, SMH5™, SMH5-FM™, SMH3™, SPH10™, EXPAND™, SPH10H™, SPH10H-FM™, SPH10S™, SR10™, SR10i™, SM10™ are trademarks of Sena Technologies, Inc. or its subsidiaries.
SMH10 English CONTENTS 1. INTRODUCTION................................................................................ 5 8. INTERCOM PAIRING....................................................................... 18 2. PACKAGE CONTENTS...................................................................... 6 3. INSTALLING THE SMH10 ON YOUR HELMET................................ 7 8.1 Pairing with Other SMH10 Headsets for Intercom Conversation.... 18 8.
SMH10 13. TWO-WAY INTERCOM.................................................................... 27 13.1 13.2 13.3 13.4 Start and End Two-way Intercom.................................................... 27 Intercom and Mobile Phone Call.................................................... 28 Intercom and GPS ......................................................................... 28 Intercom and Two-way Radio......................................................... 29 14.
SMH10 Thank you for choosing the Sena SMH10, Bluetooth Stereo Headset and Intercom for Motorcycles. With the SMH10, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders. The SMH10 is compliant with the Bluetooth 3.
SMH10 2.
SMH10 • Cigarette Charger • 3.5mm Stereo Audio Jack Cable • Glued Surface Mounting Adapter • Microphone Sponges 3. INSTALLING THE SMH10 ON YOUR HELMET English • USB Power & Data Cable To securely install the SMH10 on the helmet, please follow the procedure. 1. Loosen the two screws on the back plate of the speakermicrophone clamp unit using the enclosed Allen Wrench. Insert the back plate of the clamp unit between the internal padding and external shell of the helmet, and tighten the two screws.
SMH10 2. Please adjust the direction of the microphone so that the fin side of the microphone is facing outward; away from your lips. You can easily recognize it by touching the fin with your fingers. facing close to your mouth when you wear the helmet. You can use the enclosed velcro pad and holder for the boom microphone to ensure secure placement.
SMH10 4. If you have any problem to clamp the speaker-microphone unit on the helmet for any reason, you may use the glued surface mounting adapter to attach the speaker-microphone clamp unit on the external surface of the helmet. • Remove the back plate of the speaker-microphone clamp unit by loosening the two screws with the enclosed Allen Wrench. • Attach the glued external adapter to the speaker-microphone clamp unit by tightening the two screws instead of the removed back plate.
SMH10 6. To remove the main headset from the speaker-microphone clamp unit, hold the lower part of the speaker-microphone clamp unit with your thumb and gently press down the hook on the upper part of the headset main unit with your index finger until it clicks out. You may have to do this to charge up or to carry the headset main unit. 4. POWERING ON/OFF AND CHARGING To power on and off the headset, you don’t need to press and hold any button for several seconds.
SMH10 4.4 Low Battery Warning 4.5 Checking the Battery Level You can check the battery level in two different ways when the headset is powering on. 4.5.1 LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level. 5. VOLUME ADJUSTMENT English When the battery is low, the blinking blue LED in stand-by mode turns to red and you will hear mid-tone triple beeps and a voice prompt saying “Low battery”. You can easily adjust the volume by rotating the Jog Dial.
SMH10 6. PAIRING THE SMH10 WITH BLUETOOTH DEVICES Before using the SMH10 Bluetooth headset with any of Bluetooth devices for the first time, you need to do the pairing operation. It can be paired with Bluetooth mobile phones, Bluetooth stereo devices such as MP3, or motorcycle specific Bluetooth GPS, and with other Sena Bluetooth headsets. This pairing operation is only required once for each Bluetooth device.
SMH10 6.3 Bluetooth Stereo Device Pairing 1. If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you don’t need to pair the SMH10 with it separately. When the SMH10 is paired with the mobile phone, it is also paired as a stereo music device. 2. If you have a stand alone Bluetooth stereo device, follow the paring procedure separately. The procedure is the same as the procedure in “6.1 Mobile Phone Pairing”. Note: English 4. Enter 0000 for the PIN.
SMH10 1. Turn on the headset and press the Jog Dial for 5 seconds until the red LED is rapidly flashing and you hear multiple beeps. 2. Within 2 seconds, tap the Phone Button again, then the LED turns to blue flashing and the beeps turn to high tone double beeps. You will hear a voice prompt saying “Multipoint pairing”. 3. Search for Bluetooth devices on the GPS navigation screen. Select the Sena SMH10 in the list of the devices detected on the GPS. 4. Enter 0000 for the PIN. 5.
SMH10 GPS HFP Mobile Phone + Pairing (A2DP) HFP SMH10 Multipoint Pairing Mobile Phone GPS Pairing as Mobile Phone Note: You have to use a motorcycle specific GPS which transmits turn-byturn voice instruction to the headset by Bluetooth. Most automotive GPS systems don’t have this feature. The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses HFP as do most motorcycle specific GPS navigation systems.
SMH10 The incoming audio from the two-way radio via SR10 is heard in the background while having an intercom conversation or a mobile phone call. You can listen to music, answer a mobile call, have an intercom conversation and use a two-way radio via SR10 for group communication as shown in the figure below. A GPS navigation or a radar detector could be connected to the SR10 by wire.
SMH10 If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the SMH10 for A2DP stereo music only or for mobile phone handsfree only. This instruction is for advanced users who want to pair the SMH10 to their smartphones only with one selective profile: A2DP stereo for music or HFP for phone call. If you have previously paired a mobile phone to the SMH10, you must clear the previous paring list on both devices; the mobile phone and SMH10.
SMH10 A 8. INTERCOM PAIRING B 8.1 Pairing with Other SMH10 Headsets for Intercom Conversation The SMH10 can be paired with up to three other headsets for Bluetooth intercom conversation. 1. Turn on the two SMH10 headsets (A and B) that you would like to pair with each other. 2. Press and hold the Jog Dial of the headset A and B for 5 seconds until red LEDs of the both units start to flash rapidly. You will hear a voice prompt saying “Intercom pairing”. 3.
SMH10 Note: For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is the second intercom friend of headset A, and headset B is the third intercom friend of headset A. 8.2 Pairing with Other Sena Headset Models for Intercom Conversation The SMH10 can be paired with all other Sena headset models such as the SMH5 and the SPH10 for intercom conversation. Please follow the same procedure as above to pair with these headset models.
SMH10 The voice prompt for each menu item is as below: (1) Speed dial (5) Sidetone (2) VOX phone (6) Noise control (3) VOX intercom (7) Delete all pairings (4) Voice prompt (8) Exit configuration Speed dial VOX phone Exit configuration Delete all pairings VOX intercom Noise control Voice prompt Sidetone 9.1 Assigning Speed Dial Voice Prompt 20 1. To assign a phone number as a speed dial, rotate the Jog Dial until you hear a voice prompt saying “Speed dial”. 2.
SMH10 9.2 Enabling/Disabling Voice Activated Phone Answering “VOX phone” Factory Default Enable Enable Tap the Phone Button Disable Tap the Jog Dial If this feature is enabled, you can answer incoming calls by simply saying a word loudly enough. For example, when you hear a series of beeps for an incoming call, you can answer the phone by saying “Hello” or any other word loudly. This is enabled from the factory but you can disable this.
SMH10 - Voice prompts for battery level Indicator - Voice prompts for factory reset When Advanced Noise Control is enabled, the background noise is reduced during an intercom conversation. When it is disabled, the background noise is mixed with your voice during intercom. 9.
SMH10 9.8 Exit Voice Configuration Menu “Exit configuration” Factory Default N/A Execute Tap the Phone Button To exit voice configuration menu and get back to stand-by mode, rotate the Jog Dial until you hear a voice prompt saying “Exit configuration”, and tap the Phone Button to confirm. Tapping the Jog Dial is not available for this setting.
SMH10 11. STEREO MUSIC You can listen to stereo music in two ways: with the enclosed stereo audio cable or by Bluetooth wireless stereo. Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the SMH10 to remotely control music playback. You not only can adjust the volume but also use the functions such as play, pause, next track and previous track. 1. To adjust the volume, rotate the Jog Dial. 11.
SMH10 12. MOBILE PHONE CALL MAKING AND ANSWERING English 3. To track forward or track back, rotate while pressing the Jog Dial clockwise or counter clockwise. 12.1 Mobile Phone Call Making and Answering Note: Bluetooth music is available only when the MP3 jack port remains open. Please make sure the audio cable is unplugged from the clamp unit to play music by Bluetooth. 1. When you have an incoming call, simply tap the Phone Button or the Jog Dial to answer the call. 2.
SMH10 • Tap the Phone Button in stand-by mode to activate the voice dialing of your mobile phone. For this, the voice dialing feature must be available on the mobile phone. Refer to your mobile phone manual for further instruction. 3. Tap the Phone Button or the Jog Dial to select a voice menu among the followings: Note: 1.
SMH10 End Tap Phone Button or Tap Jog Dial or Say “Hello” Tap Phone Button or Press Jog Dial for 2” 13. TWO-WAY INTERCOM English Answer Reject Press Jog Dial for 2” 13.1 Start and End Two-way Intercom Transfer Press Phone Button for 2” 1. You can start an intercom conversation with one of any intercom friends by tapping the Jog Dial: single tapping to intercom with the first intercom friend, double tapping with the second intercom friend, and triple tapping with the third intercom friend.
SMH10 2. To terminate an intercom conversation, single tap the Jog Dial. Any intercom connection with any intercom friend will be terminated by a single tapping. A double or triple tapping will do nothing in this case. Terminate End Two-way Intercom Conversation Start intercom End intercom 1st intercom friend 2nd intercom friend 3rd intercom friend Single tap Double tap Triple tap Single tap a. To answer the phone call and stop the intercom conversation, tap the Jog Dial or the Phone Button.
SMH10 English GPS Smart Phone Voice Multipoint Instruction Pairing HFP Mobile Phone Pairing Smart Phone HFP + Mobile Phone Pairing A2DP Intercom SMH10 Intercom Pairing Two-way Radio Wired Connection Audio from Two-way Radio Sena SR10 Intercom Friend SMH10 Multipoint Pairing Intercom and GPS voice instruction 13.4 Intercom and Two-way Radio As described in 6.
SMH10 g rin First Friend (B) g (A) rin You (A) can have a three-way conference intercom with two other SMH10 friends (B & C) by establishing two intercom connections at the same time. While a three-way conference intercom is in progress, mobile phone connection of all three participants would be temporarily disconnected, but as soon as the conference intercom terminates or one of the participants leaves the intercom, all mobile phones would be automatically reconnected.
SMH10 (A) First Friend (B) Second Friend (C) 4. Now you (A) and two SMH10 intercom friends (B & C) are having a three-way conference intercom. (A) 14.2 End Three-way Intercom When you are a member of an active three-way conference intercom, you can completely terminate the conference intercom or just disconnect an intercom connection with one of your active intercom friends. 1. Press the Jog Dial for 1 second until you hear a beep to terminate three-way conference intercom completely.
SMH10 15. FOUR WAY CONFERENCE INTERCOM 15.1 Start Four-way Intercom You can have four-way conference intercom with three other SMH10 users by adding one more intercom participant to the three-way intercom. While you are having three-way intercom as specified in section 14.1, a new participant (D), who is an intercom friend of your intercom friend (C), may join the conference intercom by making an intercom call to your intercom friend (C).
SMH10 You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation. When you terminate music sharing, you can go back to the intercom conversation. To start or terminate sharing music, press and hold the Jog Dial for 1 second during an intercom conversation until you hear a double beep and you and your intercom friend will listen to or terminate sharing music.
SMH10 cannot use multipoint connection devices such as GPS, while a non-Sena headset is turned on. 4. Even though you disconnect the non-Sena headset as a Universal Intercom, it will not automatically restore the multipoint connection. To restore the multipoint connection, you should turn off the non-Sena headset first, then try to connect to multipoint device manually from the device screen or simply reboot the device so that it automatically connects to the Sena headset. 17.
SMH10 g g rin rin Pa i (A) i Pa (A) 3. The Other SMH10 (C) may join the intercom by making an intercom call to you (A). (B) (B) (C) (C) 2. Start an intercom conversation with non-Sena Bluetooth headset (B) in your intercom group. For example, you (A) may start an intercom conversation with non-Sena Bluetooth headset (B). The non-Sena Bluetooth headset (B) may also start an intercom call with you (A). 4.
SMH10 17.4 Four-way Universal Intercom You may make a four-way Universal Intercom connection with a couple of different configurations, 1) three SMH10s and one non-Sena Bluetooth headset or 2) two SMH10s and two non-Sena Bluetooth headsets.
SMH10 (A) (C) (D) (B) You may disconnect a four-way Universal Intercom using the same way as you do in a normal four-way intercom. Please refer to section, 15.2 “End Four-way Intercom”. 17.4.2 Four-way Universal Intercom Case 2 Three SMH10 headsets (A, C and D) and one non-Sena Bluetooth headset (B). The procedure is the same as the case 1 described in section 17.4.1. 18.
SMH10 19. INTERCOM FAILURE When you try to start an intercom conversation with an intercom friend who is already having a conference intercom with other riders or a mobile phone call, you will hear a low tone double beep signifying an intercom busy signal. In this case, you have to try again later. 20. INTERCOM RECONNECTION If your intercom friend goes out of range while having an intercom conversation, you may hear static noise and eventually the intercom will be disconnected.
SMH10 When the SMH10 is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the back of the headset main unit. Insert a paper clip into the reset pinhole and press the reset button for a second with light pressure. The SMH10 will be switched off, and you have to turn the system back on and try again. However, this will not restore the headset to factory default settings. 23. FIRMWARE UPGRADE English 22.
SMH10 24.
SMH10 Case 3 Case 2 English GPS - Mobile Phone Pairing Bluetooth GPS* Bluetooth GPS* Mobile Phone Mobile Phone Pairing Mobile Phone Pairing Intercom Pairing Bluetooth Pairing Procedure 1 GPS - Mobile Phone Pairing 2 Mobile Phone Pairing 3 Intercom Pairing Bluetooth GPS* zumo 550/660/665, TomTom Rider Usage • GPS zumo 660/665: GPS instruction, phone call, listening to music zumo 550, TomTom Rider: GPS instruction, phone call • Intercom Intercom Pairing Multipoint Pairing Mobile Phone Blue
SMH10 Case 4 Case 5 Mobile Phone Mobile Phone Mobile Phone Pairing Mobile Phone Pairing GPS Intercom Pairing Mobile Phone Pairing Intercom Pairing Mobile Phone Pairing Motorcycle Bluetooth Audio System* Bluetooth GPS* Music Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Intercom Pairing Bluetooth GPS* Yupiteru, smartphone apps Usage • Mobile Phone: phone call • GPS: GPS instruction • Intercom 42 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pai
SMH10 Case 6 Mobile Phone English Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Multipoint Pairing 4 Intercom Pairing Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider Mobile Phone Pairing Motorcycle Bluetooth Audio System* BMW R1200RT, K1600GT, K1600GTL Intercom Pairing Mobile Phone Motorcycle Bluetooth Pairing Audio System* Music Usage • Mobile Phone: phone call • Motorcycle Bluetooth Audio System: listening to music • GPS: GPS instruction • Intercom Mul
SMH10 Case 7 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Multipoint Pairing 3 Intercom Pairing Mobile Phone GPS Mobile Phone Pairing SR10 Multipoint Pairing Two-way Radio Intercom Pairing Radar Detector 44 Usage • Mobile Phone: phone call • SR10: two-way radio, GPS guidance, Radar detecting signal • Intercom
SMH10 Case 8 Mobile Phone Pairing Mobile Phone Pairing MP3 Player Intercom Pairing English GPS Mobile Phone Bluetooth GPS* Pairing Mobile Phone Bluetooth Pairing Procedure 1 GPS - Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing 4 Intercom Pairing Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider Usage • GPS: phone call, GPS instruction • MP3 Player: listening to music • Intercom 45
SMH10 Case 9 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing 4 Multipoint Pairing 5 Intercom Pairing Mobile Phone GPS Mobile Phone Pairing SM10 SR10 Multipoint Pairing Mobile Phone Pairing Two-way Radio Intercom Pairing Mobile Phone Pairing Radar Detector 46 Usage • Mobile Phone: phone call • SR10: two-way radio, GPS instruction, Radar detecting signal • SM10: listening to music/sharing • Intercom
SMH10 Case 10 Mobile Phone Mobile Phone Pairing Multipoint Pairing Intercom Pairing Mobile Phone Pairing English Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing 4 Multipoint Pairing 5 Intercom Pairing Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider Bluetooth GPS* Usage • Mobile Phone: phone call • GPS: GPS instruction • SM10: listening to music/sharing • Intercom Mobile Phone Pairing SM10 OR Motorcycle Audio System MP3 Player 47
SMH10 25.
SMH10 FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules.
SMH10 Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Bluetooth License The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license.
SMH10 • When using the product, drive at a low speed (slower than 35km/h) for safety. In addition, be certain to conform to laws regarding the use of communications devices while driving. • Do not put the product where it may hamper the driver's vision or manipulate it while driving. This may cause traffic accidents. • Before driving, fasten the product to the helmet, and double-check that it is fastened. Separation of the product while driving may cause damage to the product or accidents.
SMH10 • Store the battery at temperatures of 15°C~25°C (59°F~77°F). Higher or lower temperatures may reduce the capacity and life of the battery, or may cause temporary non-operation. Do not use the product in sub-zero temperature, because it may cause serious reduction of the battery performance. • If you apply heat to the battery or throw it into fire, it may explode. • Do not use the product with a damaged battery. It may explode and/ or cause accidents. • Never use a damaged charger.
SMH10 Notice and Waiver By buying and using this product, you relinquish considerable legal rights including any claim for compensation for damages. Therefore, be certain to read and understand the following terms and conditions before using the product. Use of this product will constitute consent to this agreement, and forfeiture of rights to all claims. If you do not consent to all the terms and conditions of this agreement, return the product for a refund. (Refer to the section “Return for Full Refund”.
SMH10 6. You must read and completely understand all terms and conditions of legal rights and warnings that are involved in using the product. In addition, usage of the product constitutes acceptance of all terms and conditions regarding waiver of rights. Warranty Exclusions Reasons for Limited Liabilities If you do not return the product after purchasing it, you relinquish all rights to liabilities, loss, claims, and claims for reimbursement of expenses (including attorney's fees).
SMH10 Return for Full Refund Should you not agree to the terms and conditions explained above, you may return the product for a full refund. To get a refund, within 14 days from the purchase date you must return the product to the seller in such a condition as it was purchased. Unless you return the product within 14 days from the purchase date, you will have read and agreed to all the terms and conditions explained above, and Sena will not be liable for any claim for damages related with the product.
3.4.1 www.sena.com User's Guide for Firmware v5.