User’s Guide SM10 Dual Stream Bluetooth® Stereo Transmitter www.sena.
Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH5™, SPH10™, SPH10S™, SPH10H™, SR10™, SM10™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Harley-Davidson® is a registered trademarks of H-D Michigan, Inc. and Harley-Davidson, Inc.
CONTENTS 1. INTRODUCTION · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 6 2. PACKAGE CONTENTS · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 8 3. INSTALLING THE SM10 · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 10 3.1 Installing on the Handle Bar · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 10 3.
BATTERY INFORMATION · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 20 MAINTENANCE AND CARE · · · · · · · · · · · · · · · · · · · · · · · · · · · · 21 DISPOSAL · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 22 CERTIFICATION AND SAFETY APPROVALS · · · · · · · · · · · · · 23 • FCC Compliance Statement · · · · · · · · · · · · · · · · · ·
1. INTRODUCTION Thank you for choosing the Sena SM10. The SM10 is a Bluetooth dual stream stereo transmitter based on Bluetooth 2.1+EDR technology. You can connect various audio devices such as mobile phone or MP3 player by using the SM10. It also supports onboard audio systems of specific brands by using optional audio cables.
English SM10 features: • Dual audio streams for two Bluetooth headsets • Auxiliary stereo input for GPS or radar/laser detector • Water resistant for use in inclement weather • Optional interface cable for onboard motorcycle audio systems of Harley-Davidson and Honda Gold Wing • Firmware upgradeable • Two-year limited warranty Technical Specifications: • Bluetooth 2.
2.
• USB Power & Data Cable English • Cigarette Charger • Audio Cable 3.5mm 4 pole • Audio Cable 3.
3. INSTALLING THE SM10 3.1 Installing on the Handle Bar 1. Attach the mounting kit on the back of the SM10 along the guide rail. 2. Place the main unit on the handle bar, wind the rubber band around the handle bar, and hang it on the hook. 3.2 Placing on the Mounting Cradle (optional) 1. Locate a proper surface on your motorcycle body, clean the body surface location with a moistened towel, and allow to dry thoroughly 2.
4. POWERING ON/OFF AND CHARGING English 4.1 Power ON & OFF To power on the SM10, slide the Power Switch to on. The Blue and Red LEDs will turn on. To power off, slide the Power Switch to off. 4.2 Battery Check You can check the battery level when the SM10 is powering on. 4.2.1 LED Indicator When the SM10 is powering on, the Red LED flashes rapidly indicating the battery level. 4 flashes = High, 70~100% 3 flashes = Medium, 30~70% 2 flashes = Low, 0~30% 4.
4.4 Low Battery Warning When the battery is running low, the Red and Blue LED will flash.
English 5. PAIRING THE SM10 WITH OTHER BLUETOOTH DEVICES The SM10 must be paired with a Bluetooth headset to stream audio from the non-Bluetooth audio source. If you want to stream audio to two separate headsets, you need to perform a pairing for both headsets. Please take the following steps to pair with your Bluetooth headsets. 5.1 Bluetooth pairing with the first headset 1. Turn on the Bluetooth headset (Refer to the headset user guide). 2.
5.2 Bluetooth pairing with the second headset 1. Turn on the second Bluetooth headset. (Refer to the headset user guide). 2. Place the second Bluetooth headset in pairing mode (Refer to the headset user guide). 3. Press the Pairing Button for 9 seconds until the Red LED is rapidly flashing. 4. The SM10 will detect the Bluetooth headset nearby and connection will be made accordingly. 5. If the second headset is connected, the Red LED will slowly flash.
6. USING THE SM10 English 6.1 Connections The SM10 has one AUDIO IN Port and one AUX Port for wired connection with other devices. • AUDIO IN: Main stereo audio input Two types of stereo audio cables are included in the package, 3.5mm 4-pole stereo audio cable and 3-pole stereo cable. If you need to use playback control over Bluetooth (AVRCP) for the stereo audio device with playback control such as iPhone, you may use the 3.5mm 4-pole stereo audio cable. • AUX: Auxiliary audio input You may use a 3.
6.2 Using with a headset 1. Turn on Bluetooth headsets that are already paired with the SM10. 2. Turn on audio device connected with SM10 and play the music. 3. Turn on the SM10. 4. The SM10 automatically connects to the paired Bluetooth headsets. You will then hear the music or other audio sound. 5. If you can’t hear any sound, press the Pairing Button of the SM10. The SM10 tries to connect the paired Bluetooth headset again. Note: 1.
English 6.3 Mute or un-mute AUX To mute or un-mute AUX, press and hold the Pairing Button for 2 seconds 6.4 Audio Boosting You can boost the audio input volume for both the AUDIO IN Port and AUX Port of the SM10 by double tapping the Pairing Button in the center of the SM10. This is especially helpful in case the audio device doesn't have enough volume output.
6.6 Fault Reset If the SM10 is not working properly or is in a faulty status for any reason, you may reset by pushing the small reset button at the back of the SM10 Main Unit. By using a paper clip or a pencil tip, lightly press and hold the reset button for 1 second. The SM10 will be switched off and automatically switched on again. Turn the SM10 back on to use it. However, this will not restore the SM10 to factory default settings.
7.
BATTERY INFORMATION The SM10 has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge the battery only with Sena approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard. Always try to keep the battery between 15°C and 25°C (59°F and 77°F).
MAINTENANCE AND CARE English The product should be treated with care and the following suggestions will help you protect your warranty coverage. 1. Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. 2. Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and wrap or melt certain plastics. 3. Do not store the device in cold areas.
DISPOSAL The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available.
CERTIFICATION AND SAFETY APPROVALS English FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: - This device may not cause harmful interference, and - T his device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -C onnect the equipment into an outlet on a circuit different from that to which the receiver is connected. -C onsult the dealer or an experienced radio/TV technician for help.
English CE Declaration of Conformity This product is CE marked according to the provisions of the R&TTE Directive (1999/5/EC). Hereby, Sena declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information please consult www.sena.com. Please note that this product uses radio frequency bands not harmonized within EU.
Bluetooth License The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Other trademarks and trade names are those of their respective owners The product is compliant with and adopts the Bluetooth® Specification 2.1+EDR and has successfully passed all interoperability tests that are specified in the Bluetooth® specification. However, interoperability between the device and other Bluetooth®-enabled products is not guaranteed.
SAFETY INFORMATION English Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and/or damage to property. Product Storage and Management • Keep the product free of dust. It may damage mechanical and electronic parts of the product. • Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the battery, and/or melt plastic parts of the product.
• To prevent condensation from forming, put your product inside a plastic bag and tightly seal it. Remove your product from the plastic bag after the temperature inside the bag is similar to the external temperature. • Do not clean the product with cleaning solvents, toxic chemicals, or strong detergents as this may damage the product. • Do not paint the product. Paint may obstruct moving parts or interfere with the normal operation of the product. • Do not drop or otherwise shock the product.
English • Keep product away from pets or small children. They may damage the product. • In any place where wireless communication is prohibited, such as hospitals or airplanes, turn off the power and refrain from using the product. In a place where wireless communication is prohibited, electromagnetic waves may cause hazards or accidents. • Do not use the product near hazardous explosives.
• The battery performance may be reduced over time with usage. • Make sure you turn off the product when it is not in use. The battery discharges even when your product is in standby mode. • Make sure you charge the battery pack enough before using your product. • When recharging the battery, make sure to use an approved charger provided by the manufacturer. Use of a nonapproved charger may cause fire, explosion, leakage, and other hazards may also reduce the life time or performance of the battery.
English • If you apply heat to the battery or throw it into fire, it may explode. • Do not use the product with a damaged battery. It may explode and/or cause accidents. • Never use a damaged charger. It may explode and/or cause accidents. • Battery life may vary depending on conditions, environmental factors, functions of the product in use, and devices used with it.
WAIVER AND GENERAL RELEASE By using the Product, you waive any legal rights including the right to sue. Please read the following carefully before using the device. If you do not accept all terms of this agreement, you should immediately return the product for a full refund. By using the Product, you agree to be bound to this agreement and forfeit the right to sue.
English publications, advertisements, announcements or similar notes that refer to using the Device while riding a Vehicle are solely intended to address its technical capabilities and should not be misconstrued as if encouraging users to operate the Device while actively involved in traffic.
Sena hereby notifies you that using this Device may also be in contravention to local, federal, state or national laws or regulations, and that any use of the Device is entirely at your sole risk and responsibility. 1.
English confirm that you are at least eighteen (18) years of age and that you have been advised of the risks associated with the use of the Device. You further confirm that you will not consume any alcohol that may affect your alertness or any mind-altering substance, and will not carry, use or consume these substances before or during the use of the Device. 4.
substantial rights by not returning the Device for a full refund (see refund option below). Two-Year Limited Warranty Sena Technologies, Inc. (“Sena”) warrants that this product (“Product”) shall conform to and perform in accordance with published technical specifications and the accompanying written materials, and shall be free of defects in materials and workmanship, for a period of two (2) year from the date of purchase by the first consumer purchaser of the Product.
English complementary equipment or software not furnished by Sena. Limited warranty service may be obtained by delivering the Product to Sena or to the international distributor it was purchased through and providing proof of purchase or receipt date. Customer agrees to insure the Product or assume the risk of loss or damage in transit, to prepay shipping charges to Sena, and to use the original shipping container or equivalent.
OF ANTICIPATED PROFITS OR BENEFITS RESULTING FROM, OR ARISING OUT OF, OR IN CONNECTION WITH THE USE OF FURNISHING OF EQUIPMENT, PARTS OR SERVICES HEREUNDER OR THE PERFORMANCE, USE OR INABILITY TO USE THE SAME, EVEN IF SENA OR ITS DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL SENA OR ITS DEALERS TOTAL LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT.
WARNING English Sena informs that using this device in public traffic may not be authorized by the law. Please check your local law and use this device only out of public traffic such as private properties or closed circuits. Sena denies any liability should you choose not to respect this warning.
1.1.2 www.sena.com User’s Guide for Firmware v1.