BLUETOOTH® HALF HELMET 1.0.
RIDE CONNECTED Blast your favorite tunes, talk over the intercom with your buddies, hear directions from your GPS and more, all through your Sena Cavalry Bluetooth Half Helmet. With built-in Bluetooth® capabilities, HD speakers and a microphone using Advanced Noise Control™, technology has never felt so minimal or freeing.
GETTING STARTED 1. This product comes with a Quick Start Guide, which is a basic version of the User’s Guide. A FULL VERSION OF THE USER’S GUIDE CAN BE DOWNLOADED AT SENA.COM/DOCUMENTS. 2. Update this product for free with the latest firmware to fully enjoy the new advanced features built into this product. Visit Sena. com/device-manager-download/ to see how to update your product. 3.
GETTING STARTED How to Use This Guide The legend and callouts are here to help you read the illustrations. New technology can be confusing, but we’ve created a simple way to perform actions using illustrations.
QUICK START GUIDE Helmet Structure Bluetooth Communication Module DC Power Charging & Firmware Upgrade Port Exterior Shell Chinstrap Retention D-Rings QUICK START GUIDE
QUICK START GUIDE Microphone Speakers (+) Button Increase Volume Track Forward Scan Radio Stations Speed Dial Fault Reset Button Blue & Red LED Lights (-) Button Decrease Volume Track Back FM Radio On/Off Center Button Answer/End Phone Call Reject an Incoming Phone Call Start/End Intercom Conversation Play/Pause Music Enter Intercom Pairing Mode Enter Voice Configuration Settings
QUICK START GUIDE Chinstrap Gently pull the padded V-straps outward and slide the helmet onto your head. Route the chinstrap under your chin, then thread it through both D-Rings. To fasten securely, thread chinstrap back through the D-Ring closest to your neck, and pull. Thread chinstrap through the D-Rings Chinstrap Note: Check the chinstrap’s position and tension regularly to ensure proper fit.
QUICK START GUIDE Ear Plates To amplify the sound from the speakers, you can use the ear plates. Slide in the included ear plates on both sides of the helmet. Make sure they are aligned with your ears.
QUICK START GUIDE Ear Pads To amplify the sound from the speakers and cut wind noise in high speeds, you can use the ear pads. Slide in the left and right ear pads on corresponding sides of the helmet. Then slide in each side of the chinstrap through the bands on the ear pads.
QUICK START GUIDE Slide in the chinstrap through the ear pad’s band Note: It is recommended that you install the ear pads at all times to enhance the sound quality of the helmet.
QUICK START GUIDE Checking the Battery Level There are two ways to check the battery levels, visually using the LED lights, and audibly. Instructions are for when powering the Bluetooth Module on. Visual Method Audible Method HOLD = VISUAL METHOD HIGH MED LOW HOLD = 1s 3s AUDIBLE METHOD “Battery level high/medium/low” = = = Bluetooth Pairing (Phone, MP3, GPS) Mobile Phone Pairing = Steps continued... HOLD “Phone pairing” 10s Alternating blue and red flashing CONFIG.
QUICK START GUIDE Mobile Phone Answer a Call Make Call with Voice Dialer TAP = 1x = ANSWER 3s VOICE DIAL End/Reject a Call = HOLD HOLD 2s END/ REJECT Music Controls Play/Pause = Next Track HOLD 1s “[Beep, Beep]” = HOLD 1s Previous Track = HOLD 1s
QUICK START GUIDE Intercom Pairing Up to three people can communicate via intercom with the Cavalry Bluetooth Half Helmet simply by pairing their headsets. Intercom Pairing Pairing with Intercom B A A and B = HOLD 5s B D C “Intercom pairing” A = or TAP 1x B Flashing blue LED = confirms intercoms LED STATUS are paired. Note: Repeat the following steps to pair with Intercom Friends C & D.
QUICK START GUIDE Two-Way Intercom Last-Come, First-Served A Start/End with Intercom Friend 1 B D Intercom Friend 1 YOU A C Intercom Friend 1 A YOU D Intercom Friend 1 1x Start/End with Intercom Friend 2 B C YOU TAP = Intercom Friend 2 C B Intercom Friend 2 TAP = 2x Start/End with Intercom Friend 3 B Intercom Friend 3 TAP = 3x Group Intercom Start Group Intercom = End Group Intercom TAP START GROUP INTERCOM HOLD 1s END GROUP INTERCOM “Group intercom” Alternating blue and
QUICK START GUIDE Radio FM Radio On Seek and Save Stations HOLD = 1s TAP = 2x = 2x SEEK FORWARD “[Beep, Beep]” FM Radio Off = SEEK BACKWARD HOLD 1s “[Beep, Beep]” = 3s “Preset (#)” HOLD = 1s TAP 1x CHOOSE PRESET # START SCANNING = TAP = 1x HOLD 1s SAVE TO PRESET # SAVE STATION = “Preset (#)” = STOP SCANNING HOLD ENTER PRESET MODE Scan and Save Stations = TAP HOLD 1s DELETE STATION HOLD 1s
QUICK START GUIDE Navigating Preset Stations = HOLD 1s NAVIGATE FORWARD Note: You can also use the Sena Device Manager or the Sena Smartphone App to save the preset stations. Configuration Menu Accessing the Configuration Menu = Navigating Between Menu Options HOLD = 10s CONFIG.
QUICK START GUIDE Sena Device Manager The Sena Device Manager allows you to upgrade the Bluetooth Communication Module’s firmware and configure its settings directly from your PC or Apple computer. Using this software, you can assign speed dial presets, FM radio station presets and more. For more information on downloading the Sena Device Manager, please visit Sena.com.
QUICK START GUIDE Troubleshooting Fault Reset Factory Reset = HOLD 10s = HOLD 1s “Configuration menu” = TAP 2x NAVIGATE BACKWARD 2X “Factory reset” = EXECUTE TAP 1x Note: Fault Reset will not restore the Bluetooth module to factory default settings.
QUICK REFERENCE TYPE OPERATION BUTTON COMMANDS HOLD Power on/off 1s TAP Basic Operations 1x Volume up/ Volume down TAP 1x Answer phone call End/reject phone call Mobile Phone HOLD 2s HOLD Voice dial 3s HOLD Speed dial 3s Play/Pause music Track forward TAP 1x HOLD 1s HOLD 1s Music Track back HOLD 1s QUICK REFERENCE
TYPE OPERATION BUTTON COMMANDS HOLD 5s Intercom pairing TAP 1x Start/end each intercom Intercom End all intercoms TAP 1x HOLD 1s TAP Start group intercom End group intercom FM radio on/off Select preset FM Radio 1x HOLD 1s HOLD 1s HOLD 1s TAP Seek stations forward 2x Seek stations backward 2x Scan up FM band/stop scanning Save preset while scanning TAP HOLD 1s TAP 1x