| SMH5-FM(SMH5) SMH5-FM(SMH5) SMH5-FM(SMH5) Bluetooth Headset & Intercom for Scooters and Motorcycles SENA www.senabluetooth.com 1 Users Guide v1.0.
| SMH5-FM(SMH5) INTRODUCTION Thank you for choosing the SENA SMH5-FM(SMH5), Bluetooth Stereo Headset and Intercom for motorcycles. With the SMH5, you can call hands-free on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders. The SMH5-FM(SMH5) is compliant with the Bluetooth Specification v3.
| SMH5-FM(SMH5) PACKAGE CONTENTS Headset Main Unit Phone Button ● Making and Answering a mobile phone call ● Entering into Mobile Phone Pairing Mode ● Entering into Bluetooth Audio Device Pairing Mode (MP3, GPS navigation) ● Entering into Voice Activated Phone Answering Setting Mode Jog Dial ● Start and End an Intercom Conversation ● Volume adjustment by rotating ● Play and Pause Bluetooth MP3 player ● Track-forward and Track-back by rotating while pressing the button ● Entering into Intercom Pairing Mode
| SMH5-FM(SMH5) Microphone Sponges Velcro Pads Hex Key (Allen Wrench) 4
| SMH5-FM(SMH5) POWERING ON/OFF AND CHARGING To power on and off the headset, you don’t need to press and hold any button for several seconds. Just short press the Jog Dial and the Phone Button simultaneously, and you will get quick on-and-off convenience. Powering On Press the Jog Dial and the Phone Button at the same time for about 1 second to power on. The blue LED turns on and you will hear ascending beeps.
| SMH5-FM(SMH5) PAIRING THE SMH5 WITH BLUETOOTH DEVICES Before using the SMH5-FM(SMH5) Bluetooth headset with any of Bluetooth devices for the first time, you need to do the pairing operation. It can be paired with Bluetooth mobile phones, Bluetooth audio devices such as MP3 or GPS, and with other SMH5-FM(SMH5) Bluetooth headsets.
| SMH5-FM(SMH5) PAIRING WITH SELECTIVE PROFILE: A2DP STEREOOR HANDSFREE If you have a MP3 stereo music phone such as a Smartphone, sometimes you may need to selectively use the SMH5FM(SMH5) for A2DP stereo music only or for mobile phone hands-free only. This instruction is for advanced users who want to pair the SMH5-FM(SMH5) to their Smartphones only with one selective profile: A2DP Stereo for music or HFP for phone call.
| SMH5-FM(SMH5) PAIRING WITH OTHER SMH5-FM(SMH5) HEADSETS FOR INTERCOM CONVERSATION The SMH5-FM(SMH5) can be paired with up to three other headsets for Bluetooth Intercom conversation. 1. Turn on the two headsets (A and B) that you would like to pair with each other. 2. Press and hold the Jog Dial of the headset A for 5 seconds until red LED starts to flash rapidly. 3. Press and hold the Jog Dial of the headset B for 5 seconds until red LED starts to flash rapidly. 4.
| SMH5-FM(SMH5) USING THE SMH5-FM(SMH5) Volume Adjustment You can easily adjust the volume by rotating the Jog Dial. You will hear a beep when the volume reaches maximum or minimum level. The volume is set and maintained separately at different levels for each function even when you turn off and on the headset. For example, once you set the mobile phone conversation volume, it is not changed even if you raise the volume when you hear Bluetooth MP3 music.
| SMH5-FM(SMH5) Enabling/Disabling Voice Activated Phone Answering (Factory Default: Disabled) If this feature is enabled, you can answer incoming calls by simply saying a word loudly enough. For example, when you hear a series of beeps by an incoming call, you can answer the phone by saying “Hello” or any other word loudly. The factory default setting is disabled. You can enable or disable this mode. If this mode is disabled, the only way to answer an incoming call is to tap the Phone Button. 1. 2. 3.
| SMH5-FM(SMH5) 1. Press and hold the Jog Dial for 8 seconds until the red LED turns on solidly. When you do this, after first 5 seconds you press the Jog Dial, you will see the headset enters into the Intercom Pairing sequence, but you have to keep pressing the Jog Dial for another 3 seconds until the LED turns to solid red. 4. To enable, tap the Jog Dial, then the blue LED flashes for 2 seconds and you will hear double beeps. 5.
| SMH5-FM(SMH5) Tip: The Jog Dial is for any kind of Intercom related function, and the Phone Button is for any functions of mobile phone. With this reason, as far as intercom function is concerned, the Jog Dial is used for a positive manner of action such as enabling, and the Phone Button is for a negative manner of action such as disabling. Vice versa for the mobile phone functions.
| SMH5-FM(SMH5) Function Priority The SMH5-FM(SMH5) operates in the following order of priority: (highest) Mobile phone, Intercom, Stereo music by audio cable, and (lowest) Bluetooth stereo music A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by intercom call, and intercom conversation is interrupted by incoming mobile phone call. Tip: Stereo Music by Bluetooth or 3.
| SMH5-FM(SMH5) Temporary Preset Phone Button 3 tab Fault Reset When the SMH5-FM(SMH5) is not working properly or is in faulty status with any reason, you may reset by pushing the pinhole reset button at the back of the headset main unit. Insert a paper clip into the reset pin-hole and press the reset button for a second with light pressure. The SMH5-FM(SMH5) will be switched off and you have to turn on and try to use again. However, this will not restore the headset to factory default settings.
| SMH5-FM(SMH5) FIRMWARE UPGRADE The SMH5 supports firmware upgrade function. Please visit SENA Bluetooth web site at www.SenaBluetooth.com to check the latest software downloads.
| SMH5-FM(SMH5) OPERATION QUICK REFERENCE Button Phone Button + Jog Dial Phone Button Description Duration LED Beep Power-on 1 sec Solid blue Ascending beeps Power-off Tapping Mobile phone pairing 5 sec MP3, GPS pairing 5 sec Solid red Blue &red alternatively flashing Blue &red alternatively flashing Voice activated phone answering setting 8 sec Descending beeps High-tone multiple beeps High-tone multiple beeps Mid-tone single beep red flashing Phone Button to enable Jog Dial to disable
| SMH5-FM(SMH5) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules.
| SMH5-FM(SMH5) -Modifier l’emplacement ou l’orientation de l’antenne de réception. -É loigner l’appareil du récepteur. -Brancher l’appareil sur une prise située sur un circuit différent de celui du récepteur. -Consulter le revendeur ou un technicien expérimenté pour obtenir de l’aide. É noncé FCC sur l’exposition aux radiations RF Cet équipement est conforme aux réglementations FCC d’exposition aux radiations définies pour un environnement non contrôlé.