pi Manual Charging Red LED: Charging Blue LED: Fully charged Power On/Off Power On : Press and hold the (+) Button and (-) Button for 1 second Power Off : Tap the (+) Button and (-) Button.
Volume Adjustment (+) Button - Increase the volume (-) Button - Decrease the volume Battery Check Phone, Music Pairing Initially Pairing the pi The headset will automatically enter the phone pairing mode when you initially turn on the Bluetooth system or in the following situation: • Rebooting after executing Factory Reset 1. Press and hold the (+) Button and (-) Button for 1 second. 2. Search for Bluetooth devices on your mobile phone.
Music Operation Play or pause music: Press the (+) Button for 1 second. Track back: Press the (-) Button for 2 seconds. Track forward: Press the (+) Button for 2 seconds. Mobile Phone Call Making and Answering Answering a call: Tap the (+) Button Ending a call: Press the (+) Button for 2 seconds. Rejecting a call: Press the (+) Button for 2 seconds. Voice dial: Press the (+) Button for 3 seconds. Intercom Intercom Pairing 1.
Setting Configuration Menu: Press the (-) Button for 5 seconds. Using the Sena Device Manager Connect the headset to your computer via a USB cable. Launch the Sena Device Manager and click DEVICE SETTING to configure the headset settings. Installing the Headset on your Helmet 1. Secure the headset to the chinstrap using the strap hooks on both sides. 2. Slide the headset as close to the helmet as possible. Note : The [R] and [L] makings are located on the back of the headset.
3. Hide the cable under the inner pad in the front of the helmet. 4. Adjust the headset upward or downward so that the speakers are facing your ears. Troubleshooting Factory Reset If you want to restore the headset to factory default settings, use the Factory Reset in the configuration menu. The headset automatically restores the default settings and turns off. Certification and Safety Approvals FCC Compliance Statement This device complies with part 15 of the FCC rules.
interference will not occur in a particular installation.
interférences nuisibles à la réception de la radio ou de la télévision (ce qu’il est possible de déterminer en mettant l’équipement hors tension, puis sous tension), l’utilisateur est invité à suivre une ou plusieurs des mesures suivantes pour corriger le problème des interférences en prenant l’une des mesures suivantes : -Modifier l’emplacement ou l’orientation de l’antenne de réception. -É loigner l’appareil du récepteur.