User Manual

ManualsBrandsSENA TECHNOLOGIES ManualsElectronicsSPIDER ST1

SPIDER ST1 Manual

Charging

Red LED: Charging

Blue LED: Fully charged

Power On/Off

Press and hold the Jog Dial and Phone Button for 1 second

Tap the Jog Dial and Phone Button.

Volume Adjustment

Increase/Decrease the volume : Rotate the Jog Dial clockwise or counterclockwise

Battery Check

Phone, Music Pairing

Initially Pairing the SPIDER ST1

Summary of content (6 pages)

PAGE 1
SPIDER ST1 Manual Charging Red LED: Charging Blue LED: Fully charged Power On/Off Press and hold the Jog Dial and Phone Button for 1 second Tap the Jog Dial and Phone Button.
PAGE 2
The headset will automatically enter the phone pairing mode when you initially turn on the headset or in the following situation: • Rebooting after executing Factory Reset 1. Press and hold the Jog Dial and Phone Button for 1 second. 2. Search for Bluetooth devices on your mobile phone. Select the SPIDER ST1 in the list of the devices detected on the mobile phone. 3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
PAGE 3
Stop scanning: Double tap the Phone Button Save presets while scanning : Save presets: Tap the Phone Button Radio Move to Preset Station Move to next preset: Press the Jog Dial for 1 second (1 → 2 → … → 10) Radio Seek Stations Seek up/down stations: Rotate while pressing the Jog Dial clockwise or counterclockwise. Setting Configuration Menu: Press the Jog Dial for 10 seconds. Using the Sena Device Manager Connect the headset to your computer via a USB cable.
PAGE 4
Certification and Safety Approvals FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules.
PAGE 5
protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère et utilise de l’énergie radio fréquence et, s’il n’est pas installé et utilisé conformément. aux instructions, il peut occasionner des interférences nuisibles au niveau des communications radios. Cependant, il n’existe aucune garantie que ces interférences ne se produiront pas dans une installation particulière.
PAGE 6
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement. IC RF Exposure Statement Cet équipement est conforme aux limites d'exposition aux radiations de la FCC définies pour un environnement non contrôlé. Les utilisateurs finaux doivent suivre les instructions d'utilisation spécifiques pour satisfaire à la conformité d'exposition RF.