Latitude S1 Manual
Charging Red LED: Charging Blue LED: Fully charged Power On/Off Power On : Press and hold the Jog Dial and Phone Button for 1 second Power Off : Tap the Jog Dial and Phone Button.
Phone, Music Pairing Initially Pairing the Latitude S1 The Bluetooth system will automatically enter the phone pairing mode when you initially turn on the Bluetooth system or in the following situation: • Rebooting after executing Factory Reset 1. Press and hold the Jog Dial and Phone Button for 1 second. 2. Search for Bluetooth devices on your mobile phone. Select the Latitude S1 in the list of the devices detected on the mobile phone. 3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
Setting Configuration Menu: Press the Jog Dial for 10 seconds. Troubleshooting Factory Reset If you want to restore the headset to factory default settings, Press and hold the Phone Button for 10 seconds and tap the Jog Dial. The headset automatically restores the default settings and turns off.
Certification and Safety Approvals FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules.
de classe B, conformément à la partie 15 des règles de la FCC. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère et utilise de l’énergie radio fréquence et, s’il n’est pas installé et utilisé conformément. aux instructions, il peut occasionner des interférences nuisibles au niveau des communications radios.
