5S Manual (SP77) Charging Charging : Fully charged : Power On/Off Power On : Press and hold the Jog Dial and Phone Button for 1 second -> Power Off : Tap the Jog Dial and Phone Button.
High : Phone, Music Pairing 1. Press and hold the phone Button for 5 seconds. 2. Search for Bluetooth devices on your mobile phone. Select the Sena 5S in the list of the devices detected on the mobile phone. 3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. Music Operation Play or pause music: Press and hold the Jog Dial for 1 second. Track forward/ back: Rotate while pressing the Jog Dial clockwise or counterclockwise.
Intercom Intercom Pairing 1. Press and hold the Jog Dial of two headsets for 5 seconds. 2. Simply tap the Jog Dial of any one of the two headsets. Intercom Start/End : Tap the Jog Dial. Radio On/Off Turn on the FM radio: Press the Phone Button for 1 second.
Turn off the FM radio: Press the Phone Button for 1 second. Radio Scan Up FM Band Start scanning: Double tap the Phone Button Stop scanning: Double tap the Phone Button Save presets while scanning : Save presets: Tap the Phone Button Radio Move to Preset Station Move to next preset: Press the Jog Dial for 1 second (1 → 2 → … → 10) Radio Seek Stations Seek up/down stations: Rotate while pressing the Jog Dial clockwise or counterclockwise. Setting Configuration Menu: Press the Jog Dial for 10 seconds.
Troubleshooting Factory Reset If you want to restore the headset to factory default settings, use the Factory Reset in the configuration menu. The headset automatically restores the default settings and turns off. Certification and Safety Approvals FCC Compliance Statement This device complies with part 15 of the FCC rules.
FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. When equipped, the distance between antenna and one’s head surface is 35mm.
Cet appareil est conforme à l'exigence d'exposition aux RF. Lorsque équipé, la distance entre l’antenne et la surface de la tête est de 35mm. L’EST étant commercialisé sans casque, il doit donc rester à une distance de 35mm de la surface de la tête. Précautions FCC Tout changement ou modification non expressément approuvé par la partie chargée de la mise en conformité peut annuler le droit de l’utilisateur à utiliser l’équipement.