User's Manual

P/N MAN-0698/01.01P/N MAN-0698/01.01P/N MAN-0698/01.01P/N MAN-0698/01.01
In the vehicular configuration: during normal operation the
knob has the volume control function, turn it clockwise to
turn up the volume (16 levels) of the audio output of the
loudspeaker/earphone.
Turn the knob counterclockwise to decrease the volume.
If the knob is kept pressed until the alternate symbols
S
and appear on the display it goes to group-channel
selection function. Once in this modality turn the knob to
choose among the available groups and select the group-
channel by pressing the knob. Once pressed the knob you
go back to volume control function. If, in group-channel
selection modality, no operation on the knob is performed for
a pre-defined time interval, the knob automatically changeovers
to volume control function. Each changeover of knob function
is signalled to the operator by means of a confirmation beep.
In the Motorcycle configuration: the triple pushbutton allows
the same operativity of the knob.
(“+” to increase the volume/scroll up the groups;
“-” to decrease the volume/scroll down the groups;
“•” to switch from volume control to group selection/OK).
Lit while the radio is receiving.
Lit while the radio is transmitting; blinking while the tran-
smission is inhibited (only TETRA).
When a symbol, or a writing, is present on the display near
the key, by pressing the key you select the function
associated to the relative symbol/writing.
To scroll up/down the menu items, select the option
and escape.
The off hook green key is used to accept/make (after
having typed in the address) an individual full duplex call
and if pressed in idle status accesses the calls list.
The on hook red key is used to end the connection. It is
also used to switch on/off the radio if kept pressed for a
few seconds.
Alphanumeric keypad for dialling numbers and/or strings.
It is made up of 12 keys (10 digits plus and ).
Clear/escape key.
Only for TETRA: if a group is selected, by pressing the
yellow key the writing "Dispatcher" on the display appears:
now, by pressing PTT (if the network allows this function)
the first available dispatcher of the selected group is called
(not the group). By pressing again the yellow key the name
of the selected group appears on the display and by
pressing PTT the selected group is called. If no group is
selected the yellow key allows to make an (half duplex)
individual/group call by pressing PTT (after having typed
in the address) even if the PTT default modality is set (by
PRP) for group/(half duplex) individual call.
The key
allows to switch the audio from the external
loudspeakers to handset accessory and viceversa. (Active
only if the external loudspeaker and the handset are
connected to the radio).
It lets the user send an emergency alarm.
To be connected to audio accessories.
To be connected to USB-A mass storage device (for FPG3
software download).
Push-To-Talk button, press it to talk during half duplex
conversation.
If pressed (in Idle status when a group-channel is se-
lected, or after having typed in a group-channel address)
it sends the call to the group-channel. See also the yellow
key function description.
Signal level (TMO and GTW mode)
Network, searching network (flashing)
Direct Mode with Gateway equipment presence detected
Fallback Mode
Direct Mode
Repeater Mode (Repeater only)
Gateway Mode (Gateway only)
Direct Mode with Repeater equipment presence detected
Packet Data Context
Packet Data Channel
E2E Crypto Enable
Custom E2EE Error
Custom E2EE Enable
No read Messages, Full queue with at least one message not
read (flashing)
Full Queue, each message is read
Active Data Call
Bluetooth Activated
Earphone Speech Call
Active Speech Call
Keypad Volume Off
Keypad Locked
Group scanning Enabled
Group Attach Failure
SDS and voice communication monitoring (Repeater only)
Voice communication monitoring (Repeater and Gateway only)
SDS monitoring (Repeater only)
Helmet detected
Rotary Knob Enabled
Tx Active
UHF Network Channel
UHF Simplex Channel
Loudspeaker Audio Output
Earphone Audio Output
Menu structure
© 2010 SELEX Communications S.p.A. - All rights reserved.
SELEX Communications S.p.A. reserves the right to change specifications, performance or features relevant to the product described
without notice. This is an unpublished work the copyright in which vests in SELEX Communications S.p.A. The information contained
herein is confidential and the property of SELEX Communications S.p.A. and is supplied without liability for errors or omissions. No
part may be reproduced, disclosed or used except as authorised by contract or other written permission.
TETRA - Mobile Radio Terminal
Quick Reference Guide
Controls, indicators and connectors
VS3000-FPG3
Displayed symbols
SELEX Communications S.p.A. A Finmeccanica Company
Via Pieragostini, 80, 16151 - Genova, Italy
D
R
G
M
M
Volume
Controller/
Group -
channel
Selector
Green LED
Red LED
Function Keys
Menu
navigation
keys
Off hook key
On hook key
Alphanumeric
keypad
Clear key
Yellow key
Switch audio
key
Emergency key
12 pins
connector
USB connector
(only vehicular)
PTT (Not
located on the
FPG3 front
panel)
Menu

NOTES:
- Some menus can be or not available according to the configuration of
the radio terminal.
- Choosing some options of WPS menus can cause the ending of active
group calls.
E2EE Status (enable/
disable E2EE)
E2EE Key
In Box (TMO, DMO, REP, FM)
Out Box (TMO, DMO, FM)
Text Message (TMO, DMO, FM)
Send Status (TMO, DMO, FM)
Char Size (TMO, DMO)
Messages (TMO, DMO, REP,
FM)
Change Mode (TMO, DMO,
REP, GTW, FM)
Encryption (TMO, and DMO only)
Phone Lists
Settings
Monitor (to check radio coverage,
FM only)
GPS
Information
Help
Phone Book
(user defined TMO and
DMO only)
Home TETRA
(pre-configured phone
book TMO and DMO only
Non TETRA
(pre-configured phone
book, TMO only)
Group
(To see the configured groups, FM only)
Group Management
(TMO, DMO and GTW)
Calls (TMO and DMO only)
Delivery Options
(to select the kind of messages delivery
report, TMO and DMO)
Tx Inhibit
(to disable/enable the transmission, TMO
and DMO only)
Preferences
Bluetooth (TMO only)
Speech Monitor
(to enable/disable the functionality; REP and
GTW only)
SDS Monitor
(to enable/disable the functionality; REP
only)
Auxiliary Microphone
(to configure the kind of auxiliary microphone,
TMO, DMO and FM)
Full Duplex
(to set the type of full duplex: real or pseudo
full duplex, TMO only)
Group Scanning
(to enable/disable it, TMO and DMO only)
WPS Selection (TMO, DMO and GTW)
WPS Update (TMO, DMO and GTW)
WPS Reconfigure (TMO, DMO and GTW)
Active WPS
(to change the configuration of
the active WPS)
Extra WPS
(to move the groups assigned
by DGNA in the current WPS)
WPS Data
(to modify the current WPS parameters)
Group Data
(to modify the groups parameters)
Late Entry
(to enable/disable the function)
Communication
(with/without ack, DMO only)
Send TPNI
(enable/disable, DMO only)
Group Call
(to select the type of group call, TMO only)
Dial Mode
(to select the dialling modality)
Call Identification
(to choose if send or hide its own radio identifier,
TMO only)
Gateway <0>, <9>
(to select the default gateway from the gateway
list, TMO only)
Pin
(to change/enable/disable it)
Language
Sounds
(to disable and to control the sounds
volume)
Display
(to configure display settings)
Presence Signalling
(to enable/disable the presence signal
transmission; REP only)
Hands Free
Lemo
Key Access
(direct access keys are shown)
Dialling
(dialling digits are shown; TMO and
DMO only)
Supplementary String
(supplementary strings are shown;
TMO and DMO only)
Symbols
(symbols meaning is shown)
Activation/Deactivation
Devices
Active Connections
Offered Services
Find New
Devices List
Backlight
(to change the display backlight modality)
Zoom
(to zoom in/zoom out the display)
& FM
Before using the equipment, read all the
instructions contained in the manual and, with
special care, those relative to safety.
Two versions are available:
• VS3000-FPG3 Vehicular configuration
• VS3000-FPG3 Motorcycle configuration
See the Safety Recommendation guide for FCC Approval.