User's Manual

ManualsBrandsSelex ES ManualsElectronicsPUMA T3 Plus/806-870

P/N MAN-0696/01.01 P/N MAN-0696/01.01 P/N MAN-0696/01.01P/N MAN-0696/01.01

Group Mng (only TETRA)

(group management)

Calls (only TETRA)

Delivery Options (only

TETRA)

(to select the kind of mes-

sages delivery report)

Tx Inhibit (only TETRA)

(to disable/enable the

transmission)

Group (only FM)

(to select the active group/

channel)

Dead Man

(to enable/disable the

relative functionality)

Preferences

Bluetooth

Accessories

SELEX Communications S.p.A. reserves the right to change specifications, performance or features relevant to the product described

without notice. This is an unpublished work the copyright in which vests in SELEX Communications S.p.A. The information contained

herein is confidential and the property of SELEX Communications S.p.A. and is supplied without liability for errors or omissions. No

part may be reproduced, disclosed or used except as authorised by contract or other written permission.

Handportable radio

Quick reference guide

SELEX Communications S.p.A. A Finmeccanica Company

Via Pieragostini, 80, 16151 - Genova, Italy

Before using the equipment, read all the

instructions contained in the present guide and,

with special care, those relative to safety.

WARNING

Menu structure

 NOTE:

— Some menus can be or not available according to the configuration

of the radio terminal.

— Choosing some options of WPS menus can cause the ending of

active group calls.

E2EE Status

(enable/disable E2EE)

Phone Book (only TETRA)

(user defined)

Home TETRA (only TETRA)

(pre-configured phone

book)

Non TETRA (only TETRA)

(pre-configured phone

book, TMO only)

Group Scanning

(to enable/disable it)

WPS Selection

WPS Update

WPS Reconfigure

Active WPS

(to change the configura-

tion of the active WPS)

Extra WPS

(to move the groups

assigned by DGNA in the

current WPS)

Key Access

(direct access keys are shown)

Dialling (only TETRA)

(dialling digits are shown)

Supplementary String (only

TETRA)

(supplementary strings are

shown)

Symbols

(symbols meaning is shown)

Activation/Deactivation

Devices

Active Connection

Offered Services

Find New

Devices List

Displayed symbols

Signal level (TMO channel)

Network (search if flashing)

Direct Mode

Direct Mode with DM-GATEWAY equipment presence

detected

Direct Mode with DM-REP equipment presence detected

E2E Crypto enabled

Presence of not read messages in the In-Box. If the

symbol is blinking the queue is full, and there is at least

one message not read

Full Queue, each message is read

Active Data Call

Fallback mode

Earphone speech Call

Speech connection active, loudspeaker mode

Keypad Volume OFF

Keypad locked

Group Scanning enabled

Group Attach Failure

Group selector enabled, displayed alternatively to

Battery level indication

Packet Data Context

Packet Data Channel

Headset detected

Bluetooth activated (*)

Handset detected

GPS External Device detected

Car kit detected

UHF Simplex channel

UHF Network channel

Custom E2EE enabled

Custom E2EE error

VOX enabled

Transmission active

Main controls and indicators

During normal operation the knob has the volume control

function, turn it clockwise to turn up the volume of the audio

output of the loudspeaker/earphone.

Turn the knob counterclockwise to decrease the volume.

If the knob is kept pressed until the alternate symbols

and

appear on the display it goes to group-channel selection

function. Once in this modality turn the knob to choose

among the available groups and select the group-channel by

pressing the knob. Once pressed the knob you go back to

volume control function. If, in group-channel selection modality,

no operation on the knob is performed for a pre-defined time

interval, the knob automatically changeovers to volume

control function.

Keep pressed the emergency key for at least 2 seconds to

send an emergency alarm, when the radio is on. When the

radio is off pressing the emergency key will turn on the radio.

Right navigation key: it's usually related to the BACK/CLEAR

option. When the radio is in idle status it allows the access

to send status menu; during calls using this key it is possible

to send DTMF tones (only TETRA).

Up/down navigation key. In idle status allows to access the

phone lists menu. It changes conversation mode (from

loudspeaker to earphone and vice versa) during calls.

Left navigation key, for menu options selection. In idle status

and during calls it allows the access to the main menu.

Keep pressed for a few seconds to switch on/off the radio. If

pressed during communication it interrrupts the connection.

Speaker used for Loudspeaker conversation mode.

Off hook key, to accept/make (after having typed in the

address) an individual full duplex call; if pressed in idle status

it allows to access the list of the last calls (made/received).

Push-To-Talk button, press it to talk during half-duplex

conversation. If pressed (in idle status when a group is

selected, or after having typed in a group address) it sends

a call to the selected group/channel.

If the network allows this function, pressing PTT(1) in idle

status when a group is selected the first available dispatcher

of the selected group is called (not the group). Otherwise,

after having typed in the address, press PTT(1) to make the

half duplex individual call.

It is lit while the radio is transmitting; blinking in Tx Inhibit

mode (only TETRA).

It is lit while the radio is receiving.

Small speaker used for earphone conversation mode.

Group -

channel

Selector /

Volume

Controller

Emergency

key

Loudspeaker

PTT

PTT(1)

Red Led

Green Led

Earphone

(to change/enable/disable it)

Talk (only TETRA)

(to select the default conversa-

tion mode loudspeaker/ear-

phone for direct incoming calls)

Language

Sounds

(to disable and to control the

sounds volume)

Display

 NOTE:

For what concerns technical characteristics, reference standard,

maintenance and troubleshooting, refer to the relevant technical

handbook.

& FM

PUMA T3 PLUS

Messages

Change Mode

(TMO/DMO/FM)

Encryption

(only TETRA)

Phone Lists

Settings

Monitor

(to check radio coverage,

only FM)

GPS

Information

Help

Late Entry

(to enable/disable the function)

Communication

(with/without ACK, DMO only)

Send TPNI

(enable/disable, DMO only)

Group Call

(to select the type of group

call, TMO only)

Dial Mode

(to select the dialling modality)

Call Identification

(to choose if send or hide its

own radio identifier, TMO only)

Gateway

(to select the default gateway

from the gateway list, TMO

only)

Backlight

(to change the display backlight modality)

LCD Contrast

(to change the display contrast)

Wallpaper

(to change the display background image)

Colour

(to change by means of various sub-menus the colour of

the background and of the text of various display contexts)

Black & White

(to set the display in black and white mode)

Zoom

(to zoom in/zoom out the display)

Screensaver

(to change the display screensaver)

Logo

(to change the welcome display image)

WPS Data

(to modify the current

WPS parameters)

Group Data

(to modify the groups

parameters)

In Box

Out Box

Text Message

Send Status

Char Size

See the Safety Recommendations guide for FCC Approval