Product Manual

ManualsBrandsSekisui Diagnostics ManualsRapid TestsOsom® Ifob Control Set - 1/bx

ATTACH COLLECTION

SHEET TO TOILET BOWL:

• Take Collection Paper

out of the envelope.

• Lift toilet seat.

• Peel off cover strip from the

tape on each end of the

paper.

• Place collection sheet

across the toilet bowl.

Allowing sheet to

sag slightly.

• Secure the

paper onto

the side first

by placing adhesive tabs

on the sides of the toliet rim,

then secure the other side.

• Lower the toilet seat.

OBTAIN STOOL SAMPLE

• With the stool still on the

Collection Paper, randomly

poke the spiral end of the

Sampler in at least 6 different

sites of the stool. DO NOT

SCOOP.

• Insert the Sampler back into

the Stool Collection Tube

and firmly tighten screw cap.

• Shake the tube well to mix

the stool.

STOOL SAMPLE COLLECTION

• Unscrew the Sampler cap

from the Stool Collection

Tube.

• Do not spill or pour out the

liquid.

osom

iFOB Test

P A T I E N T S T O O L C O L L E C T I O N I N S T R U C T I O N S

YOUR PATIENT STOOL COLLECTION

PACK SHOULD CONTAIN:

• Stool Collection Tube with

Buffer

• 1 Collection Paper

• 1 Plastic Bag with absorbant

Pad

• 1 Return Mailing Envelope

• 1 Instructions for collecting

sample

WHEN YOU ARE READY TO HAVE

A BOWEL MOVEMENT, LABEL THE

STOOL COLLECTION TUBE

AS SHOWN BELOW:

• Using a ballpoint pen, write

your name and date of

stool collection on tube

label.

MAKE BOWEL MOVEMENT ONTO

COLLECTION SHEET:

• DO NOT allow collection

paper or feces to come in

contact with toilet water or

urine.

• The sample should not be

tested if it becomes wet or

contaminated.

CAUTION: If sample becomes contaminated with urine

or toilet water, DO NOT continue. If this happens, a new

sample will need to be collected. Place a clean

collection paper on the toilet bowel, then collect new

feces sample for testing.

S I D E

READ INSTRUCTIONS THOROUGHLY

BEFORE BEGINNING TEST

Stool Collection

Tube

Spiral End

iFOBT

Stool Collection Tube

P-L913

Sekisui Diagnostics, LLC.

6659 Top Gun Street

San Diego, CA 92121 USA

CONTENT OF KIT

Collection Paper

Stool Collection Tube

With Buffer

Plastic bag with absorbent pad

Mailing Envelope

Summary of content (2 pages)

PAGE 1
osom ® S I D E A iFOB Test PA T I E N T S T O O L C O L L E C T I O N I N S T R U C T I O N S READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING TEST YOUR PATIENT STOOL COLLECTION PACK SHOULD CONTAIN: • Stool Collection Tube with Buffer • 1 Collection Paper • 1 Plastic Bag with absorbant Pad • 1 Return Mailing Envelope • 1 Instructions for collecting sample CONTENT OF KIT Collection Paper Plastic bag with absorbent pad Stool Collection Tube With Buffer 1 Mailing Envelope WHEN YOU ARE READY TO HAVE A
PAGE 2
osom ® S I D E B iFOB Test PA T I E N T S T O O L C O L L E C T I O N I N S T R U C T I O N S 6 7 8 MAILING FLUSH TOILET RETURN THE SAMPLE • Place Stool collection tube in plastic bag and seal. • Place plastic bag in mailing envelope. • Peel tape from envelope flap • Fold flap on prefold line and press firmly. • Write your return address and the name and address of the doctor/lab who gave you the stool collection pack in the space provided on the Return Mailing Envelope.