R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R Rev. B FRONT.FM 7/3/03 A5 size Where to Find Information Setup This guide will help you set up and begin using your printer. It includes information on setting up your printer and installing the printer software. Photo Print Software Setup This guide provides information on installing EPSON PhotoQuicker, EPSON PhotoStarter, EPSON CardMonitor, EPSON PRINT Image Framer Tool and PIF DESIGNER.
L R4CC820 short.bk Rev. B FRONT.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name ® Color Inkjet Printer All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson printer.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk FRONT.FM 7/3/03 R Rev. B A5 size DPOF is a trademark of CANON INC., Eastman Kodak Company, Fuji Photo Film Co., Ltd. and Matsushita Electric Industrial Co., Ltd. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Seiko Epson Corporation is under license. Zip® is a registered trademark of Iomega Corporation. SD is a trademark.
L R4CC820 short.bk FRONT.FM 7/3/03 4 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk SHORT.TOC 7/3/03 R Rev. B A5 size Contents Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Warnings, Cautions, and Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Printer Parts and Control Panel Functions . . . . . . . . . 15 Printer Parts . . . . . . . . . . . . . . . . . . . . . . . . .
L R4CC820 short.bk SHORT.TOC 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Checking the Print Head Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning the Print Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aligning the Print Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transporting the Printer . . .
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk R Rev. B SAFE.FM 7/3/03 A5 size Safety Instructions Important Safety Instructions Read all of the instructions in this section before using your printer. Also, be sure to follow all warnings and instructions marked on the printer. When setting up your printer Observe the following when setting up the printer: ❏ Do not block or cover the vents and openings in the printer.
L R4CC820 short.bk SAFE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name ❏ Do not use a damaged or frayed power cord. ❏ If you use an extension cord with the printer, make sure that the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure that the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk R Rev. B SAFE.FM 7/3/03 A5 size ❏ Leave enough space in front of the printer for the paper to be fully ejected. ❏ Avoid places subject to rapid changes in temperature and humidity. Also, keep the printer away from direct sunlight, strong light, or heat sources. ❏ Avoid places subject to dust, shocks, or vibrations. ❏ Leave enough room around the printer to allow for sufficient ventilation.
L R4CC820 short.bk SAFE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name ❏ Leave the ink cartridges installed. Removing the cartridges can dehydrate the print head and may prevent the printer from printing. When using a memory card ❏ Do not remove the memory card or turn off the printer while the computer and the memory card are communicating (when any one of the memory card lights is flashing.). ❏ The methods for using memory cards vary according to card type.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B SAFE.FM 7/3/03 A5 size ❏ Do not remove the Preview Monitor slot cover unless you are using the optional Preview Monitor. When using the optional Bluetooth Photo Print Adapter Refer to Bluetooth Photo Print Adapter for the safety instructions when using the Bluetooth Adapter. When handling the ink cartridges Observe the following when handling the ink cartridges: ❏ Keep ink cartridges out of the reach of children.
L R4CC820 short.bk SAFE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name ❏ Do not dismantle the ink cartridges or try to refill them. This could damage the print head. ❏ After bringing an ink cartridge inside from a cold storage site, allow it to warm up at room temperature for at least three hours before using it. ❏ Store ink cartridges in a cool, dark place. ❏ Do not touch the green IC chip on the back of the cartridge.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B SAFE.FM 7/3/03 A5 size Warnings, Cautions, and Notes w c Warnings must be followed carefully to avoid bodily injury. Cautions must be observed to avoid damage to your equipment. Notes contain important information and useful tips on the operation of your printer.
L R4CC820 short.bk SAFE.FM 7/3/03 Rev. B A5 size 14 Proof Sign-off: M.Koike CRE Nakano M.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Rev. B PARTS.
L R4CC820 short.bk PARTS.FM 7/3/03 Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Rev.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B PARTS.
L R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Rev. B PARTS.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B PARTS.FM 7/3/03 A5 size Buttons 1. LCD panel: Shows the items and settings you change with the buttons on the control panel. 2. Direct Save button: Store the contents of memory card in an external storage device. 3. Custom buttons: Store the current settings on the LCD panel when held down for more than two seconds. Load the stored settings when pressed. 4.
L R4CC820 short.bk Rev. B PARTS.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Button Function P Turns the printer on and off. power Displays instructions to resolve errors, or cleans the following errors: ( maintenance No ink No ink cartridge/abnormality No paper (cut sheet only) Paper jam Multi-page feed Starts the Ink Cartridge Replacement utility. Displays the Advanced Settings menu when the ( maintenance light is off and the button is pressed.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B DBASE.FM 7/3/03 A5 size Direct Printing Basics Introduction This section provides information on how to print directly from a memory card using settings on the LCD panel and without the use of a computer. The instructions below provide an example of how to make settings to print a selected photo directry from a memory card.
L R4CC820 short.bk Rev. B DBASE.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name 4. Fan a stack of plain paper, then tap it on a flat surface to even the edges. 5. Load the paper with the printable side up so it is against the right edge guide, and slide it into the sheet feeder. Then slide the left edge guide against the left edge of the paper. Make sure that the paper stack is loaded under the tabs inside the edge guides.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B DBASE.FM 7/3/03 EPSON Photo Paper Up to 20 sheets of Photo Paper. One sheet at a time for 200 × 300 mm Photo Paper. EPSON Matte Paper-Heavyweight Up to 20 sheets. EPSON Premium Glossy Photo Paper One sheet at a time. EPSON Premium Semigloss Photo Paper One sheet at a time. EPSON ColorLife Photo Paper One sheet at a time. EPSON Iron-On Cool Peel Transfer Paper One sheet at a time.
L R4CC820 short.bk Rev. B DBASE.FM 7/3/03 A5 size c Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Caution: The methods for using memory cards vary according to card type. Be sure to refer to the documentation packaged with your memory card for details. Note: See “Memory card data format” on page 24 for the specifications of memory cards that can be used with the printer. Memory card data format You can use image files that meet the following requirements. Digital camera DCF version 1.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name DBASE.FM 7/3/03 Rev. B A5 size Inserting memory cards Turn the printer on, open the memory slot cover, then insert a memory card as shown in the illustration. When the memory card is inserted correctry, the memory card light corresponding to the card comes on.
L R4CC820 short.bk Rev. B DBASE.FM 7/3/03 A5 size c Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Caution: ❏ Insert a memory card so that the top of the card faces the right side, as shown in the illustration. ❏ Loading a memory card in ways other than those shown here may damage the printer, memory card, or both. ❏ Use only one type of memory card at a time. Eject the loaded memory card before inserting another kind of memory card.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk DBASE.FM 7/3/03 Rev. B A5 size 1. Make sure that Basic Mode is selected. Note: When Advanced Mode is selected, press the Basic/Advanced mode switch button, then press the OK button to switch to Basic Mode. 2. Make sure Select Photo is highlighted, then press the OK button to open the menu. 3. Press the d button to select Index, then press the OK button. 4. Make sure that 1 each is indicated as the Copies setting. 5.
L R4CC820 short.bk DBASE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Single photo print The example here is to print a single photo on the 10 × 15 cm size of Premium Grossy Photo Paper with Borderless and normal print quality. Index Photo Number 1. From the index, find the number of the photo that you want to print. The number is printed under the photo. 2. Press the u or d button to select Select Photo, then press the OK button. 3.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B DBASE.FM 7/3/03 A5 size 4. Select Copies, press the OK button to open the Copies counter, select the number you want to print, then press the OK button. 5. Press the Print button to print the photo. Print all photographs on the memory card All: Print all photographs on the memory card. 1. Select All as the Select Photo. 2.
L R4CC820 short.bk DBASE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name 2. Press the u or d button to select the photo number you want to print, then press the OK button. 3. Press the u or d button to select the number of copies you want to print, then press OK button. You can choose up to 10 copies. 4. Repeat steps 2 through 3 to register other photos. Note: To reset the number of copies, select the photo and press the OK button.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk DBASE.FM 7/3/03 Rev. B A5 size 6. When the numbers of all the photos you want to print have been registered, press the Print button to print the selected photographs. Print the DPOF data This printer conforms to DPOF (Digital Print Order Format) version 1.10. DPOF lets you set the photo numbers and the number of copies for photos on the digital camera before you print.
L R4CC820 short.bk DBASE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name 2. Press the u or d button to select the number of the first photo you want to print From:, then the number of the last photo you want to print To:, then press the OK button. 3. Select the number of Copies, then press the Print button to print the selected photographs. Print P.I.F. Index Using P.I.F.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B DBASE.FM 7/3/03 A5 size Loading a CD/DVD 1. Make sure that the printer is on. 2. Open the paper support, then slide out the extension. 3. Open the output tray, then open the print cover. 4. Open the CD/DVD guide. The “Switching to CD/DVD print mode” message appears when you open the CD/DVD guide, and the print settings are automatically set to those for printing onto CD/DVDs.
L R4CC820 short.bk DBASE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Selecting the Layout 1. Make sure that Layout is selected in the LCD panel settings, then press the OK button. 2. Press the d button to select the desired layout, then press the OK button. You can select the following layout options when printing on a CD/DVD. One photo will be printed on the CD/DVD, centered on the hole in the middle of the disc.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk DBASE.FM 7/3/03 Rev. B A5 size 2. Press the d button to select the desired photo, then press the OK button. 3. Press the u button to specify the number of prints for each photo, if you selected the 4-photo or 12-photo option for the Layout setting. Note: ❏ To select more than one photo, repeat steps 2 and 3 to select other photos and the number of times to print them.
L R4CC820 short.bk DBASE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Note: ❏ We recommend that you print a test of the layout on the dummy CD/DVD, usually included in the pack of CD/DVDs, before printing on a real CD/DVD. ❏ If necessary, you can adjust the print position. See “Adjusting the Print Position” on page 36 for details.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk DBASE.FM 7/3/03 Rev. B A5 size 3. Press the u or d button to select the direction and amount to move the image, then press the OK button. 4. To move the image left or right; press the d button to select CD/DVD Print Position Adjustment H and press the OK button. 5. Press the u or d button to select the direction and amount to move the image, then press the OK button. 6.
L R4CC820 short.bk DBASE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Adjusting the Print Density Follow the steps below to adjust the amount of ink used when printing photos on a CD/DVD. This adjusts the depth of color in the printed image. 1. Select Color Density and press the OK button. 2. Press the d button to select the desired color density and press the OK button. Cancelling printing To stop printing in progress, press the Stop button.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Rev. B DVARY.FM 7/3/03 A5 size Various Setting Advanced Printing Main settings 1 2 3 4 5 1. Select Photo On this menu, you can select how to print data stored on a memory card. Range Print a range of Photographs on the memory card. Individual Print selected photographs from the memory card. All Print all photographs on the memory card. Index Print an index of all photographs on the memory card.
L R4CC820 short.bk Rev. B DVARY.FM 7/3/03 A5 size P.I.F. Index Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Print an index of the PRINT Image Framer frames stored in the memory card. 2. Copies Select the number of copies you want to print. 3. Paper Type On this menu, the paper type can be selected. Glossy Print on EPSON Premium Glossy Photo Paper or EPSON Premium Semigloss Photo Paper. Photo Print on EPSON Photo Paper. Matte Print on EPSON Matte Paper Heavyweight.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Rev. B DVARY.FM 7/3/03 A5 size 5. Layout On this menu, the print layout can be specified. Borderless Prints without margins. Portrait layout. Single Prints with 3-mm margins on all sides. Portrait layout. Upper half Prints in the upper half without a border. Double Prints two images (landscape) on one page. Quarter Prints four images (portrait) on one page. Octet Prints eight images (landscape) on one page.
L R4CC820 short.bk DVARY.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name ❏ Print quality may decline in the top and bottom areas of the printout, or the area may be smeared when printing. ❏ Before printing large jobs, print a single sheet to confirm quality. More Options Photo Number When All, Range or Individual is selected as the Select Photo, this setting allows you to specify the number of the photo that you want to enhance or correct using the More Options.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name DVARY.FM 7/3/03 Rev. B A5 size The base point can be selected from nine options: Upper Left, Center Left, Lower Left, Upper Center, Center, Lower Center, Upper Right, Center Right, and Lower Right. You can select either 1.2 or 1.5 times magnification. Example. Center 1.5× Note: ❏ It is possible to check the area to be trimmed by viewing the yellow frame in the optional Preview Monitor.
L R4CC820 short.bk Rev. B DVARY.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Automatic Correction This printer is able to correct the color of printouts automatically. There are two kinds of correction available. By default, the setting is P.I.M. For printing with PRINT Image Matching, see “Exif Print and PRINT Image Matching” on page 49. P.I.M. (PRINT Image Matching) Print with the PRINT Image Matching function.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk DVARY.FM 7/3/03 Rev. B A5 size Brightness This setting allows you to adjust the brightness of your printouts. The default setting is Standard. Saturation This setting allows you to adjust the vividness of your printouts. Then default setting is Standard. Sharpness This setting allows you to adjust the sharpness of your printouts. The default setting is Standard.
L R4CC820 short.bk Rev. B DVARY.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Time This setting is to print the time information contained in your photo data. The default setting is None. The following examples show the format options for setting the time. None Does not print the time.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name DVARY.FM 7/3/03 Rev. B A5 size Fit to Frame This setting automatically trims the parts of an image that extend beyond the margins of the selected print size. Either the top and bottom areas or the left and right areas of the image will be trimmed, depending on the aspect ratio of the original photo and the selected print size. The default setting is On. On Trims the image.
L R4CC820 short.bk DVARY.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Ink Cartridge Replacement The ink cartridge can be replaced by selecting this option. & See “Replacing an Ink Cartridge” on page 64 Head Cleaning The print head can be cleaned by selecting this option. & See “Cleaning the Print Head” on page 72 Nozzle Check A nozzle check pattern can be printed by selecting this option.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B DVARY.FM 7/3/03 A5 size Memory Card Overwrite This option sets whether or not writing from a computer to a memory card is allowed when the printer is connected to the computer. By default, the setting is Enable. Enable Writing to the card from computer is allowed. Writing, deleting, formatting, and creation of files/directories are possible. Disable Writing to the card from computer is prohibited.
L R4CC820 short.bk Rev. B DVARY.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name ✽ ✽ The Exif and P.I.M. icons appears when the first photograph in the memory card has PRINT Image Matching or Exif Print information and when All, Range, Photo number and Individual selected in Select Photo.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk DVARY.FM 7/3/03 Rev. B A5 size PRINT Image Matching PRINT Image Matching gives control of the printing process to the digital camera, allowing printed images to reflect the camera’s distinctive qualities. When taking photographs using a PRINT Image Matching compatible digital camera, print command information from the camera is embedded in the photo data.
L R4CC820 short.bk Rev. B DVARY.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Plain Paper/EPSON Premium Ink Jet Plain Paper/ EPSON Bright White Ink Jet Paper/EPSON Photo Paper/ EPSON Matte Paper-Heavyweight/ EPSON Premium Glossy Photo Paper/ EPSON Premium Semigloss Photo Paper/ EPSON ColorLife Photo Paper Note: Refer to the digital camera's documentation to find out whether the camera is Exif Print and/or PRINT Image Matching compatible.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk DVARY.FM 7/3/03 Rev. B A5 size PRINT Image Framer 1. Insert the memory card containing digital photo data and PRINT Image Framer data into the printer’s card slot. If you have saved or deleted data on the memory card via your computer and have not ejected the memory card from the printer since, eject and reinsert the memory card before printing. Note: Be sure to properly save the PRINT Image Framer data which named “\EPUDL\AUTOLOAD.
L R4CC820 short.bk DVARY.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name 5. Select the desired PRINT Image Framer data from the Layout menu. The PRINT Image Framer data file is displayed. PRINT Image Framer data is located at the bottom of the Layout menu. Note: You can view PRINT Image Framer layout images on the optional Preview Monitor. The printer’s LCD panel does not display PRINT Image Framer layout images. 6.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk DVARY.FM 7/3/03 Rev. B A5 size Digital Camera Direct Printing This printer features the USB DIRECT-PRINT and PictBridge functions, which enables you to print photos directly from a digital camera that also has the USB DIRECT-PRINT function, by connecting the camera to the printer with a USB cable.
L R4CC820 short.bk DVARY.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name 1. Select All, Range, Photo number and Individual from the Select Photo menu. 2. Make the desired Paper Type, Paper Size, and Layout settings. 3. Change the More Options if necessary. Connecting the digital camera to the printer Note: ❏ Do not print from the computer or from a memory card inserted in the printer’s memory card slot before or while a digital camera is connected to the printer.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk DVARY.FM 7/3/03 Rev. B A5 size 2. Connect the USB cable to the printer’s external device USB connector. 3. Turn on the digital camera if it is turned off. The massage “A digital camera has been connected.” appears for one second on the LCD panel when the connection is established. Printing Print from the digital camera. For more details on printing from the digital camera, refer to its manual.
L R4CC820 short.bk DVARY.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name You can store the following settings: ❏ Select Photo ❏ Paper Type ❏ Paper Size ❏ Layout ❏ Filter in More Options ❏ Small Image Enhancer in More Options ❏ Brightness in More Options ❏ Saturation in More Options ❏ Sharpness in More Options ❏ Contrast in More Options ❏ Automatic Correction in More Options Note: ❏ This function is not available in Basic Mode.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B DVARY.FM 7/3/03 A5 size 2. Press the Custom button for more than two seconds. The message “The present settings have been saved” is displayed in the LCD panel. To you restore stored settings, press the Custom button for more than two seconds. The message “Custom settings will be used.” is displayed in the LCD panel.
L R4CC820 short.bk DVARY.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name ❏ The available CD-R capacities are 640 and 700 MB. ❏ The media except CD-R must be formatted for DOS or Windows. ❏ The format for writing to CD-R is Multisession (Mode 1) and the file system is ISO 9660. Due to the ISO 9660 file system, the contents of a memory card that has 8 or more folder levels cannot be backed up to CD-R.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name DVARY.FM 7/3/03 Rev. B A5 size Printing with an External Device Connecting an external device c Caution: ❏ Not all of the devices that can be connected with USB cable are supported. Contact your regional customer support for details. ❏ Do not connect USB devices other than an external storage device, such as a printer or mouse. The printer may fail.
L R4CC820 short.bk DVARY.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Insert the USB cable to the external device USB connector and insert the other connector into the external storage device. Printing from an external device 1. Insert a medium that contains photo data into the external storage device. 2. If a memory card has been inserted in the memory card slot, remove it.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name INK.FM 7/3/03 Rev. B A5 size Replacing Ink Cartridges Checking the Ink Supply Using the LCD panel To check which cartridge requires replacing, check the LCD panel. Press the u or d buttons to scroll the screen until More Options appears. The ink icons appear beneath More Options on the LCD panel. ✽ ✽ ink icon Ink icon indicates the amount of the ink remaining as follows: Ink icon Status blinks and Ink cartridge is empty.
L R4CC820 short.bk INK.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Replacing an Ink Cartridge This printer uses ink cartridges equipped with IC chips. The IC chip accurately monitors the amount of ink used by each cartridge, so even if a cartridge is removed and later reinserted, all of its ink can be used. However, some ink is consumed each time the cartridge is inserted because the printer automatically checks reliability.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk INK.FM 7/3/03 Rev. B A5 size Note: ❏ You cannot continue printing with one ink cartridge empty, even if the other cartridges still contains ink. Before printing, replace the empty cartridge.
L R4CC820 short.bk Rev. B INK.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name 3. Follow the instructions on the screen and press the OK button. The ink cartridge moves slowly to the ink replacement position. c Caution: Do not move the print head by hand, as this may damage the printer. Always press the OK button to move it. 4. Remove the new ink cartridge from the package.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name c R4CC820 short.bk Rev. B INK.FM 7/3/03 A5 size Caution: ❏ Be careful not to break the hooks on the side of the ink cartridge when you remove it from the package. ❏ Do not remove or tear the label on the cartridge; otherwise, ink will leak. ❏ Do not touch the green IC chip on the front of the cartridge. This can damage the ink cartridge. Do not touch this part.
L R4CC820 short.bk Rev. B INK.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name 5. Open the cartridge cover. Pinch the sides of the ink cartridge that you want to replace. Lift the cartridge out of the printer and dispose of it properly. Do not take the used cartridge apart or try to refill it. The illustration shows replacement of the black ink cartridge. w Warning: If ink gets on your hands, wash them thoroughly with soap and water.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk INK.FM 7/3/03 Rev. B A5 size 8. Press the OK button. The print head will move and begins charging the ink delivery system. When the ink charging process is finished, the print head will return to its home position. c Caution: The progress meter is displayed in the LCD panel while the ink is being charged. Never turn the power supply to the printer off before the completion message is displayed.
L R4CC820 short.bk INK.FM 7/3/03 Rev. B A5 size 70 Proof Sign-off: M.Koike CRE Nakano M.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk CHECK.FM 7/3/03 Rev. B A5 size Improving Print Quality Checking the Print Head Nozzles If you find that the printout is unexpectedly faint or that dots are missing, you may be able to identify the problem by checking the print head nozzles. Note: ❏ You cannot clean the print head if the message “ink out” is displayed or the ink icon flashes to show ink out or ink low on the LCD panel. Replace the appropriate ink cartridge first.
L R4CC820 short.bk Rev. B CHECK.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name 6. The nozzle check pattern is printed out. See the following illustration. If it is necessary to clean the print head, press the OK button to clean the print head. The printer will print an operation check page that includes a nozzle check pattern. Below are sample printouts.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk CHECK.FM 7/3/03 Rev. B A5 size Note: ❏ Print head cleaning consumes some ink. To avoid wasting ink, clean the print head only if print quality declines; for example, if the printout is blurry or the color is incorrect or missing. ❏ Use the Nozzle Check utility first to confirm that the print head needs to be cleaned. This saves ink.
L R4CC820 short.bk CHECK.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name 5. The print head cleaning starts. Note: ❏ If print quality has not improved after repeating this procedure four or five times, turn the printer off and leave it alone overnight. Then, do the nozzle check again, and repeat the head cleaning if necessary. ❏ If the print quality still has not improved, at least one of your ink cartridges may be old or damaged and may need to be replaced.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B CHECK.FM 7/3/03 A5 size 1. Check that no warnings or errors are displayed on the LCD panel. 2. Press the ( maintenance button. 3. Press d button to position the cursor at Print Head Alignment and press the OK button. 4. Follow the instructions displayed on the LCD panel and press the OK button. The following alignment sheet is printed.
L R4CC820 short.bk CHECK.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name 5. From the alignment pattern in set #1 on the printed test sheet, choose the vertical line that is aligned best. Press the u or d button to select the corresponding line number and press the OK button. 6. Repeat step 5 for the alignment patterns in sets #2 and #3. 7. Press the OK button to finish.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Rev. B UPDT.FM 7/3/03 A5 size Cleaning the Printer To keep your printer operating at its best, clean it thoroughly several times a year as follows. 1. Unplug the printer’s power cord. 2. Remove any paper from the sheet feeder. 3. Use a soft brush to carefully clean away all dust and dirt from the sheet feeder. 4.
L R4CC820 short.bk UPDT.FM 7/3/03 Rev. B A5 size c Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Caution: ❏ Do not apply grease to the metal parts under the print head carriage. ❏ Never use alcohol or thinner to clean the printer, as these chemicals can damage the components as well as the case. ❏ Be careful not to get water on the printer mechanism or electronic components. ❏ Do not use a hard or abrasive brush. ❏ Do not spray the inside of the printer with lubricants.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B UPDT.FM 7/3/03 A5 size 3. Remove the paper from the sheet feeder and remove the paper support. 4. Open the printer cover again. Secure the ink cartridge holder to the printer with the protective material and tape as shown below, then close the printer cover. 5. Close the CD/DVD guide if it is open. Raise the output tray, close the printer cover and the paper support. 6.
L R4CC820 short.bk UPDT.FM 7/3/03 80 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B TRBLE.FM 7/3/03 A5 size Troubleshooting The solutions herein are for problems when printing directly from a memory card. Error/Warning Display You can identify many common printer problems using the display on your printer’s LCD panel. Error Display Solution Ink out. Black: T0491 Cyan: T0492 Magenta: T0493 Yellow: T0494 Light Cyan: T0495 Light Magenta: T0496 Replace the ink cartridges shown, with a new ones.
L R4CC820 short.bk Rev. B TRBLE.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name A paper jam has occurred. See your printer’s documentation for information about cleaning the jam. Press the ( maintenance button to eject the jammed paper. See “The paper jams” on page 88 for details. Ink cartridges cannot be recognized. Black: T0491 Cyan: T0492 Magenta: T0493 Yellow: T0494 Light Cyan: T0495 Light Magenta: T0496 Reinstall the cartridge shown.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Rev. B TRBLE.FM 7/3/03 A5 size The inserted card cannot be used with this printer. Use a compatible and formatted memory card. System error. Press and hold the Power and Stop button for 7 seconds to turn off the printer. Turn the printer off, and, after a few seconds, turn it on again. If the error is not cleared, contact your dealer. Error Display Other Ink low Ink icon blinks Obtain a replacement ink cartridge.
L R4CC820 short.bk TRBLE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name ❏ Run the Head Cleaning utility to clear any clogged ink nozzles. & See “Cleaning the Print Head” on page 72 ❏ Run the Print Head Alignment utility. & See “Aligning the Print Head” on page 74 ❏ Use up ink cartridges within six months after opening their packages. ❏ Use the genuine Epson ink cartridges. ❏ Check the LCD panel.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk TRBLE.FM 7/3/03 Rev. B A5 size Incorrect or missing colors ❏ Run the Head Cleaning utility. & See “Cleaning the Print Head” on page 72 If colors are still incorrect or missing, replace the color ink cartridge. If the problem persists, replace the black ink cartridge. & See “Replacing an Ink Cartridge” on page 64 ❏ If you have just replaced an ink cartridge, make sure the date on the box has not expired.
L R4CC820 short.bk TRBLE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name ❏ Remove each sheet from the output tray as it is printed, especially if you are using transparencies. ❏ If you are printing on glossy mediaor transparencies, place a support sheet (or a sheet of plain paper) beneath the stack, or load only one sheet at a time. ❏ Do not touch or allow anything to come into contact with the printed side of transparencies or paper with a shiny finish.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B TRBLE.FM 7/3/03 A5 size Paper Does Not Feed Correctly Paper does not feed Remove the stack of paper and make sure of the following: ❏ The CD/DVD tray is not inserted in the printer and CD/DVD guide is up when printing on paper. ❏ The paper is not curled or creased. ❏ The paper is not too old. See the instructions that came with the paper for more information.
L R4CC820 short.bk TRBLE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Multiple pages feed ❏ Make sure that the paper stack is flush with or lower than the triangular load-limit mark on the edge guide. ❏ Make sure that the paper stack fits under the tabs inside the edge guides. ❏ Make sure that the left edge guide is snug to the left edge of the paper. ❏ Make sure that the paper is not curled or folded.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk TRBLE.FM 7/3/03 Rev. B A5 size ❏ The paper is smooth, not curled or wrinkled. ❏ The paper is of high quality. ❏ The printable side of the paper is face up in the sheet feeder. ❏ The paper stack was fanned before loading. ❏ The paper is not loaded above the triangular load-limit mark on the left edge guide. ❏ The paper stack fits under the tabs inside the edge guides.
L R4CC820 short.bk TRBLE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Paper is not ejected fully or is wrinkled ❏ If the paper does not eject fully, press the ( maintenance button, then open the printer cover and remove the paper. Also, check the Paper Size setting in the LCD panel.If the paper is wrinkled when it comes out, it may be damp or too thin. Load a new stack. Note: Store any unused paper in its original packaging in a dry area.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk TRBLE.FM 7/3/03 Rev. B A5 size If this does not work, replace the ink cartridges. & See “Replacing an Ink Cartridge” on page 64 LCD panel displays a warning or error message If the LCD panel displays a warning or error message, follow the instructions. See “Error/Warning Display” on page 81 for the explanation of warnings and error messages. LCD panel came on and then went out The printer’s voltage may not match the outlet rating.
L R4CC820 short.bk TRBLE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name ❏ If the ( maintenance light is flashing, ink is low. Obtain a replacement cartridge of the appropriate type. To determine which cartridge is low, see “Replacing an Ink Cartridge” on page 64. ❏ If the ( maintenance light is on and ink is out, replace the appropriate ink cartridge.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk TRBLE.FM 7/3/03 Rev. B A5 size Cancelling Printing If you encounter problems while printing, you may need to cancel printing. To stop printing in progress, press Stop button. The printer will cancel all print jobs and stop printing, and eject any pages which is printing. Depending on the printer’s status, printing may not stop immediately.
L R4CC820 short.bk TRBLE.FM 7/3/03 94 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B SPPORT.FM 7/3/03 A5 size Contacting Customer Support Technical Support Web Site EPSON's Technical Support Web Site provides help with problems that cannot be solved using the troubleshooting information in your product’s documentation. If you have a Web browser and can connect to the Internet, access that site at: http://support.epson.
L R4CC820 short.bk Rev. B SPPORT.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name ❏ Names and versions of the software applications you normally use with your product Note: For more information on Contacting Customer Support, see the Online Reference Guide included in the software CD-ROM. Note for users in the Middle East, Scandinavia, and South Africa: Some of these services may be available in English only. For users in North America URL http://support.epson.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name SPPORT.FM 7/3/03 Rev. B A5 size For users in Scandinavia URL http://www.epson.com Telephone Denmark 80 88 11 27 Finland 0800 523 010 Norway 800 11 828 Sweden 08 445 12 58 For users in South Africa URL http://www.epson.co.za Telephone (011) 444-5223 or 0800 600 578 For users in Australia URL http://www.epson.com.au Telephone 1300 361 054 Fax (02) 9903 9189 For users in Singapore URL http://www.epson.com.
L R4CC820 short.bk Rev. B SPPORT.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name For users in Indonesia URL http://www.epson.co.id Telephone/Fax Jakarta (62) 21-62301104 Bandung (62) 22-7303766 Surabaya (62) 31-5479541 Medan (62)61-4516173 Yogyakarta (62) 274-566353/22-143 Telephone For users in Hong Kong URL http://www.epson.com.hk Phone (852) 2585-4399 Fax (852) 2827-4383 For users in Malaysia URL http://www.epson.com.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name OPTN.FM 7/3/03 Rev. B A5 size Options and Consumable Products Options The options below are available for your printer. Preview Monitor When printing directly from a memory card, the Preview Monitor C860✽✽✽ lets you easily find and view photos on the memory card. It also allows you to preview the layout of photos after making layout settings on the printer's LCD panel. Option: 2.
L R4CC820 short.bk OPTN.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name ❏ A 1.6-inch monitor is also available for this printer. Bluetooth Photo Print Adapter The optional Bluetooth Photo Print Adapter is a wireless communication module used to print from digital still cameras, digital video cameras, PDAs, Mobile PCs, and other devices that support Bluetooth wireless technology without cables when connected to the printer.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B OPTN.FM 7/3/03 A5 size Ink cartridges You can use the following cartridges with your printer. Type of ink Product numbers of ink Black ink cartridge T0491 Color ink cartridge Cyan Magenta Yellow Light Cyan Light Magenta T0492 T0493 T0494 T0495 T0496 Note: The product numbers of ink cartridges may vary by location.
L R4CC820 short.bk OPTN.FM 7/3/03 102 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B BLUE.FM 7/3/03 A5 size Using the Bluetooth Photo Printer Adapter About the Bluetooth Photo Print Adapter The optional Bluetooth Photo Print Adapter is a wireless communication module used to print from digital cameras and other devices with Bluetooth wireless technology without cables when connected to the printer.
L R4CC820 short.bk Rev. B BLUE.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Connecting and Disconnecting the Bluetooth Photo Print Adapter Connecting 1. Turn off the printer. c Caution: Do not connect this product while the printer is on. Doing so may cause the printer to malfunction. 2. Insert the Adapter connector into the external device USB connector as shown below. 3. Turn on the printer. The Adapter’s light comes on. Disconnecting 1. Turn off the printer.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name BLUE.FM 7/3/03 Rev. B A5 size 2. Remove the Adapter’s connector from the external device USB connector as shown below. c Caution: Do not remove this product by pulling on its upper section. Doing so may damage the product. Bluetooth Settings Use the LCD panel on the printer to make settings for Bluetooth wireless communication.
L R4CC820 short.bk Rev. B BLUE.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Outline of settings Setting Choices Description Device Name Setting printer name-(number) (Default = 0) If multiple printers enabled with Bluetooth are in the same communication range, distinguish them by assigning each a number from 0 through 9. To make the Device Name Setting take effect, turn the printer off and then back on.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk BLUE.FM 7/3/03 Rev. B A5 size 1. Connect the Bluetooth Photo Print Adapter to your printer. Refer to “Connecting and Disconnecting the Bluetooth Photo Print Adapter” on page 104. c Caution: Be sure to turn off the printer before connecting this product. Otherwise, the printer may malfunction. 2. Press the u or d button to highlight More Options, and then press the OK button. 3.
L R4CC820 short.bk BLUE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name The Bluetooth Passkey Setting (Bluetooth PIN) If you select Bonding as the Communication Mode or On as the Encryption setting, the Passkey must be entered into a Bluetooth wireless-capable device before it can communicate with and print from the printer. The default Passkey is 0000. To change the Passkey, follow the instructions below. A Passkey of 1234 is used as an example. 1.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Rev. B BLUE.FM 7/3/03 A5 size 4. Select numbers for the second through fourth digits in the same manner. Note: To go back to a previous digit, highlight Back and then press the OK button. 5. When Apply appears, press the OK button to activate the Passkey. Printing Print settings are made using both the printer’s LCD panel and the device sending the print job. Refer to the following table to determine where to make each setting.
L R4CC820 short.bk BLUE.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Note: The settings available may vary among Bluetooth wireless-capable devices. For more information, refer to your device’s documentation. For more information about printing from Bluetooth wireless-capable digital still cameras, digital video cameras, PDAs, mobile PCs and other Bluetooth wireless-capable device, refer to the documentation for both the device and the printer.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name SPEC.FM 7/3/03 Rev.
L R4CC820 short.bk Rev. B SPEC.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Paper specifications Single sheets: Size A4 (210 × 297 mm) A5 (148 × 210 mm) Letter (216 × 279 mm) Half letter (139.7 × 215.9 mm) Legal (216 × 356 mm) Executive (184.2 × 266.7 mm) 10 × 15 cm 5 × 7" (127 × 178 mm) 3.5 × 5" (89 × 127 mm) Paper types Plain bond paper, special paper distributed by Epson Thickness 0.08 to 0.11 mm (0.003 to 0.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name SPEC.FM 7/3/03 Rev.
L R4CC820 short.bk Rev. B SPEC.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Photo Paper: Size A4 (210 × 297 mm) Letter (216 × 279 mm) Panoramic (210 × 594 mm) 10 × 15 cm 4 × 6" (102 × 152 mm) No perforations 4 × 6" (113.6 × 175.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Rev. B SPEC.FM 7/3/03 A5 size Note: ❏ Poor quality paper may reduce print quality and cause paper jams or other problems. If you encounter problems, switch to a higher grade of paper. ❏ Do not load curled or folded paper.
L R4CC820 short.bk Rev. B SPEC.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name A B-L B-R D Diagonal lines show printable area. A: The minimum top margin is 3.0 mm (0.12"). When loading multiple sheets of EPSON Photo Quality Glossy Film, the minimum top margin is 30.0 mm (1.2"). B-L: The minimum left margin is 3.0 mm (0.12"). B-R: The minimum right margin is 3.0 mm (0.12"). C: The minimum bottom margin is 3.0 mm (0.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Rev. B SPEC.FM 7/3/03 A5 size Ink Cartridges Black (T0491) Cyan (T0492) Magenta (T0493) Yellow (T0494) Light Cyan (T0495) Light Magenta (T0496) Color Black.
L R4CC820 short.bk Rev. B SPEC.FM 7/3/03 A5 size c Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Caution: ❏ Epson recommends the use of original Epson ink cartridges only. Products not manufactured by Epson may cause damage to your printer and will not be covered by Epson's warranties. ❏ Do not use an ink cartridge if the date on the package has expired. ❏ Do not refill the ink cartridge.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Rev. B SPEC.FM 7/3/03 A5 size Electrical 120 V Model 220-240 V Model Input voltage range 99 to 132 V 198 to 264 V Rated frequency range 50 to 60 Hz Input frequency range 49.5 to 60.5 Hz Rated current 0.45 A (Max. 0.55 A) Power consumption Approx. xxx W (ISO10561 Letter Pattern) Approx. xxx W in Sleep mode 0.25 A (Max. 0.3 A) Note: Check the label on the back of the printer for the voltage of your printer.
L R4CC820 short.bk Rev. B SPEC.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Built-in card slots Card Slots CF Type II card slot Compatible with “CF+ and CompactFlash Specification 1.4” SmartMedia card slot Compatible with “SmartMedia Standard 2000” Memory Stick/MemoryStick PRO card slot Compatible with “Memory Stick Standard version 1.3” SD/MMC card slot Compatible with “SD Memory Card Specifications / PART1. Physical Layer Specification Version 1.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B SPEC.FM 7/3/03 A5 size * Maximum capacity is 128 MB. ** Adapter required. Media type settings The Media Type setting determines what other settings are available, so you should always make this setting first. Refer to the corresponding media type under which it is grouped (shown in larger type). For some media, there are several Media Type settings from which to choose.
L R4CC820 short.bk SPEC.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.
Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name R4CC820 short.bk Rev. B SPEC.
L R4CC820 short.bk SPEC.FM 7/3/03 Rev. B A5 size Proof Sign-off: M.Koike CRE Nakano M.
R4CC820 short.bk Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Rev. B SPEC.
L R4CC820 short.bk Rev. B SPEC.FM 7/3/03 A5 size Proof Sign-off: M.Koike CRE Nakano M.Otsuka editor name Standards and Approvals U.S. model: Safety UL 60950 CSA No.60950 EMC FCC Part 15 Subpart B Class B CSA C108.