User's Manual

ManualsBrandsSeiko Epson ManualsElectronicsHeart Rate Activity Monitor

February 2014 printed in Japan.

Thank you very much for purchasing the PS-100 Series.

Read this guide carefully to use this product correctly. This guide describes how to set up and

conﬁgure the product. See the User's Guide for more detailed information. You can download the

guide from the following address.

http://www.epson.jp/support/

It is prohibited to copy part or all of this guide without permission.

Contact your store of purchase if there are any missing or damaged components.

This product

Charging cradle Quick Start Guide

(this document)

Warranty

Booklet

The AC adaptor is optional. Purchase separately if required.

Checking the Package Contents

1. For Your Safety

Before Getting Started

Quick Start Guide

Make sure you read the manuals (this document and the electronic manual "User's Guide") ﬁrst

to use this product safely. The product may malfunction, or an accident may occur if it is handled

incorrectly.

• Keep the manuals handy to help you resolve any problems.

• When taking this product out of the country of purchase, check the laws and regulations in the

destination country before you travel.

• This product is not a medical device. Use this product as an indicator during physical exercise.

Meaning of Symbols

Manuals for this product use the following symbols to warn against dangerous operations and

handling to prevent personal injury and property damage. Understand the meaning of the

symbols before reading the explanation.

Warning

Ignoring this warning may cause serious personal injury or death.

Caution

Ignoring this warning may cause personal injury or property damage.

This symbol indicates things you must do.

This symbol indicates things you must not do.

PS-100

Series

Notes on Using PS-100 Series and Components

Warning

Exercise according to your physical condition. Avoid sudden bursts of activity and overly vigorous exercise.

Stop exercising and consult your doctor if you feel unwell during exercise.

This product is a highly accurate sensor and able to measure your pulse rate; however, this is not a medical

device. If you have any concerns, consult our information center before using this product.

Do not look at this product constantly while walking or exercising. You may fall or have an accident. Be aware of

your surroundings.

This product is composed of precision equipment and electronic parts. Do not use or store this product in the

following environments. It may cause an electric shock or ﬁre, or the product may malfunction or breakdown.

• Locations where the temperature and humidity vary widely • Near volatile substances

• Sooty or dusty places • Near a ﬁre

• Near a strong magnetic ﬁeld (for example, near a speaker)

Do not disassemble this product, and do not attempt to repair this product by yourself. It may cause an electric

shock or accident.

Do not leave this product within reach of young children.

Caution

Stop using the product immediately and consult your doctor if you have an allergic reaction or a rash while

wearing it.

Do not hold this product directly under a tap. Steam, soap, and hot spring agents may compromise the

waterproof feature or cause corrosion.

Notes on Using the Charging Cradle

Warning

Beware of the following when using the charging cradle, AC adaptor, and USB cable. Failure to note the

following may result in an electric shock, a ﬁre, or a malfunction.

• Do not connect or disconnect the power cord with wet hands.

• Do not use a damaged AC adaptor or USB cable.

• Do not use them when they are emitting smoke or an unusual smell, or making noise.

• Do not use them when any foreign substances or liquid such as water enters them.

• Do not use the USB cable when any foreign substances such as dust is on the terminals.

• Do not use any adaptor other than the speciﬁed adaptor for charging.

Notes on Taking Care of PS-100 Series

Do not attach the charging cradle when the product is wet. It may cause corrosion of the terminal

section or a malfunction. When the product is wet from water or sweat, wipe it with a damp cloth,

remove the moisture with a towel, and then dry naturally before attaching the charging cradle.

2. Wearing PS-100 Series

Wear the product closely around your wrist without slack. Tighten the wristband if your

pulse is not measured correctly while exercising.

Measure the circumference of your wrist, for example, using a string. Measure

the circumference closely at the position indicated in the illustration without

touching the ulna bone.

Place the string on the "Wristband adjustment hole nder" to nd the hole

number.

Ulna

S 1 S 3 S 5 S 7 S 9 L2 L4 L6 L8 L1 0

S 2 S 4 S 6 S 8 L1 L3 L5 L7 L9 L11

0 14010 20 30 40 50 60 70 80 90 100 110 120 130 150 160 170 180 190 200 210

Example: A piece of string that measures the circumference of your wrist.

Align the end of the string to 0mm. Use hole number S8

Wristband adjustment hole ﬁnder

Summary of content (2 pages)

PAGE 1
Notes on Using PS-100 Series and Components Warning Exercise according to your physical condition. Avoid sudden bursts of activity and overly vigorous exercise. Stop exercising and consult your doctor if you feel unwell during exercise. PS-100 Series This product is a highly accurate sensor and able to measure your pulse rate; however, this is not a medical device. If you have any concerns, consult our information center before using this product.
PAGE 2
3. Unfasten the buckle of the wristband as shown below. 3. Detach the charging cradle from the product when charge is complete. Detach them by opening the part indicated with from the other side. outwards and push the product 4. Insert the band fastener into the hole number you checked in step 2. Band fastener Hole number 4. Initial Configuration Insert the band fastener into the wristband adjustment hole You need to perform initial configuration before using PS-100 Series for the first time.