User's Manual

If you press this key for a few seconds, your Transmitter will be switched
ON or OFF. Once you have switched the unit ON, just press this key again
slightly and you can edit various parameters such as CHANNEL, GROUP,
RF POWER LEVEL and LOCK/UNLOCK. Once you are in the LOCK position
no further operation is allowed. And in a few seconds, the display will show
the current selected frequency (in MHZ). Battery level will also be shown.
Once you are in operation mode, you can access this key to edit certain
parameters. Press this key for a few seconds and the unit will enter in the
MUTE mode. (In this way, you can tell your Bass Player what you think about
the Sound Engineer without everybody knowing that!). Press it again for a few
seconds and you will unmute the unit.
This nice blue LCD will indicate the current operation status.
This connector is used to connect the unit with the clip microphones. for
example, HM-38 condenser microphone or LM-10 clip microphone.
With the rechargeable batteries put inside, use the charger supplied to
recharge the batteries.
This unit may be powered from one pair dry or rechargeable batteries,
Um3 size AA 1.5V.
,
, for Dynamic or Condenser microphone
, for Guitar, bass and keyboards
, GND
It is a flexible antenna. To get effective transmission, never cover the
antenna with hand, clothes, etc. during operation, and always position
the transmitter nearby the receiver.
It is the detachable belt clip for e asy carry during the live applications.
3. CONTROL ELEMENTS
SP
OTLIG
HT
Phantom power supply for Condenser microphone
You don't want accidental change of frequency or other setting in the middle of a
performance, do you? Any miss-operation during a live performance can be easily
avoided thanks to the LOCK function. With the LOCK function ON no further change
of setting is allowed until the Transmitter is unlocked. To access the LOCK Menu,
press the CH/ON key four times and then press the SELECT key to lock or unlock
the Transmitter Settings. Your choice of setting will automatically be saved into the
Transmitter in a few seconds. The blue display shows "lock" and "unlock" depending
on the operating mode.
Fig 10: LOCK Fig 11: UNLOCK
Sometimes, there are things that you want to te ll to your Friends on stage or
your nearby Companion during a Meeting but not necessarily to the rest of the
world especially if you are ON LIVE on CNN... A smart feature on your Transmitter
allows you to easily MUTE the microphone so you are free to talk to the people
next to you without the rest of the world hearing what you say . To enter into
MUTE function simply press the SELECT key for a few seconds and the Transmitter
will mute any audio signal going to the Receiver. Press SELECT again for a few
seconds and you will UNMUTE the Transmitter.
3. CONTROL ELEMENTS
4. OPERATION
(1)
(4)
(3)
(2)