LICENSING REQUIREMENTS This equipment complies with Part 74 of the FCC Rules. A license is required for operation subjective device will be issued only to the following: Sensed inter nations] broadcast station or low power TV station. Low power auxiliary stations will be Sensed for used with a specific broadcast or low power TV station or combination of stations lioness to the same licensee within the same community.
HAVING BEEN DEVOTED TO R&D FOR YEARS, OUR COMPANY IS SPECIALIZED IN MANUFACTURING BI QUALITY PROFESSIONAL WIRELESS MICROPHONES. THIS REALLY ELABORATED MODEL SERVES TO YOUR COMPLETE SATISFACTION ON MANY OCCASIONS ALBACORE, FAMILY AND FRIEND GATHERING. FEATURE: TRANSMITTER OF SMT WITH HIGH-END QUALITY AND TECHNOLOGY, ADVANCED SKILLS TO MAKE THE CONSTRUCTION MORE CONVENIENT TO ANALYZE CAPSULE, MODULE OF TETRAMETER.
SPECIFICATION: PERFORMANCE SPECIFICATION Carrier Frequency Range UHFM4.9fol IMHO Microphone Element Dynamic Microphone Oscillation Mode Quartz controlled fixed frequency Modulation mode FM {F3E} Antenna Built-in RF Carrier Power LP (may be adjusted bass ad on regulation) Effective Radiated Power (Spurious} Less than 2mW Tone Frequency 32.768KHz Pr-Emphasis 500usS Current Drain 35mA Battery More than 8 hours (Alkaline) Dimensions 248mm Weight Approx.
(HAND HOLD MICROPHONE TRANSMITTER) SMT is design of high quality and precise technology. High quality dynamic cartridge is used to produces Hi-F sound, which is soft, broad and deep, most suitable for KTV entertaining. OTHER FEATURES: * “STAND-BY” function. * Steel net based fo prevent from rifling.
BATTERY INFORMATION: . NOTE: Make sure the power switch is in the "OFF" position when changing or installing new battery. Average life on an alkaline battery is 6-8 hours. Be sure to use good quality long life 8V alkaline battery only. 1. This microphone has a 3-level power switch design, 2. In using first tum on the receiver and then the transmitter. 3. New battery the power light is in "OFF", The fight is "ON". It indicates the battery needs to be replaced. 4. Remember to turn the switch "OFF".