DVB-T Set-Top-Box DTR 705 USER MANUAL DTR 705 English
FCC and Safety Information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Precautions Please read these precautions before operating this unit. Power cord protection To avoid any malfunctions of the unit, and to protect against electric shock, fire or personal injury, please observethe following. Hold the plug firmly when connecting or disconnecting the AC power cord. Keep the AC power cord away from heating appliances. Never put any heavy object on the AC power cord. Do not attempt to repair or reconstruct the AC power cord in any way.
CONTENTS FCC and Safety Information INTRODUCTION Front panel Rear panel Remote control SYSTEM CONNECTION General about connections Connection to the TV and video recorder with SCART Connecting a HiFi System 1 1 2 3 3 3 GETTING STARTED WELCOME PAGE System setup INSTALLATION Automatic channel scan Manual channel scan Aerial Adjustment 4 4 5 5 6 OPERATION Accessing the favorite channels Access the Electronic Programme Guide(EPG) 7 7 CHANNEL Channel list Channel list menu TV Channel list Radio Channel li
INTRODUCTION Front panel Standby button Channel up Power indicator Channel down DTR 705 Remote sensor Rear panel TV aerial Coaxial Digital Audio AUX Scart for connection to a VCR or a satellite receiver AC Mains AC220-240V ~50/60Hz RS232 DTR 705 DVB-T SET TOP BOX POWER SUPPLY: AC 220-240V~50/60Hz POWER CONSUMPTION: 10WATTS Art-Nr.
INTRODUCTION 1 1 Power On/Standby (Switch the STB ON/STANDBY mode) 2 Numeric entry (Enter numeric values and to select the channel directly by entering it's number) 3 Menu (Open up menu) 4 Red Button (For teletext function) Page up 5 Cursor/ Enter ( to select sub-menu from the main menu and channel +/-, 11 DTV/ VCR 2 MENU 3 12 4 5 VOL VOL + OK - 14 CH MUTE PAUSE FAVORITE LANG INFO X 8 EPG 15 16 RECA LL TV/RADIO 6 Yellow Button (For teletext function) 7 Mute 8 RECALL (
SYSTEM CONNECTION General There are many different types of TV/VCR and other equipment that you can connect to the STB.In this manual you will see some of the most common ways to connect your equipment. Connection to the TV and video recorder with SCART Scart cable Antenna RS232 AC220-240V ~50/60Hz DTR 705 DVB-T SET TOP BOX POWER SUPPLY: AC 220-240V~50/60Hz POWER CONSUMPTION: 10WATTS Art-Nr.
GETTING STARTED WELCOME PAGE If you use the STB the first time or after you delete all channel information in the STB,the "WELCOMOE PAGE" picture for quick shortcut menu will display . Press "1~5" numeric button to enter Region, OSD Language Tuner Power, Auto Scan and Main Menu quickly. WELCOME PAGE 1 OSD Language 2 Region MENU Press to return. 3 Tuner Power 4 Auto Scan 5 Main Menu System setup Main Menu MENU 1 Press the to enter the setup menu of the STB.
Installation Automatic channel scan MENU 1 Press the to enter the setup menu of the STB. 2 Press to select "Installation". 3 Press 4 Select the "Auto Scan" and press appears 5 Press to select Scan mode and highlight "Search",then press the to enter the sub-menu. , Auto Scan menu to confirm . Installation Auto Scan Auto Scan Channel Scan Aerial Adjustment Scan Mode Search Auto Scan All UHF 470.0~862.0 MHz Ch No. Frequency 858.
Installation Aerial Adjustment When you adjust the location of aerial,use this menu to check signal intensity and quality of the selected channel. MENU 1 Press to enter the main menu of the STB. 2 Press 3 Press the 4 Select the "Aerial Adjustment" and press Adjustment appears. 5 Press to select "Installation". to enter the sub-menu. , Aerial to select the desired channel No. Main Menu Channel Installation Installation Aerial Adjustment Auto Scan Channel Scan Aerial Adjustment Ch No.
OPERATION Accessing the favorite channels FAVORITE Favorite Group 1 1 Press to open up the "FAVOURITE LIST". 2 Press 3 Select the favourite channels and press selected channel. 0001 HN Radio2 0002 BBC NEWS 24 0003 BBC Text Channel 0004 BBC Two to select the desired favourite group. Installation to view the System Setup Tools Accessing the Electronic Program Guide (EPG) Accessing the EPG of all channels: EPG 1 Press EPG to enter EPG menu .
CHANNEL Channel list There are four ways of channel selection - stepping through the channel list, selection by number, from the on-screen channel list, and using the electronic programme guide(EPG). 1 Stepping through the channel list: To move through the channel list, press the upward arrow or downward arrow key on the remote control. 2 Selection by number: Enter the channel list number directly by remote control to select desired channel.
CHANNEL TV Channel list 1 Enter Channel menu. 2 Press to highlight TV channel list. 3 Press ,TV channel list appears. 4 Press to select channel group. 5 Press channel to preview the desired TV Channel List All Channel 0001 BBC CHOICE 0002 BBC NEWS 2 1 Favorite 2 Select 6 Press Move 3 Group Preview Find 4 Sort 5 Edit Page OK Enter MENU Exit to view the selected channel in full screen. Favorite 1 In channel list menu, press numeric button "1" to setup Favorite item.
CHANNEL TV Channel list (Continued) Sort In channel list menu, press numeric button "4" to open "Sort" menu. 1 2 Press to highlight sorting way you want and Press to confirm. Default: Name (A-Z): Name (Z-A): FTA: Locked: TV Channel List All Channel Sort 0001 BBC CHOICE Default 0002 BBC NEWS 2 Name(A-Z) Sorting by scanning result. Sorting in Alphabetical Order. Sorting in Alphabetical Order. Sieving out all free fare channels. Accumulating all locked channels and list in the last of TV Channel List.
CHANNEL TV Channel list (Continued) Edit: Edit Channel Use edit to rename a channel. All Channel In "Edit Channel" menu, press numeric button "4" to open edit channel menu.Highlight name item and press to confirm.The mock keypad will be showed. 0001 BBC CHOICE Edit Channel 0002 BBC NEWS 2BBC ONE Name Video PID Audio PID PCR PID Save Exit Input letter and numeric one by one by pressing and press to confirm.
CHANNEL Delete All Favorites Use this menu to delete all favorite channels. 1 Enter Channel menu. 2 Press to highlight Delete All Favorites item. 3 Press the password. 4 Input the password using the numeric buttons,a warning window is displayed.
SYSTEM SET-UP Many aspects of your STB can be set to reflect your circumstances and preference. The SETTINGS menu screen is accessed from main menu. System setup main menu Use system menu to setup OSD Language, TV System, Start up Service,Region and Time, Timer Setting, OSD Setting and Parental Lock. Main Menu Channel MENU 1 Press 2 Press 3 Press 4 Press to highlight the desired item and press to confirm . Installation to enter the main menu of the STB. Setup to select "Setup".
SYSTEM SET-UP TV System Use this menu to setup Display Mode,Aspect Ratio.Dolby Digital, Video Output and LCN Mode. 1 TV System Enter "System Setup" menu, highlight "TV System". 2 Press 3 Press to select the desired item and press to setup the desired selection. 4 Press Display Mode Aspect Ratio Dolby Digital Video Output LCN Mode ,the sub-menu appears. Select Auto 4:3PS Off CVBS Off Change MENU Exit to confirm. Display Mode: TV System menu is to set up the broadcast system.
SYSTEM SET-UP Start up Service Use this menu to setup a start up service when you power on STB. 1 Enter "System Setup" menu, highlight "Start up Service". 2 Press 3 Press to select the desired item and press to setup the desired selection. 4 Press ,the sub-menu appears. Start up Service Boot on Service Mode Start up Service On TV to confirm.
SYSTEM SET-UP Timer Setting Various time can be set, such as program time, Sleep time. 1 Enter "System Setup" menu, highlight "Timer Setting". 2 Press 3 Press to select the desired item and press ,the sub-menu appears. 4 Press to highlight the desired item and press to set up the selection you want. Time Setting Program Timer Sleep Timer Load Default Timer Setting ,the Timer Setting menu appears. Select OK Enter MENU Exit MENU 5 Press to exit.
SYSTEM SET-UP OSD Setting You can set Subtitle On/Off,OSD Timeout, OSD Transparency, and load default OSD setting. 1 Enter "System Setup" menu, highlight "OSD Setting". 2 Press 3 Press to select the desired tem and press sub-menu appears. OSD Setting ,the to Select MENU 5 Press On 5 Off Load Default OSD Setting Press to highlight the desired item and press set up the selection you want. 4 Subtitle Display OSD Timeout OSD Transparency ,the OSD Setting menu appears.
Tools In Tools menu ,you can see the software information, play game, Load factory default settings, upgrade software, help using remote control and enter welcome page for quick shortcut menu. Tools main menu MENU 1 Press 2 Press Main Menu to enter the main menu of the STB. Channel to select "Tools". Installation 3 Press the 4 Press press 5 Press to enter the sub-menu. System Setup to highlight the desired item and to confirm . Tools Select MENU to exit.
Tools Load Factory Default You can re-set the STB back to factory settings, clear all existed channels ae in this menu. Tools 1 Enter "Tools" menu, highlight "Load Factory Default". 2 Press 3 Input the password using the numeric buttons(the default password is "0000"),a confirmation window is displayed. ,you will be asked to input the password.
Veseg GmbH Ostring 60 D-66740 Saarlouis-Fraulautern www.SEG.