User's Manual
Table Of Contents
Thank you for purchasing this Wireless Musical Eye Mask. Please read these
instructions and warnings carefully before use, to ensure safe and satisfactory
operation of this product.
The Wireless Musical Eye Mask is suitable for Bluetooth compatible device
like mobile phones. Users can listen to music and conduct phone calls hands
free.
The article is for personal use only and is not intended for commercial
applications.
The article may only be used in the manner described in the instructions.
Any other use is deemed to be improper.
Before using the article, please read the instructions through carefully and
keep them for future reference.
If you pass the article on to third party, it must always be accompanied by
this User Manual.
If you have any question, please contact the customer service department.
Intended Use
Safety Instructions
Dangers of Injury
Keep the article and the package away from children and animals as they
can swallow small parts.
Supervise children using the article. It is not a toy.
Always maintain a gap of at least 10 cm between the headphones and a
pacemarker or an implantable cardioverter debrillator (ICD) as the article
generates magnetic elds.
Do not crush or pierce the battery! Do not expose the battery to high
pressure, as this may cause an internal short-circuit and overheating.
The headphones and their rechargeable battery must not be taken apart,
thrown into a re, immersed in liquids or shortcircuited.
If the headphones are not used for a prolonged period of time, recharge it
regularly (roughly every 3 months).
Material and Article Damage
Always keep the headphones dry and do not expose them to any extreme
temperatures, electrostatic interference or dust.
Do not expose the article to any severe impacts or high pressure.
In the event of damage/faults, switch the article off immediately. Do not
use it if it is damaged.
Never repair or modify an electrical article by yourself, but instead always
visit your nearest customer service department / specialist to guarantee
your own safety. In the event of damage, contact the customer service
department.
Switch the article off after use to conserve the battery.
Only ever use the article in environments in which the wireless Bluetooth
technology is permitted.
Prolonged storage or use may impair the quality of the ear cushions.
Package Contents
Wireless Musical Eye Mask
Micro USB Charging Cable
User Manual
Charging the Battery
Volume Down/Previous Song
Play/Pause/Answer/Hang Off/Redial
LED Status Light/Microphone
Volume Up/Next Song/SIRI
Charging Port
5
WARNING: Avoid excessive volumes, particularly over extended periods or in
the case of frequent use. Listening to music at maximum volume for prolonged
periods can lead to hearing damage. Its best to avoid extreme volume when
using this product, especially for extended periods. For your own safety, please
be aware of your surroundings when using this product.
Make sure the article is switched off. Then:
1. Connect the micro USB end of the charging cable to the Charging Port [5]
on the beanie and the standard USB end to a power source like PC USB
or USB mains charger.
2. The LED Status Light [4] will be red whilst charging. It will turn to blue as
soon as the battery fully charged.
Before you can use this article, it need to be paired to your device. To do
this:
1. Long press the Play/Pause [2] button for 3 seconds until the LED Status
Light [4] starts to ash alternately red and blue quickly.
2. Switch on Bluetooth on your phone or other Bluetooth enabled device.
3. Search and select Musical Eye Mask from the list of found devices.
4. If asked for a passcode, enter 0000.
5. After paired successfully, only the blue light ash slowly.
6. When the article switched on next time, it will automatically search for and
attempt to connect to the last paired device.
3. Music selection: Short Press the Previous [1] button or Next [3] button to
to select previous or next songs.
NOTE: Play/Pause and Music Selection functions will only work on devices
which support Bluetooth prole AVRCP.
Call-Handling
1. Answer a call: When a call coming, it will play a ring tone. Then press the
Play/Pause [2] button to answer. During the call, you can increase and
decrease the volume by long press Volume +[3] or Volume - [1] buttons.
2. Reject a call: When a call coming, it will play a ring tone. Long press the
Play/Pause [2] button for 2 seconds to reject it.
3. End a call: During a call, short press the Play/Pause [2] button to end a call.
4. Re-dial: Press the Play/Pause [2] button twice in quick succession to redial
the last phone number you called.
Acticate/Deactivate SIRI
1. Acticate SIRI: Press the Volume + [3] button twice in quick succession to
activate SIRI on iOS device.
2. Talk to Microphone [4] directly to communicate with SIRI, its the same
effect with talking to iOS device directly.
3. Deactivate SIRI: Short press Play/Pause [2] button to deactivate SIRI.
device and theres no obstructions like walls or other electronics devices
between the article and the device.
3. Only one device can be connected to the article at a time, ensure theres
no other Bluetooth device already connected to the article.
4. If you receive an intermittent signal, please ensure the article is in the
effective range from your device.
Specifications
Washing Guidelines
Please remove the electronic components from the Eye Mask before washing.
Hand wash only.
Hand wash ONLY
DO NOT dry clean
DO NOT bleach
DO NOT iron
DO NOT tumble dry
Wash with cold water
WIRELESS MUSICAL EYE MASK
Pairing a New Bluetooth Device
If need to pair with a new Bluetooth device, follow below steps:
1. Make sure the Bluetooth is turned off on the previous paired device.
2. Follow Pairing a Bluetooth Device instructions from step 1.
NOTE: To preserve the battery, the article will switch off automatically if no
Bluetooth connection for 3 minutes.
RECHARGEABLE
LI-POLYMER BATTERY
HANDS FREE
TALKING
BUILT-IN
MICROPHONE
COMPATIBLE WITH
ALL SMART PHONES
5
Speaker
Speaker
Dangers of Fire and Explosion
Interface
Pairing a Bluetooth Device
Caution! Do not expose the headphones to any high temperatures over
70℃ ( like hair dryer, heating, prolonged sunlight etc.,) The battery inside
of the headphones may overheat and explode as a result.
Only charge up the headphones in an ambient temperature of from 10℃ to
40℃.
How to Use
Playing Music
1. Play/Pause: Short Press the Play/Pause [2] button to switch between play
and pause status.
2. Adjust Volume: Long press the Volume + [3] button and Volume - [1] button
Troubleshooting
If you cannot connect the article to your device, please try the following:
1. Ensure the article is charged, switched on, paired with and connected to
If the article is under using, it will stop working when charging.
If the article is crashed, it will be reset when charging.
NOTE: It will take approx. 2 hours to be fully charged.
your device.
2. Check if the article is in the effective range (20 meters/66 feet) from your
Speaker Unit: 32 / 10mm
Battery: 3.7v 150mAh Rechargeable Li-polymer Battery
Standby Time: Over 300 Hours
Playing Time: 13 Hours
Charge Time: 2 Hours
Made in China
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.