Operating Manual

We will develop early pregnancy test strips soon
5 Button Operation
Up Button for Selection
Down Button for Confirmation
(it’s also power button)
1.Invalid results: If the quality control line does not appear,
take the test again. (There are two lines in the strip. The
upper line is called control line and the bottom one is called
test line. If the control line is missing, the strip is invalid.)
2.When the result exceeds the normal range（3-70mIU/ml), it
is recommended to first confirm whether impurities have
been introduced. If the result is confirmed, see a medical
professional for comprehensive reproductiveendocrine
examination.
3.The reagent strip can be used to directly collect urine
samples. The best sample is in the middle section of the
stream.
4.Do not keep the reagent after sample collection at room
temperature (68-77˚F) for over 4 hours.
5.If the charging cable of this product is damaged, it can be
replaced with any charging cable of the same model that
meets the specifications.
6.During the startup process, do not insert the reagent strip
when the device starts to reset and self-check.
① Power on / off: in the shutdown state, press and hold the
button for 3 seconds, the device starts；In the power-on
state, press and hold the Down button for 3 seconds, the
device is shutting down.
② Menu operation: you can select different menus by the up
button
③ Items confirmation: you can comfirm by the down button
after select the menu.
④ Abnormal handling: In case of abnormal operation, press the
up and down buttons simultaneously for 7 seconds, the device
will automatically restart.
⑤ Breath screen :After 5 minutes of inactivity, the device will
automatically turn off the screen. You can press any key to
light the screen.
⑥ Automatic shutdown: After 10 minutes of inactivity, the
device goes shutting down.
Colloidal Gold Immunochromatographic
Test Strip Monitor
Step 1: Log into your account on the app.
For the first time to use, please complete
the registration and finish the relevant
personal health information according to
the prompts. The APP will give you test
schedule intelligently.
Step 2: Turn on the monitor based on its
operating manual, and connect to the app
via Bluetooth
Step 3: Before opening each box of reagent
strips, scan the QR code on the box using
the QR code function in the app to calibrate
the reagent calibration curve.
Step 4 : Open the reagent box and remove
the detection card from the sealed
aluminum foil bag. Urine can be directly
absorbed through the reagent strip, and the
best sample is in the middle section of the
stream. (Note: mid-stream urine is urine
discharged in the middle of urination,
removing interference from the initial and
final urine).
Step 6 : Observe whether the red quality
control line appears near the handle in the
middle window of the reagent detection
card. If it does appear, the test is normal; If
it does not, the test has failed and a re-test
is required. If the operation process is
normal, the sample is large enough, and the
sample and reagent detection card are
normal in nitrocellulose membrane chroma-
tography, the quality control line will display
normally.
6
Step 7 : Sync the data to the app and read
the result. Users could get hormone curve
and monthly report after multiple measure-
ments.
Step 5: After 5 minutes of urine absorption,
discard the shell and urine absorption
portion.
Step 8: Finally, long press for 3 seconds to
shut down and discard the used reagent
strip into the trash.
7
This product contains
Device ×1
USB Cable ×1
Manual ×1
Warranty card ×1
The Minimum Detection Limit ：5mIU/ml
Accuracy: CV≤20%
Battery Capacity: 650mah
Bluetooth: 5.0
Input Voltage: DC 5V
Rated Current: 1A
Operating Condition: 41℉-104℉, Relative Humidity≤90%
Search for and download Seein from the app store ( available
for both Android and iPhone ), and open the app for account
registration. After registration, you will receive an activation email.
Activate the account based on the prompts. Then , you can link
your device to the app according to the prompts. Successfully
linked, the app will read your test results, automatically prompt for
test times, record each measurement, and tell you the bes time
for sexual activity and the probability of conception. It will also
provide a detailed monthly report and corresponding pregnancy
preparation recommendations based on data such as
menstruation and hormone levels.
This device quantitatively detects the content of different substanc-
es in different samples by testing the reagents produced using the
double antibody sandwich method and nano-gold lateral immuno-
chromatographic assays. The reagents are the mouse anti-LH2
monoclonal antibody and goat anti-mouse IgG polyclonal antibody
coated and paired at the detection and quality control lines on the
nitrocellulose membrane through making a mouse anti-LH1
monoclonal antibody coupled to colloidal gold as a chromogenic
marker. During the detection, if human luteinizing hormone exists in
the sample, it reacts first with the gold-labeled antibody conjugate
to form gold-labeled mouse anti- LH1 + LH, which is chromato-
graphed under the capillary effect. The gold - labeled mouse
anti- LH1 + LH and mouse anti- LH2 form gold-labeled mouse
anti-LH1+LH+ mouse anti-LH2 compound in the test area ( T line ),
and a burgundy red strip appears. As the LH content increases, the
color of the strip also becomes darker. The remaining part
continues on into the control area ( line C ) to form gold-labeled
mouse anti-LH1+goat anti-mouse IgG compound, and a burgundy
red strip appears. Collecting sufficient samples to be tested ensures
the effectiveness of the regent, and it is inserted into the lateral
immunochromatographic analysis. The signal change of the regent
test card is detected by the optical detector of the analyzer, and the
content of the substance is calculated based on standard curves.
monitor.
3.How does the app get the information about my menstrual
cycle?
The app calculates user menstrual cycles intelligently based on
user selections and descriptions, and measured hormone data.
4.Is data for each test automatically synced to the app? Can
data for multiple measurements be synced to the device at the
same time?
If your device is connected to mobile Bluetooth, the data will be
synced to the app after each test. If you forget to sync the
data once, the next time Bluetooth is turned on and the
app is re-connected to the device, the data for multiple
measurements will be automatically synced.
5.Is Internet or Wi-Fi needed to run the app?
It is better to connect to the network to run the app, in order to
sync your test data to the cloud system to more conveniently
manage your historical data.
6.How many tests can be stored in the app?
It can store data on 50 tests. If there are more than 50 tests
data without synchronization to app, the oldest data will be
replaced to newest data.
7.Will tests conducted in different time zones affect the
calculation results?
It won't affect the calculation results, but will affect the test
time. Once the mobile app is connected to the device after
changing the time zone, the time zone information is automati-
cally synched to the device.
8.If I change my phone, will the previous test data be lost ? Will
it affect my test results?
Previous data will not be lost, and it will not affect your test
results. Once your phone is connected to the network, the test
results will be encrypted and synchronously transmitted to your
exclusive cloud server. After you change your phone and log
into your account again, the data will be synchronized to your
phone.
If the temperature inside the device is higher than 70℃，the
device will be shutdown. When the temperature is lower than
40℃，please press open button to reopen the device.
.
Sorry， it can only be used by one user.
Colloidal Gold Immunochromatographic
Test Strip Monitor
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or
transmitter.
Note of FCC:
For More information,Please contact [e-mail]
Registrant: Shenzhen Zaitian Yifang Technology Co., Ltd.
Enterprise address: 606Q, 6F, Xuyuan Building,
No.5003 Long Gang Road, Nanlian Long Gang District,
Shenzhen Guangdong, China
Manufacturer: Shenzhen Ruizhigu Medical Technology Co.,
Ltd.
Production address: B101, 201, 301, 302, 303, 2402,
Smart Home Phase II, No. 76 Bao He Avenue, Bao Long
Community,
Bao Long Street, Long Gang District, Shenzhen Guang-
dong, China
MADE IN CHINA