User's Guide

ManualsBrandsseeed studio ManualsElectronicsAir Temperature and Humidity Sensor

Quick Start for SenseCAP

S210X Sensors

1 2

3 4

Product Catalog & User Guide

Please read the product catalog and user guide carefully before using the

product. You can scan the QR Code below to read and download the

documents. Or visit the link: sensecap-docs.seeed.cc

Warranty Police

Warranty period for Sensors is 12 months as of the date of delivery. Please refer

to this link for detailed information:

seeedstudio.com/get_help/ReturnsRefund

Support

Note: During the installation, ensure that the waterproof washer is properly

installed and the screws are locked; otherwise, water will ﬂow into the device.

Note: The sensor and PCBA

are connected by wire, and the

abnormal contact of the sensor

will be caused by strong pull.

Note: Do not invert the

positive and negative

batteries. Otherwise, short

circuit may occur and the

device may be damaged.

Force bearingpoint

One hand holds the clasp while the other holds the device.

Pull outward with opposite force.

Frequency Explained

Replacing Battery

Installation Instructions

Sensors are manufactured to support universal frequency plan from

902MHz ~928MHz in one SKU.

The f requency plan setting is none by default and it will not transmit RF

signal until it has been set by App via Bluetooth at the ﬁrst power up. And

it can be change to other frequency plan at any time.

Download SenseCAP Mate App

SenseCAP Mate provides a simple way to experience sensors.

① Pair via Bluetooth

② Conﬁgure device parameter

③ Check device status and data

④ Upgrade the ﬁrmware via OTA

Contact Seeed technical support at sensecap@seeed.cc.

Please kindly provide the following information:

① Product name, model, and EUI

② Location of the installation site

③ Contact information of a technical person who can provide further

information on the problem

For iOS, please search for “SenseCAP Mate” at the App Store to

download.

You can also scan the QR Codes below to download the App in

Android or iOS version.

Documents

Install the bracket

Mount on the pole

Mount on the wall

Android iOS

3*PWM3.0x20.0MM

Battery

Metal ferrule

Summary of content (2 pages)

PAGE 1
Quick Start for SenseCAP S210X Sensors Product Catalog & User Guide Frequency Explained Please read the product catalog and user guide carefully before using the product. You can scan the QR Code below to read and download the documents. Or visit the link: sensecap-docs.seeed.cc Sensors are manufactured to support universal frequency plan from 902MHz ~928MHz in one SKU.
PAGE 2
FCC Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.