User's Manual

ManualsBrandsSeeed Studio ManualsElectronicsODYSSEY-X86i51135

ODYSSEY X86 User Manual

Getting Started with ODYSSEY X86

ODYSSEY X86 v2 board powered by the latest Intel® Core™ 11th Gen. processor

and Intel® UHD Graphics or Intel® Iris Xe Graphics, which delivers high CPU and

AI performance for various applications. It has two high-speed 2.5-Gigabit

Ethernet ports and supports hybrid connectivity including, BLE and WIFI.

Meanwhile.

Features

 Powered by the latest 11th Gen Intel® Core™ CPU and Intel® UHD Graphics

or Intel® Iris Xe Graphics.

 Rich peripherals including dual® 2.5-Gigabit Ethernet ports, USB 3.2 Type-A

port, USB 2.0 Type-A port, HDMI port and DP port

Summary of content (9 pages)

PAGE 1
ODYSSEY X86 User Manual Getting Started with ODYSSEY X86 ODYSSEY X86 v2 board powered by the latest Intel® Core™ 11th Gen. processor and Intel® UHD Graphics or Intel® Iris Xe Graphics, which delivers high CPU and AI performance for various applications. It has two high-speed 2.5-Gigabit Ethernet ports and supports hybrid connectivity including, BLE and WIFI. Meanwhile. Features  Powered by the latest 11th Gen Intel® Core™ CPU and Intel® UHD Graphics or Intel® Iris Xe Graphics.
PAGE 2
 Support hybrid connectivity including BLE and WIFI  Dual SATA III 6.0 Gbps data connectors for 3.5"/2.5" SATA hard disk drives with enough space inside the enclosure to store them both  M.
PAGE 3
Comparison Quick Start with ODYSSEY X86 If you want to get started with ODYSSEY X86 in the fastest and easiest way, you can follow the guide below. Hardware Required You need to prepare the following hardware before getting started with ODYSSEY X86。  ODYSSEY X86  Power Adapter(provided)  External monitor  HDMI/DP cable  Keyboard and Mouse Hardware Installation For this part, we will introduce how to install or replace some hardware inside ODYSSEY X86.
PAGE 4
Assembly Guide Manual attached at the end of this page to access to the main board of ODYSSEY X86 before reading this part. DDR4 Installation DDR4-3200MT/s has been pre-installed for all versions of ODYSSEY X86 but you can also add a new DDR4 to the other channel or replace the pre-installed one with your own to expand memory. The dual-channel SO-DIMM slots support DDR43200MT/s up to 64GB in total. SSD Installation A NV Me SSD has been pre-installed for all versions of ODYSSEY X86, while, still, the M.
PAGE 5
WIFI Module Installation All versions of ODYSSEY X86 have installed 2230 Dual Band WIFI AX201 Module at M.2 E-Key 2242/2280(PCIe 3.0x4). If you want to replace the pre-installed WIFI Module, feel free to follow the steps below. Step 1. Remove the SSD from M.2 M-Key slot. Step 2. Take off the WIFI antenna cable and remove the pre-installed WIFI Module from M.2 E-Key.
PAGE 6
Step 3. Install the new WIFI Module and connect the WIFI antenna cable back to it. Step 4. Install the SSD back to M.2 M-Key. Hardware Connection For this part, we will introduce the interface connection of ODYSSEY X86. There are two versions of ODYSSEY X86. Please note that different versions might have different interfaces. Display Connection There are three methods for ODYSSEY X86 to connect to a display while the third method is only for High-performing versions. Method 1. HDMI Port、 Method 2.
PAGE 7
one USB 2.0 port for Basic versions while there are one USB 3.2 port and two USB 2.0 ports for High-performing versions. Basic version Audio Connection For Basic versions, the Audio Jack is on the left side I/O panel, while, for Highperforming versions, it's on the right side I/O panel for High-performing versions Power Connection There are two methods to power up ODYSSEY X86, and the second one is only for High-performing versions. Method 1.
PAGE 8
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 9
longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Any company of the host device which install this modular with limit modular approval should perform the test of radiated emission and spurious emission according to FCC part 15C: 15.247 and 15.407 requirement, only if the test result comply with FCC part 15.