Specs

ManualsBrandsSeeburg Acoustic Line ManualsActive Full-Range PA SpeakersActive High Power Line Array System

PRODUCT SPECIFICATIONS

Digitally Powered Cylindric Wave Radiator GL 24 dp

Active high-performance line array systems

for optimised speech and music reproduc-

tion in acoustically challenging rooms. The

precise, broadband sound bundling to a

nominal 20° vertical dispersion is achieved

through the acoustic coupling of two slightly

curved line arrays, arranged one behind the

other within the cabinet. This innovative

arrangement is complemented by the horn

guide in the high frequency range to ensure

an exceptionally homogeneous and symme-

trical 100° horizontal dispersion. The GL 24

systems are particularly suitable for indivi-

dual applications up to a distance of 25 met-

res, and can also be used as a downﬁll under

the GL 16i . The integrated digital ampliﬁer

technology provides 2 x 800 Watt and DSP

control.

Flying bracket.

Integrated ﬁttings for easy connection.

Speaker Components

6 x 6,5“ Nd / 24 x 1“ Nd Tweeter

Description

Digitally Powered Cylindric Wave Radiator

Amp Power

2 x 800 W AES biamped / 110-230 V

Rated Current

1,8 A @ 230 V

SPL Peak @ 1 m

>130 dB

Max. Input Signal

25 dBu

DSP

HDLM FPGA Processing 32 bit floating point

AD / DA

24 bit / 96 kHz

Latency

0,8 ms (analog in to analog out)

Usable Range

80 Hz - 20 kHz (-6 dB)

Tuning Frequency excursion minimum

90 Hz

X-Overpoint acoustical

Depends on preset

Coverage horizontal / vertical

100° x 20°

Mechanical Splay Angle

13°

Connectors

Neutrik XLR in/out

Neutrik PowerCon in/out

Neutrik Speakon NL4MP out

Handles

2 x

Rigging / Fittings

9 x M10

35 mm pole mount

Weight

22,0 kg

Size height x width x depth

106,0 x 19,0 x 34,3 (24,5) cm

Order No.

00520/dp

Summary of content (6 pages)

PAGE 1
Digitally Powered Cylindric Wave Radiator GL 24 dp Active high-performance line array systems for optimised speech and music reproduction in acoustically challenging rooms. The precise, broadband sound bundling to a nominal 20° vertical dispersion is achieved through the acoustic coupling of two slightly curved line arrays, arranged one behind the other within the cabinet.
PAGE 2
DIMENSIONS 190 245 M10 1060 M10 M10 M10 343 M10 coverage patterns GL 24 horizontal - 2D Directivity Plot 100° horizontal dispersion for good performance in wide venues. 2 GL 24 dp GL 24 vertikal - 2D Directivity Plot The j-curving leads to an unsymmetrical vertical dispersion, narrower in th upper section for long throw and wider in the lower section for near field.
PAGE 3
AMR® Principle AMR® Principle.* The AMR horn contains integrated channels which allow the sound waves generated by the low-mid speakers mounted behind the horn to pass through. For sound waves in the frequency range generated by the 1“ HF driver, these channels behave as if they were sealed due to the air mass inside the channels acting as a reflector (AMR = Air Mass Reflection).
PAGE 4
digitally powered The GL 24 dp features integrated digital amplifier High-grade electronic components from the industrial sector electronics with a DSP controller. Various factory- and a first-class circuit design ensure excellent audio quality configured presets and volume settings can be selected. with low distortion and a minimal noise floor.
PAGE 5
ACCESSORIES GL 24 dp Flying Cradle Doughty Trigger Clamp for one unit GL 24 or for up to 6 units GL 16 for flying brackets, SWL 200 kg Order No. 01354 Order No. 01222 Flying Bracket Ring Screw for GL 24 incl. accessories: 4 x M10 x 20 handle screws M10– DIN 580, black zinced Order No. 73700 Order No. 01352/GL24/set Handle Screw TV Spigot for flying brackets, adjustable, M10 x 20 10 mm internal thread, 28 mm ø Order No. 08375/20 Order No.
PAGE 6
www.seeburg.net ACCESSORIES GL 24 dp Wall Mount Bag for one single GL 16 / GL 24 / A 2 / A 3 / L-Series for one unit GL 24 Order No. 01233 Order No. 03034 Spacer Rain Cover for wall mount (03034) polyurea coated for GL 24 Order No. 01233/outdoor Order No. 03034/spc Wall Mount for U-brackets, 40 kg max., incl. screws (M10 x 70 mm socket head screw, M10 hex lock nut and flat washer) Stretch Cover for 15“ speakers Order No. 08130/F/400 for GL 24 / GL 24 j Order No. 01233 Speaker Stand Incl.