Secustone Store Smart Lock Manual Electronic Keypad Deadbolt Lock Other Products Customer Service Support: E-MAIL:service@secustone.
PREFACE Please read this manual before installing. Any question, please contact our customer service. WARNING: This Manufacturer advises that no lock can provide complete security by itself. This lock may be defeated by forcible or technical means, or evaded by entry elsewhere on the property. No lock can substitute for caution, awareness of your environment, and common sense. In order to enhance security and reduce risk, you should consult a qualified locksmith or other security professional.
INTRODUCTION Package J H Product Specifications N 1 2 3 4 5 6 7 8 9 * 0 # I DY001 L E D + M K C A + Item No. B F G Part Description Quantity A Key 3 B Keypad 1 C Double-screw Bolt 2 Communication mode Bluetooth 4.1ble Unlocking way Bluetooth, Passcode, Key, IC Card D Latch 1 Support System Android 4.3 / IOS 7.0 above E Wood Screws 4 F Strike Plate 1 G Box Striking Plate 1 Unlock time ≈ 1.
INSTALLATION MANUAL Performance 1.Smarter and Safer Smart Lock Front Door set out to provide extra home security with keyless codes, Bluetooth unlock, anti-peep password and auto lock (5-200s) to keep your house safe and sound. Note: Install and test lock with door open to avoid being locked out 2.Real Time Record Through Keyless Door Locks for Homes APP, you could check the unlocking records and incorrect password records from the Admin account in real time.
Hold the right part of the lock tongue with your right hand and turn the left iron piece counter clockwise (about 15 degrees) with your left hand. When the rectangular position of the 2-3/8”(60mm) tick mark changes from convex to concave (as shown), slowly extend the locking latch, and then turn clockwise the inside of the locking latch back to the rectangular position of 2-3/4”(70mm) scale. 3.Install Lock 1) Install Latch Note:Need to keep this way up when inserting the latch. 2.
C.Insert the plastic lock groove and the strike plate into door jamb tighten with wood screws. 4) Identify Door Handing 3) Install Keypad The door is "Left-handle" if the hinges are on the left side of the door. Install double-screw bolt into keypad inner plate. Whereas the door is "Right-handle" if the hinges are one the right side of the door.
6) Adjust the Toggle Button of the Cover Connect IC wire to the white port carefully. Note:Ensure the thumb turn piece and the toggle button of the cover in right way. L R L To install the lock for left side handling, ensure the toggle button on the back cover assembly is set to "L". L R Use 2 short flat screw tighten the receiver module inner battery groove. Longest flat screw connect the receiver module with door.
3.Match the Lock to the Application SMART INSTRUCTION When matching, follow the prompt steps of the program, you need to touch the screen after installing the lock and installing the battery, match the blue icon lock , and set the name for the lock. Pairing Lock to Phone App 1.Download the App ''TTLock'' Android Mobile Phone--Search ''TTLock'' from Google Play. Apple Mobile Phone--please search ''TTLock'' from App Store.
2.Lock/Unlock Press for unlock, long press for lock. It requires your smart phone and Bluetooth lock to be within a certain range. Note: If you want remote control, you need to connect to the gateway. 3.Send ekey You can add another account on the app. This way your family can also control the Bluetooth lock via the app. Support authorized users to Limit time, Permanent, One-time, Recurring control smart lock.
4.Generate Passcode Generate or customize the passcode of the Bluetooth lock.Generate or customize permanent, one-time, time-limited, recurring passcode. Note: Generate the passcode to clear the passcode that Bluetooth lock stored by "Erase". Once used, in addition to the admin passcode, other passcode will be cleared. 6.Passcodes It records all passwords stored by the Bluetooth lock you had set. In addition, it can also reset, generate, upload passwords. 5.
7.Cards 9.Records 8.Authorized Admin 10.Settings It records all cards stored by the Bluetooth lock you had set. In addition, it can also add cards, clear cards. Authorized admin can add authorized administrators. The authorized administrator has the same functions as the administrator, except for the authorized function. (17) It records the time and manner of the smart lock when someone opening or closing. Manage your Bluetooth lock safely and efficiently.
You can find the information about the lock such as battery power, admin passcode. Note:The admin passcode will not be cleared when erase passcode. Settings Basics Basics Lock Number Unlock Remotely Off 180s Auto Lock MAC/ID 11.Remote Control Remote control support needs an extra additional Wi-Fi Gateway. Match the gateway, smart phone, app then the smart lock can support remote control lock.
G1(Wi-Fi) G2(Wi-Fi) G3(Wired) G4(4G) (21) (22)
MATCH the TTLOCK APP to the ALEXA APP After setting up to the gateway, authorize the TTLock app in the Alexa app and login to the TTLock account to enable remote unlock and voice remote unlock. Select ''Skill & Games'' , input ''TTLock'' in the search bar, click ''ENABLE TO USE'' . And input TTLock account and password to finish the authorization. Note: If shows "Invalid Account and Password", please add "+1" at front of the account.
(25) (26)
Press locks option,choose the lock you paired. Click the icon in the upper right corner and slide the icon button of ''unlock by voice'' and ''unlock by voice''.
Lock/Unlock OPERATION INSTRUCTIONS keep the door opened while programming to avoid being locking out accidentally. TT Lock Touch screen button 1 2 3 4 5 6 7 8 9 * 0 # Via Key: The package contains two keys that can be used directly through the keyhole. my Lock Via Keypad: Enter the passcode then press ''#''to unlock. Long press ''#'' and hold 2s for lock. Via APP: Touch to unlock, long press to lock.
Battery Power Runs Out 1 2 3 4 5 6 7 8 9 * 0 # FCC Statement: The smart lock sounds an alarm when the battery is low. You needed use Type-C USB supply power to the Lock then unlock. Changes or modifications not expressly approved by the party responsible for compliance could Unauthorized Attempts Alert Mode against harmful interference in a residential installation. This equipment generates uses and can void the user's authority to operate the equipment.