Installation Guide

ManualsBrandsSecurityMan ManualsElectricaliSecurity 4-Channal 480TVL Digital Wireless Indoor/Outdoor 1 Camera System Kit with Remote Viewing

DIGILCDNDVR2 Quick Start Guide (iPhone)

The SecurityMan DIGILCDNDVR2 is designed for quick and easy installation.

This guide will help you get your system connected to your mobile device

in 2 easy steps.

Step 1 HARDWARE

Step 2 INSTALL APP & SCAN QR CODE

1. Open the App Store on your mobile device. Then search for and install the “WatchBot” application developed by “Long Xu”. Once installed, tap on the

“WatchBot” icon (Fig. 2.1), select “+” to add a new device (Fig. 2.2) and then select the “Scan” option (Fig. 2.3).

Fig2.3

Fig2.1 Fig2.2

Connect the Ethernet

Cable to your Router

Connect

the Power

Attach

the Antenna

Attach the

Mounting Bracket

Power Button

Extend the Antenna

Insert SD Card

(not included)

Connect the Power

Adapter

Summary of content (4 pages)

PAGE 1
DIGILCDNDVR2 Quick Start Guide (iPhone) The SecurityMan DIGILCDNDVR2 is designed for quick and easy installation. This guide will help you get your system connected to your mobile device in 2 easy steps. Step 1 HARDWARE Power Button Extend the Antenna Attach the Antenna Connect the Power Insert SD Card (not included) Attach the Mounting Bracket Connect the Power Adapter Connect the Ethernet Cable to your Router Step 2 INSTALL APP & SCAN QR CODE 1. Open the App Store on your mobile device.
PAGE 2
. Aim your camera at the QR Code located on the bottom of the dock station (Fig. 2.4) so that the app can capture your Device ID. Create a System name (Fig. 2.5) and enter the Device Password that is associated with your system (Fig. 2.6). NOTE: The default password is 123456. Fig2.4 3. Fig2.5 Fig2.6 When you are done entering the Device Name and Password tap on “Save” (Fig. 2.7). Now select your device (Fig. 2.8) to bring up the live view screen (Fig. 2.9).
PAGE 3
DIGILCDNDVR2 Quick Start Guide (Android) The SecurityMan DIGILCDNDVR2 is designed for quick and easy installation. This guide will help you get your system connected to your mobile device in 2 easy steps. Step 1 HARDWARE Power Button Extend the Antenna Attach the Antenna Connect the Power Insert SD Card (not included) Attach the Mounting Bracket Connect the Power Adapter Connect the Ethernet Cable to your Router Step 2 INSTALL APP & SCAN QR CODE 1. Open the Play Store on your mobile device.
PAGE 4
2. Aim your camera at the QR Code located on the bottom of the dock station (Fig. 2.4) so that the app can capture your Device ID. Create a System name (Fig. 2.5) and enter the Device Password that is associated with your system (Fig. 2.6). NOTE: The default password is 123456. Fig2.4 3. Fig2.5 Fig2.6 When you are done entering the Device Name and Password tap on “Save” (Fig. 2.7). Now select your device (Fig. 2.8) to bring up the live view screen (Fig. 2.9). Fig2.7 Fig2.8 2 Fig2.