Spec Sheet

Securitron GL1

Electromechanical Gate Lock

Heavy Duty Gate Lock with One Ton of Holding Power

Works well on electrical and manually operated

indoor or outdoor gates where preload is a

concern. Ideal for swinging or sliding vehicle,

pedestrian, or stock gate access control.

Strength & Durability

• 2,000 lbs holding force

• Operates under preload up to 100 lbs

• Weather and Tamper resistant

Multiple Options Available

• Available in Fail Locked or Fail Safe Mode with optional

latch monitoring

• Acommodates a full mortise cylinder including SFIC for

higher security

• Available Flex-Mount Gate Lock Bracket Kits (FMK)

extend access control to gates and fences

Features & Benefits

• Automatic dual voltage – no field adjustment required

• Self-aligning receiver (+/- ½” horizontally) helps

compensate for gate misalignment and sag

• Covered by best-in-class MagnaCare lifetime replacement,

no-fault, no questions asked warranty

ESH-SEC-012-0418

PAGE 1
Securitron GL1 Electromechanical Gate Lock Heavy Duty Gate Lock with One Ton of Holding Power Works well on electrical and manually operated indoor or outdoor gates where preload is a concern. Ideal for swinging or sliding vehicle, pedestrian, or stock gate access control.
PAGE 2
Strong | Preload Capable | Flexible 2-11/16" [69mm] Specifications Features Dimensions Standard Features • 2-3/4"L x 7-1/4"W x 3-1/4"D Electrical • 12 Volts Initial (Peak): (~1.0 sec.) 2-1/8" [54mm] at 870 mA - Reduced: 290 mA • 24 Volts Initial (Peak): (~1.0 sec.