Spec Sheet

Securitron AQD4
Power Supply
The Securitron AQD4 Series of switching
power supplies are dual voltage, UL listed,
supervised units. These units are field selectable
with a dedicated battery charging circuit.
They provide 4 Amps at 12VDC or 24VDC
continuous, with up to 16 independently
controlled power limited outputs.
Product Features
All combinations of AQ power supplies
and distribution boards are UL listed
Dual voltage 12 or 24 VDC field
selectable continuous output
Up to 89% efficiency which results
in decreased operating costs and
lengthens the lifespan of electronics
Tolerates brownout or overvoltage
input ± 15% of nominal voltage
Thermal shutdown protection
with auto restart
Circuit breaker protects against
overcurrent and reverse battery faults
Dedicated battery charging circuit
prevents overvoltage on locking devices
Low battery cutoff at 9V at 12V or
18V at 24V
Available with a single relay fire trigger or
individually triggered relayed outputs
MagnaCare
®
lifetime replacement,
no fault warranty
Specification Data
Typical output: 12.5 / 25.0 VDC
Low noise design with ripple
as low as 96mV p-p
115 or 230 VAC input
Power supply outputs are
Class 2 power limited
Expandable up to 16 independently
controlled power limited outputs
Available with configurable access
control input/outputs with fire trigger
in either PTC or with fuse/dry contact
option, fire relay only, or configurable
outputs with fire relay input
LED indicators and form "C"
contacts for supervision
Supports up to two (2) sealed gel,
AGM or wet lead acid batteries
Dimensions: 14" x 14" x 4-3/4" enclosure
Operating Temp: -4 to +122F [-20 to +50C]
Shipping Weight: 12.7 lbs [5.76kg]
assaabloyesh.com | 800.626.7590 | 10027 S. 51
st
Street, Ste. 102 Phoenix, AZ 85044 USA
Copyright © 2018, Hanchett Entry Systems, Inc., an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Hanchett Entry Systems, Inc. is prohibited.
ESH-SEC-40-0818

Summary of content (1 pages)