Spec Sheet

AQD3-8C
Power Supply
The AQD3-8C power supply with battery charger/backup
is a dual voltage switching power supply that uses any AC
power source from 90-240VAC/43-63Hz to provide up to
3 Amps @ 12VDC or 1.5 Amps @ 24VDC total output.
FEATURES:
• Clean, steady, accurate power output for best performance of access control equipment
• Field-selectable dual voltage 3A/1.5A @ 12/24VDC
• Compact modules for smaller footprint
• Universal transformer compatible with most international power
• Works in AC brownout down to 60 VAC
• Faster battery recharging under full load
• Automatic low-battery disconnect prevents deep discharge, maintains battery life
• Self-resetting circuit breakers for common conditions including:
o Overcurrent
o Thermal runaway
o Reverse battery hookup
• Class 2 power limited output
• Eight (8) channel power distribution
o Power limited PTC protected outputs, each with a green status LED indicator
o Main power green/red LED indicates AC, DC, or Reversed DC input
o Main power/power pull to disconnect board from input power
• Fuse protected against surge for AC input and DC output
• SPDT Form C outputs for remote monitoring of:
o AC failure
o Low battery
• Made in USA
• MagnaCare Lifetime Replacement No Fault Warranty
• UL and ULC Listed