AVA INDOOR CAMERA Quick Start Guide POWERED BY
Getting to know the camera MICROPHONE LENS STATUS INDICATOR POWER OUTPUT STATUS INDICATOR RESET BUTTON + Flashing blue: the camera is on and ready for Wi-Fi connection SPEAKER + Steady blue: the camera is running properly + Steady red: the camera is starting + Flashing red: there is a network connection issue
What’s in the box? 1 INDOOR CAMERA 2 POWER ADAPTER AND MICRO USB CABLE 3 SCREWS & ANCHORS Installing a MicroSD card (optional) Open the side cover to insert a MicroSD card. The card will be formatted during the add camera process.
Powering the camera Connect the Micro USB end of the power cable to the camera and the USB end to the power adapter. If mounting, place the camera back onto the magnetic disc. Connect the power adapter to an AC power outlet to power up the camera. Connecting to the camera In the app, go to the Video or Settings > Video settings page and tap the circular “+” button to launch the camera installation wizard.
Do not place the camera in extremely hot, cold, dusty, or damp locations, and do not expose it to electromagnetic radiation. The operating temperature is 14° F to 104° F (-10° C to +40° C). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
