Installation Instructions

ManualsBrandsSECURAM ManualsElectronicsSECURAM Touch

SECURAM Touch

Model: SH-TB01

Doc.No.: SH-TB01-191011

Version No.: V1.00

Date：2019-10-11

Congratulations on your purchase of the SECURAM Touch, the smart fingerprint deadbolt lock.

1. Quick Tour of the Touch

 The Touch has 30 user capacity

o Each user can register 2 fingerprints

 Users can be set as Owners or Visitors

Owners can unlock using fingerprint or code

o Visitors can unlock using fingerprint or code, provided the Visitor switch is set to green

 The first user added is the Administrator/Owner

o Administrator/Owner can:

 can unlock using fingerprint or code

 manage all users

 access all programming menus

2. Installation:

Download the app on the App Store or Google Play Store and follow the instructions to install the

SECURAM Touch.

3. To open the lock with the default Administrator code:

For first use, enter 123456 +  button, to open the lock using the default Administrators code

Summary of content (9 pages)

PAGE 1
SECURAM Touch Model: SH-TB01 Doc.No.: SH-TB01-191011 Version No.: V1.00 Date：2019-10-11 Congratulations on your purchase of the SECURAM Touch, the smart fingerprint deadbolt lock. 1.
PAGE 2
4. Set Up: The easiest way to set up your SECURAM Touch is to follow the voice guidance.
PAGE 3
 Delete User press 3 o Delete User o Please login as Administrator – enter the Administrator/Owner code or fingerprint o Verified Successfully o Press 1 for Owners; 0 for Visitors  1 = Would you like to delete all owners?  Press   Owner(s) deleted successfully – All Owners will be deleted except for the Administrator / Owner  0 = Would you like to delete all visitors?  Press   Visitor(s) deleted successfully  Set Volume press 6 o Press 6 to adjust volume  Press 6 - Volume High  Press to con
PAGE 4
o When the prescribed re-lock time elapses, the system extends the lock bolt 5. Restricting Visitor Access The Visitor switch can be set to green or red by manually sliding the switch.   Green = all visitor access allowed Red = visitor access restricted, and upon entry of a visitor code or fingerprint, the lock will remain locked.  Voice: Visitor access restricted 6. Integrated door sensor The SECURAM Touch is equipped with an optional integrated door sensor to detect door open/closed position.
PAGE 5
7. Resetting to default The lock can be reset to default by accessing the reset button on the back of the interior assembly.
PAGE 6
Under a low battery condition, the SECURAM Touch will provide a low battery warning upon code or fingerprint entry. The lock will unlock with the voice warning “Low Battery”, and the low battery indicator flashes red. NOTE: Lock programming cannot be performed with a low battery. 11. External battery port In the event that a low battery has not been replaced and the batteries are completely dead, the external battery port can be used to power the lock to open.
PAGE 7
Safety instructions for batteries with battery products:  Use Two CR2 type batteries;  Non-rechargeable batteries cannot be charged;  The battery should be placed with the correct polarity (+, -);  The used battery should be taken out of the product;  The battery port must not be short-circuited;  When not in use for a long time, please remove the battery to prevent leakage;  Do not throw the battery into fire.  Do not discard used batteries.
PAGE 8
receipt of their safe lock. The Consumer Purchase Warranty Registration form is packaged with each product. 16. FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 9