Data Sheet

SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA, 92606
Copyright 2015 © SECO-LARM U.S.A, Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to
change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Phone: [phone] | [phone] Fax: [phone]
Website: www.seco-larm.com | Email: [e-mail]
PI-ST-2406Series.docx
Power Supply/Chargers
Features:
• Convert low-voltage AC input power to low-voltage
DC output power.
• Regulated and filtered output voltage.
• Short circuit protection.
• Thermal protection and compensation.
• Built-in backup battery charger.
• Switches automatically in case of power loss.
• Fused protection for battery charger.
• 2 LEDs to indicate AC power input and DC power
output status.
• Compatible with lead acid or gel-type rechargeable
battery.
• Re
verse polarity protected.
• Includes foam tape and battery terminals for easy
installation.
ST-1206-1.5AQ
ST-2406-3AQ
ST-2406-7AQ
ST-2406-2AQ
ST-2406-5AQ
ST-2406-10AQ
Specifications:
Model # DC Voltage
Current
(continuous)
Current
(peak)
Maximum Charge Current PCB Size
ST-1206-1.5AQ 6/12 1.5A 2.0A 6V =200mA, 12V = 400mA 2-78" x 2-1/4" x 1" (73 x 57 x 25 mm)
ST-2406-2AQ 6/12/24 1.5A 3.0A 6V =180mA, 12V = 350mA, 24v = 700mA 2-7/8" x 2-1/2" 1-3/8" (73 x 64 x 35 mm)
ST-2406-3AQ 6/12/24 2.5A 3.0A 6V =180mA, 12V = 350mA, 24v = 700mA 3-3/8" x 2-7/8" x 1-5/16" (81x 73 x 33 mm)
ST-2406-5AQ
6/12/24
4.0A
5.0A
6V =180mA, 12V = 350mA, 24v = 700mA
3-3/4" x 2-7/8" x 1-9/16" (95 x 73 x 40 mm)
ST-2406-7AQ 6/12/24 7.0A 7.5A 6V =180mA, 12V = 350mA, 24v = 700mA 5-1/2" x 5-1/8" x 2-11/64" (140 x 130 x 55 mm)
ST-2406-10AQ 6/12/24 9.0A 10.0A 6V =180mA, 12V = 350mA, 24v = 700mA 5-1/2" x 5-1/10" x 2" (140 x 130 x 51 mm)
Copyright 2008 SECO-LARM U.S.A., Inc. All rights Reserved.
The SECO-LARM policy is one of continual development. For that reason SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for
misprints.
ST-1206-1.5AQ
ST-2406-2AQ
1.5A continuous, 6/12 VDC
1.5A
continuous, 6/12/24 VDC
ST-2406-3AQ
2.5A continuous, 6/12/24 VDC
ST-2406-5AQ
4.0A continuous, 6/12/24 VDC
ST-2406-7AQ
7.0A continuous, 6/12/24 VDC
ST-2406-10AQ
9.0A continuous, 6/12/24 VDC
ST-2406-3AQ
ST-2406-7AQ