User Manual

ManualsBrandsSECO-LARM ManualsElectronicsPiezoelectric Pushbutton

Outdoor Piezoelectric

Request-to-Exit Pushbuttons

Manual

SD-6176-SSQ

Slimline plate, “TOUCH/EXIT”

SD-6176-SS1Q

Slimline plate, “EXIT/SALIDA”

SD-6176-SSVQ

Slimeline plate, manual override

SD-6276-SSQ

Single-gang plate, “TOUCH/EXIT”

SD-6276-SS1Q

Single-gang plate, “EXIT/SALIDA”

SD-6276-SSVQ

Single-gang plate, manual override

Piezoelectric push buttons for indoor

or outdoor use (IP65).

LED ring around button changes from

green to red or red to green when the

button is pressed.

Timed or toggle output.

Includes separate manual override

button in case power to piezoelectric

push button fails.

Relay rated 2A@30VDC with two

individually programmable outputs

(NO/NC).

Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.

Summary of content (4 pages)

PAGE 1
Outdoor Piezoelectric Request-to-Exit Pushbuttons Manual SD-6176-SSQ SD-6176-SS1Q SD-6176-SSVQ SD-6276-SSQ SD-6276-SS1Q SD-6276-SSVQ Slimline plate, “TOUCH/EXIT” Slimline plate, “EXIT/SALIDA” Slimeline plate, manual override Single-gang plate, “TOUCH/EXIT” Single-gang plate, “EXIT/SALIDA” Single-gang plate, manual override Piezoelectric push buttons for indoor or outdoor use (IP65). LED ring around button changes from green to red or red to green when the button is pressed. Timed or toggle output.
PAGE 2
ENFORCER Outdoor Piezoelectric Request to Exit Pushbutton Specifications: Operating voltage Current drain Contact rating Ring LED Colors reversible v a switch Standby Active Output time IP rating Operating temperature Plate material Single-Gang Single-Gang w/Manual Weight 12~24 VDC 100mA@12VDC 2A@30VDC or 0.5A@125VAC Red Green 1~30 s, Toggle IP65 32 ~158 F (0 ~70 C) Stainless steel 3.5-oz (99g) 4-oz (113g) Override Slimline Slimline w/Manual 2.6-oz (74g) 3.
PAGE 3
ENFORCER Outdoor Piezoelectric Request to Exit Pushbutton Wiring the Manual Override: SD-6176-SSVQ and SD-6276-SSVQ Only Connect the manual override button with the included wires. Wiring For N.O.: Connect the two wires between the NO and COM terminals of the override button and the Output 1 or 2 terminals on the switch. COM N.O. Wiring For N.C.: Connect the two wires between the NC and COM terminals of the override button and the Output 1 or 2 terminals on the switch. COM N.C. Notes a. b. c. d.
PAGE 4
ENFORCER Outdoor Piezoelectric Request to Exit Pushbutton Sample Installation: Electromagnetic Lock (Fail-Safe) with Strobe Light ENFORCER Electromagnetic Lock ENFORCER LED Strobe Light Also Available from SECO-LARM: Electromagnetic Locks Request-to-Exit Plates No-Touch Request-to-Exit RF Wireless Request-to-Exit WARRANTY This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for a period of one (1) year from the date of sale to the original cons