User Manual

RA-4961-PBQ

Wireless Pushbutton

Manual

•

For use with RA-4961 series receivers

• Up to 1,000ft (305m) transmission range*

• Easy installation

• Can be used as a wireless doorbell

* Transmission range will vary depending on installation and operating environment.

PAGE 1
® RA-4961-PBQ Wireless Pushbutton Manual • • • • For use with RA-4961 series receivers Up to 1,000ft (305m) transmission range* Easy installation Can be used as a wireless doorbell * Transmission range will vary depending on installation and operating environment.
PAGE 2
CBA Wireless Pushbutton Specifications: Model number Frequency Transmission range* Channels Power supply Current Standby draw Active Estimated battery life Low battery indicator IP rating Operating temperature Dimensions RA-4961-PBQ 914.8MHz Up to 1,000ft (305m) 1 CR2032 Battery (Included) 0.
PAGE 3
CBA Wireless Pushbutton Installation: 1. Remove the front cover of the pushbutton by inserting a paperclip in the notch at the top of the unit. Push down on the paperclip with force and pull the top of the front cover from the pushbutton. 2. Mount the pushbutton to a wall or other surface using screws (not included) through the two mounting holes. 3. Once the pushbutton has been mounted, snap the front cover onto the unit. Insert paperclip in notch Remove cover Mounting holes Pairing the Pushbutton: 1.
PAGE 4
CBA Wireless Pushbutton Also Available from SECO-LARM: Wireless Outdoor PIR Sensor Wireless Mailbox/Tilt Sensor Wireless Magnetic Contact RA-4961-DSQ RA-4961-MBQ RA-4961-MCQ Wireless Indoor PIR Sensor Wireless Alert System RA-4961-K1Q Wireless Vibrating Receiver RA-4961-VPQ RA-4961-PRQ FCC COMPLIANCE STATEMENT: FCC ID: YAHDCX-800 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.