PA-U0405-NULQ 4-Channel CCTV “Brick” Power Supply Manual
ENFORCER 4-Channel CCTV “Brick” Power Supply Introduction: The PA-U0405-NULQ is a 4-channel 5-Amp power supply. While normally used in CCTV installations, it is suitable for a wide variety of both CCTV and access control applications. It features adjustable output voltage and built-in 6.8-Amp overcurrent protection. Features: 4-Channel 5-Amp power distribution Universal input voltage: 100~240 VAC Adjustable output voltage: 12~13.8 VDC Built-in 6.
ENFORCER 4-Channel CCTV “Brick” Power Supply Installation: 1. 2. 3. Find a suitable location to install the power supply. The power supply should be installed out of sight, and in a place protected from weather and high humidity. The power supply must have adequate ventilation. Insufficient ventilation may cause overheating and damage could result. Attach the power supply to a wall or desk using the included mounting bracket.
ENFORCER 4-Channel CCTV “Brick” Power Supply Troubleshooting: Camera will not turn on No output power from power supply Make sure that all wires are connected securely and that the polarity is correct Check to see that the main power cable is securely connected to the AC wall socket Make sure that the AC wall socket is powered Check LED indicators on power supply to ensure that input power is being received Check the total supply current for all connected device does not exceed 5A Also Availab