Specifications

ManualsBrandsSECO-LARM ManualsAV extendersMVE-AH010Q

Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.

MVE-AH010Q

Extender for HDMI Over Dual Cat5e/6

Manual

 Extend HDMI over two Cat5e/6 cables

 Supports resolutions from 480i to 1080p with zero signal loss

 Transmits up to 197ft (60m) at 1080p over two Cat6 cables

 Plug and play operation – comes as a complete set

Summary of content (4 pages)

PAGE 1
MVE-AH010Q Extender for HDMI Over Dual Cat5e/6 Manual     Extend HDMI over two Cat5e/6 cables Supports resolutions from 480i to 1080p with zero signal loss Transmits up to 197ft (60m) at 1080p over two Cat6 cables Plug and play operation – comes as a complete set Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.
PAGE 2
ENFORCER Extender for HDMI over Dual Cat5e/6 Introduction: The ENFORCER HDMI Extender over Cat5e/6 extends the range of HDMI by using a transmitter and an active receiver to send video and audio over two Cat5e/6 cables. HDMI Formats as high as 1080p can be transmitted up to 197ft (60m) between the two units with zero signal loss. Features:  Signal Strength –Transmitter ensures that the signal strength will remain strong over the length of the cable.
PAGE 3
ENFORCER Extender for HDMI over Dual Cat5e/6 Overview: Back 5VDC Power input Status LEDs Cat5e/6 Ports HDMI Output Left Top Right (Receiver shown) Two Cat5e/6 cables are required. Please use T568-B wiring standard. Installation: 1. Determine the locations where the HDMI to Cat5e/6 units will be placed as well as how much Cat5e/6 cable will be necessary. 2. Connect the HDMI to cable to both the transmitter and source device. 3. Connect the HDMI cable to both the receiver and display. 4.
PAGE 4
ENFORCER Extender for HDMI over Dual Cat5e/6 Troubleshooting:     HDMI Device does not function correctly     Reduce the resolution of the source device Turn off deep color Use T568B wiring standard Make sure the Cat5e/6 cables are connected to the correct ports, and not to opposite ports Use solid core cable instead of stranded core cable Make sure the HDMI input device is turned on Make sure the HDMI output device is turned on Test the Cat5e/6 cable between the receiver and transmitter to mak