Installation Template

MAGNET

7⁄” (180mm)

12VDC

Red

White

Green

Black

24VDC

Red

White

Green

Black

IMPORTANT: The mounting holes must be precisely positioned

IMPORTANT:

Before applying

power, check the wire connections.

Incorrect connections may result in

a burned-out electromagnet.

Damage caused by improper

connection will void warranty.

Drill ⁄” (9mm) hole for blind nut

MOUNTING TEMPLATE FOR

ELECTROMAGNETIC GATE LOCK

E-942FC-600 Face-mount only

E-946FC-600Q Face and surface-mount

E-942FC-1300_mounting_template.ai

FACE MOUNT TEMPLATE

PAGE 1
MOUNTING TEMPLATE FOR ELECTROMAGNETIC GATE LOCK E-942FC-600 E-946FC-600Q Face-mount only Face and surface-mount IMPORTANT: The mounting holes must be precisely positioned 71⁄16” (180mm) Drill 3⁄8” (9mm) hole for blind nut MAGNET IMPORTANT: Before applying power, check the wire connections. Incorrect connections may result in a burned-out electromagnet. Damage caused by improper connection will void warranty.
PAGE 2
MOUNTING TEMPLATE FOR ELECTROMAGNETIC GATE LOCK E-942FC-600 E-946FC-600Q Face-mount only Face and surface-mount Place against door header Drill 3⁄8” (9mm) hole for blind nut 71⁄16” (180mm) MAGNET Fold along dotted line. Drill 3⁄8” (9mm) hole for armature screw Drill ¼” (6mm) hole for guide pins ARMATURE PLATE Place against door edge SURFACE MOUNT TEMPLATE E-942FC-600_mounting_template.