Data Sheet

DA-600Q
DA-600PQ
DA-1K2Q
DA-1K2P
Holding force (per door)
600-lb (272kg)
1,200-lb (545kg)
Operating Voltage
12 or 24 VDC ±10%
Current Draw
12VDC
500mA
24VDC
250mA
Bond sensor relay
3A@12VDC
Operating temperature
14°~131° F (-10°~55° C)
Weight
9-lb (4kg)
21-lb (10kg)
Bond Sensor relay
•
•
Status LEDs
•
•
Double-Door Electromagnetic Locks
E-941DA-600Q 600-lb Holding Forcer per door, UL Listed
E-941DA-600PQ 600-lb Holding Force per door, with Bond Sensors, LEDs, UL Listed
E-941DA-1K2Q 1,200-lb Holding Force per door, UL Listed
E-941DA-1K2P 1,200-lb Holding Force per door, with Bond Sensors, LEDs, UL Listed
• Anodized aluminum housing (US 28)
• 12 or 24VDC (selectable)
• No residual magnetism
• MOV surge protection
• Adjustable mounting bracket
• Complete mounting hardware for typical installations
• “L” bracket and “Z” brackets available for easy mounting
• Detachable faceplate.
E-941DA-600PQ and E-941DA-1K2P feature:
• Built-in dual-colored status LEDs and bond sensors
to show locking status of each door
Green
Door is closed and locked
Red
Door not closed and/or locked
Off
Door in use / No power
• Bond sensor relay: 3A@12VDC
Features:
Specifications:
Complete line of “Z”,”L” and
specialty mounting brackets
available:
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Copyright 2015 © SECO-LARM U.S.A, Inc. All rights reserved.
All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Phone: [phone] | [phone] Fax: [phone]
Website: www.seco-larm.com | Email: [e-mail]
Pi-E-941-DA
_151007.docx
E-941DA-600Q
(shown)
E-941DA-1K2P
(shown)
Magnet Dimensions:
19
11
/
16
” x 1
5
/
8
” x 1”
(500 x 42 x 25 mm)
Magnet Dimensions:
21” x 2
5
/
8
” x 1
5
/
8
”
(536 x 67 x 42 mm)
E-941S-1K2/ZQ
(shown)