Data Sheet

SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Copyright 2016 © SECO-LARM U.S.A., Inc. All rights reserved.
All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Phone: [phone] | [phone] Fax: [phone]
Website: www.seco-larm.com Email: [e-mail]
PI_AS-6111Q_160128.doc
Features:
AS-6111Q Motion Entry Alert
Specifications:
A simple to install audible motion alert for
indoor use—no need for any wiring. The
sensor is perfect as a door annunciator or for
monitoring passageways in a wide range of
home, office, and commercial applications.
office, and commercial applications .
*IMPORTANT: AS-6111Q is designed to detect changes in visible light. Not for use in total
darkness or facing a strong light.
Motion Entry Alert
 Mount next to a door or other entry point to alert when
someone enters or exits
 Provides an audible alert (doorbell sound) when triggered
 Sounds for approximately 4 seconds or for as long as the
sensor detects changes in visible light
 CDS sensor operates by detecting sudden changes in
visible light*
 Sensor range 10ft (3m)
 Battery operated (3 AAA batteries, not included)
 Designed for motion alerts only
 Low current drain (0.05mA standby)
Additional Products:
Wireless Alert System
RA-4961-K1Q
Full line of accessories for
RA-4961-K1Q
Auto Voice Reminder
AS-1511
Motion Entry Alert
AS-6111Q
Power
1.5VDC AAA batteries x3 (not included)
Current
Standby
Under 0.05mA@4.5VDC
Active
Under 85mA@4.5VDC
Low battery indicators
Device will repeatedly activate
Input signal
CDS sensor
Output signal
Doorbell sound
Sensor range
10ft (3m) at 20”~40” (0.5~1m) height
Material
ABS plastic, white
Dimensions (with bracket)
3
3
/
8
”x3
3
/
8
”x2” (85x85x50mm)
Weight
3-oz (84g)