Model：LTE-A FCC ID:2A57XLTE-A Cell Phone Signal Booster User Guide 1
TABLE OF CONTENTS The preface...................................................................................................................... 3 How the Cell Phone Signal Booster works ................................................................ 3 Mobile phone Signal Booster self oscillating signal ................................................... 3 How to avoid the mobile phones Signal Booster vibration signal............................... 4 What does the product contain .......................
The preface We know that reading manuals is not fun. But we promise it will be worth it. We have helped hundreds of customers install signal amplifiers to enhance their signals, and in the process have compiled the lessons learned and problems encountered by customers during their installation in this manual. Read before installing to avoid the most common wrong installation and make sure your system works as well as possible.
shock signal, which is harmful, affecting normal communication and interfering with the base station. How to avoid the mobile phones Signal Booster vibration signal As can be seen from the above description, the distance between the outdoor antenna and the indoor antenna is too close to the cause of the amplifier oscillation signal. For the wireless amplifier, it is necessary to ensure that the distance between the outdoor antenna and the indoor antenna is long enough.
What does the product contain The signal booster system consists of the following parts (1) A host of signal booster. (2) An outdoor antenna. (3) An indoor antenna. (4) One power adapter. (5) One low loss coaxial cable. (6) One accessory package (fixed antenna and cable accessories). Note: In order to ensure the stability of the equipment, it is forbidden to power on the mainframe (the port of the mainframe is not connected to the antenna).
NOTE: With a directional antenna (outside or inside) kit, the direction of the directional antenna should not be "toward" another antenna. Tools Required Overview of installation process (1) Please read this User Manual, read from beginning to end. (2) Find the best location and direction of outdoor signals. This step is the most time-consuming, but it's worth the effort. Doing this well will greatly help amplifier system performance. (3) Install the outdoor antenna at the position determined in step 2.
(6) Cable layout. (7) Optimization of mainframe power test. Detailed installation Step1: Find the location where the received signal is strongest Using your cell phone, locate the location where the outdoor signal is strongest and use it to install an outdoor antenna. In general, the area facing the base station is the best signal. To find the location of your carrier's nearest cell tower, head over to www.antennasearch.com.
indoor coverage will be limited. Putting your phone in Field Test mode will also indicate what level of decibels (dB) your phone is currently receiving. Decibels are measured in the negatives, and a score closer to zero indicates you have a better signal. A signal of -120 dB indicates you have no service, while a score of about -50 dB means you have excellent signal strength. For specific dB signal measurements, use the methods below. • Apple iPhones: Dial *3001#12345#* and press Call.
location of your carrier’s closest cell tower, go to www.antennasearch.com. Ensure that the mounting area has at least a 3-ft radius clear of obstructions and other radiating elements and orient the antenna with the drip hole at the bottom. Once you have identified your install location, assemble the u-bolt, bracket, nuts and washers onto a pole or pipe as shown in the illustration. Keep the connections loose enough to allow the antenna to rotate until the optimum direction is found.
Option B:Yagi Antenna 10
Option C:Panel Antenna Step 3: Install an indoor antenna Indoor antenna has right Angle antenna, panel antenna or ceiling antenna, buy different packages with different indoor antenna. Option A: Right Angle Antenna Installation steps (1) the whip antenna is connected to the turbocharger "INDOOR" port. (2) Place the host with the right Angle antenna in the area where the signal is weak.
Note: the right Angle antenna should be oriented perpendicular to the ground, whether the mainframe is flat or mounted on a wall Option B: Panel Antenna Installation steps (1) Press the antenna fixing plate on the wall of the position of the indoor antenna to be installed, and mark the position of the screw hole. (2) Drilling holes at the mark on the wall with drill bit, and fixing the antenna fixing plate with self-tapping screw. (3) Fix the antenna firmly on the mounting plate.
Option C: Top Suction Antenna Installation steps (1) Drill a hole 20mm in diameter on the ceiling. The maximum thickness of the ceiling should be 30mm. (2) Unscrew the fixing nut from the antenna, put the antenna cable into the hole, and use the fixing nut to screw down the fixing antenna through the cable. (3) Connect the indoor antenna to the port marked indoor on the booster. (4) tighten the antenna fixing nut. Note: The ceiling antenna is suitable for 180 degree coverage in the center position.
Step 4: Install the host The main engine must be installed in the indoor area. Changes in air humidity and temperature may affect the reliability of the equipment. Can not be installed in places exposed to direct sunlight and rain.The host machine is suitable for horizontal or wall-mounted installation, and can be placed in a suitable place. Wall Mounting (1) select the appropriate installation wall. (2) Install the host machine on the wall manually, and mark the location of the screw hole on the wall.
Step 5: Cable layout After the indoor and outdoor antenna and the main machine are installed and fixed, connect the antenna with the port of the main machine by cable. The distance between the port of the main machine and the indoor and outdoor antenna should be wired in the shortest way. The steps are as follows (1) Disassemble the cable package and place it so that it can bend naturally and smoothly.
and the INDOOR antenna is connected to the host "INDOOR" port. The host port Instructions DC12V Connect the power adapter OUTDOOR Connect the outdoor antenna INDOOR Connect the Indoor Antenna Interface specification Power on the main engine when the check is complete. After connecting the power supply, the green light of ISO and RUN of the host machine is always on (when the outdoor signal is strong, the AGC light is on).
(2) Increase the distance between outdoor and indoor antennas. Note: (1) The signal enhancer can only work at the correct frequency, so please make sure that your mobile phone frequency band is the same as the signal enhancer frequency. (2) Signal enhancer only makes weak signals stronger. It can't produce a signal. This means that if the outside antenna doesn't pick up any signal, it won't work. (3) The antenna must be connected first, and then the power supply; Otherwise you could damage the amplifier.
(4) Replace the installation position of the outdoor antenna. (5) Restart the host. Fault 2: Main engine indicator light is not on solution： (1) Check the power supply. (2) Recharge the adapter. Fault 3: Indicator light is normal, but the signal strength is unchanged solution： (1) Check whether indoor and outdoor antennas are installed in reverse. (2)Check whether the receiving antenna is damaged, and replace it if necessary.
B. AGC indicator light is not on, and there are only signals below four grids in the signal grid. Reason: Weak spatial signal. solution: Find the location of strong signal again and install the outdoor antenna. Kitting Information By default, the outdoor antenna is shipped with the Yagi Antenna, and the indoor antenna is matched with the Right Antenna. Component Outdoor Antenna Outdoor Cable Indoor Antenna Indoor Cable Description Gain/Loss Log Periodic Antenna 7.
instruction for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC RF EXPOSURE STATEMENT The device is compliance with RF exposure limits. The minimum distance from body to use the device is 20 CM. Le present appareil est conforme aux conformite ou aux limites d'intensite de champ RF. La distance minimale du corps a utiliser le dispositif est de 20сM.
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.
WARRANTY PRODUCT WARRANTY 30-Day Money-Back: All SEAZOU products are protected by a 30-day moneyback guarantee. If for any reason the performance of any product is not acceptable, the product may be returned to the reseller with a dated proof of purchase.2-Year Warranty SEAZOU signal boosters and kits are warranted for 2years.
