AV-RFM-01 Radio Frequency Module Product Documentation
1.0 Introduction The AV-RFM-01 is a wireless communication module which operates in the 2.4GHz ISM band. It is designed to provide the radio interface for Sealite products to be controlled wirelessly using the AvMesh TM network. The AV-RFM-01 is to be used in Sealite products only and is not for sale to third parties. User manual integration instructions are internal, confidential manufacturing documents. 1.
Primary Node The primary nodes make up the primary network. This node is able to receive and decode signals from the Avlite wireless remote controller, another primary node or a reserve node and act upon the signal itself. The primary node is able to pass on the received signal to other lights within range. 4.1 Node Information AvMesh® RF Communications Systems Installation & Service Manual Latest products and information available at www.avlite.
3.0 Product Design Dimensions Weight Power Requirements 28.25mm x 27.50mm x 7.50mm 4g (approx.) 3.3VDC An EMC shield is installed on the underside of the radio module.
4.0 Product Compliance Compliance statement (FCC Part 15.19) “This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.” Modification warning (FCC Part 15.