Installation Instructions

Thank you very much for purchasing SEALIGHT. This is a Rock light. With the APP that comes

with the product, users are able to get colors they want.

Restrictions and guidelines

1. Do not install the Rock light near water or in a corrosive location.

2. Do not trample or violently strike the light sets during installation.

3. Bind the LED strip securely to prevent them from being trapped in the transmission shaft or

tires.

Contents

Remote controller

Cable tie

Screw kit

Screw washer

Manual

Light sets

Parameters:

Power supply mode

Car battery

Voltage

12V-15V

Waterproof rating

IP67

Control mode

APP + remote controller

Storage

environment/operating

temperature

-40 - 85°C

Download App:

1. Download the App Hostrol smart from App store (iOS device) or Google Play (Android

device).

Tips: This App is compatible with iOS 9.0 and above, and Android 5.0 and above.

2. Turn on the Bluetooth on your device.

3. Click Add Device and follow instructions.

PAGE 1
Thank you very much for purchasing SEALIGHT. This is a Rock light. With the APP that comes with the product, users are able to get colors they want. Restrictions and guidelines 1. Do not install the Rock light near water or in a corrosive location. 2. Do not trample or violently strike the light sets during installation. 3. Bind the LED strip securely to prevent them from being trapped in the transmission shaft or tires.
PAGE 2
Steps 1. Verify the contents and accessories in the kit. 2. Connect the interfaces on the control box and light sets, and then connect them to the vehicle power supply to verify whether the light sets work and APP can be operated by the remote controller normally. 3. Disconnect the control box and the light sets, and secure the connecting box in place (with cable ties). 4. Clean the position for Rock light installation and measure the locations of holes on the light sets.
PAGE 3
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.