User's Manual

STM042 USER MANUAL

1. Plug the base charger USB cable to the computer USB port, the LED red.

2. The nano receiver plug USB port on the base.

3. Power on switch bottom of mouse, the bottom LED red.

4. Press the mouse bottom opposite code switch “Connect”, comunication with receiver is OK.

5. If mouse power is deplenished, please take the mouse into the base, keep touch the pin of the

charger base, then the mouse is begin charging .

Warring: User Don’t look the mouse bottom LED directly.

PAGE 1
STM042 USER MANUAL 1. Plug the base charger USB cable to the computer USB port, the LED red. 2. The nano receiver plug USB port on the base. 3. Power on switch bottom of mouse, the bottom LED red. 4. Press the mouse bottom opposite code switch “Connect”, comunication with receiver is OK. 5. If mouse power is deplenished, please take the mouse into the base, keep touch the pin of the charger base, then the mouse is begin charging . Warring: User Don’t look the mouse bottom LED directly.
PAGE 2
FCC Statement Changes or modifications not expressly approved by void the user's authority to operate the equipment the party responsible for compliance could This device complies with Part 15 of the FCC Rules.