Integration Manual

lviv-b2_module_family_integration_manual.docx - page 1/3

foraita, peter

LVIV-B2 Bluetooth Module Family

Integration Manual

LVIV-B2 cannot be mounted arbitrary, because of the radio communication.

If a metal enclosure is required, one of the external antenna options has to be used.

Module variants with U.FL connector for external antenna

- SE-NOBS-B2X-A3

- SE-NOBS-B2X-B3

Module Placement:

LVIV-B2 modules with U.FL connector for external antennas can be placed anywhere on

the PCB.

Suitable and certified external antennas and adapter cables are listed in the LVIV-B2

Data Sheet as well as in a separate document

“LVIVC-B2_module_family_certified_antennas.pdf”

PAGE 1
LVIV-B2 Bluetooth Module Family Integration Manual LVIV-B2 cannot be mounted arbitrary, because of the radio communication. If a metal enclosure is required, one of the external antenna options has to be used. Module variants with U.FL connector for external antenna - SE-NOBS-B2X-A3 SE-NOBS-B2X-B3 Module Placement: LVIV-B2 modules with U.FL connector for external antennas can be placed anywhere on the PCB.
PAGE 2
Module variants with internal antenna - SE-NOBS-B2i-A3 SE-NOBS-B2i-B3 Module Placement: The unit with an internal surface mounted antenna (SE-NOBS-B2i-**) cannot be mounted in a metal enclosure. No metal casing or plastics using metal flakes should be used, avoid also metallic based paint or lacquer. Keep a minimum clearance of 5 mm between the antenna and the casing. Keep minimum 10 mm free space from metal around the antenna including under and above.