REFLEXION FILTER® X A S S E M B LY + U S E
sE Electronics RF-X Assembly + Use Thank you for purchasing an sE Electronics RF-X! We hope it helps make your tracks sound great - no matter WHERE you’re recording. STEP ONE The first step is to attach the hardware to the stand, which is done by screwing the bracket onto the top of a mic stand, where the mic or shockmount normally attaches. *There’s an adapter screwed inside this connector for a European mic thread size - if you remove the adapter, the connector will fit US mic stands.
sE Electronics RF-X Assembly + Use STEP THREE Your microphone, in a shockmount or a clip, will attach to the hardware with the included standoff. You can now play with the horizontal positioning of the mic, and the height of the RFX, to get the optimum position for recording.