P6SLite PC Software Manual I, Device Add 1, Download the software and complete the installation, then run the software as shown below 2, Click on "Device mange" to add the device as shown below: 3. Click “Refresh” to search for the device, then select the device in front of the device and click “Add batch” to complete the device addition. If you use other brands of devices, you can select “Detect protocol”: ALL, the software can search out All branded equipment. 4.
. 5, Click the "Live" button to return to the preview interface: After the device is added, you can now preview the device's video normally. II, Parameter configuration of the device: 1, Clicking the right mouse button on the preview interface will bring up the drop-down menu and select “Remote Config” to enter the device configuration interface (only devices that support P6S protocol). > III, Add devices over the WAN (P2P add mode) 1, Click "Device mange" to enter the manual add device mode.
As shown in the figure above, Devices alias can customize the device name, Protocol selects ZWP2P, DID is the device's P2P DID number, you can find it on the camera's body, Device password is your device login password, the default password is empty. Then click OK to complete the addition of the remote device. 2,After the addition is successful, click “Live” to enter the live preview interface.
2),Device List: Add devices list Click the right mouse button to bring up the dialog box. Preview ALL: Preview all channel videos Close ALL: Turn off all channel videos Main Stream: All channels are displayed in the main stream mode Sub Stream: All channels are displayed in substream mode 3),PTZ control Panel: 4), Preview action label: Icon Icon is close full channels of preview. is snapshot,capture picture to local to save.
Icon is close full channels recording. Icon is close full channels audio. Icon Icon is setting multiple video on screen, can setting single, 4/9/16/25/36/64 channel video for preview is make video to full screen, press it make full screen, press ESC exit it.
8),Album Control: 1,Click the electronic “album” button to enter the electronic album interface. 2,Select the device you want to operate 3,Select local album/remote album (local album: picture or video on the computer side. Remote album: picture or video on SD card) 4,Select start time and End time 5,Select File Type:Video/Image 6,Click “Search” 7,Search out Video/image file 8,Double click to download/preview 9,Convert video files in H.265 compressed format to video files in MP4 format.
1,Click “Device manage” button to enter the electronic Device manage interface. 2,added devices List 3,Manual Add device: Devices in the LAN can be added by IP address, or remote devices can be added by P2P DID number.
1,The software will start automatically when Windows OS starts successfully.
B, Setting Image of camera video. Smart Night: Normal Mode. IR-CUT mode: auto (Passive mode), Day/Night, Auto (Active mode) IR-CUT Sensitivity: 0-50(The higher the number, the higher the sensitivity.) Image Mirror: close, Flip horizontal ,Flip Vertical, Flip Center 2, Network configuration A,TCP/IP Settings: You can choose the IP address type, manually and DHCP mode, and Modify the IP address parameters.
Choose your wireless router WIFI SSID Input KEY and Check, system will auto check the Wi-Fi details, if successful, please click the app, connect to WIFI. Setting WIFI successful, Now you can disconnect wired Ethernet cable.
Then Research your camera, at which point you search and add a camera for WIFI connections Port Configuration: C,Port Setting, HTTP/ After the signaling/data port is modified in the corresponding access software, it is necessary to manually add the modified port number, otherwise it cannot be accessed effectively (non-professionals do not recommend modifying it to avoid adding devices) D,Email Setting:Enable and configure.
E,FTP Setting: 3,Encoding settings: A,Coding parameters: Modify the format of the video screen and the appropriate parameters, has reached the optimal effect B,Audio setting: The input volume refers to the size of the camera's microphone recording. The greater the value, the louder the playback sound of the monitoring device; the output volume refers to the sound played by the camera speaker. The greater the value, the louder the camera will play.
C,Recording plan; 1. The main stream (HD) and sub-stream (clear) are optional for recording. HD recording is the highest resolution recording of the device. At this time, the SD card's recording file and the used memory capacity will become larger. Clear is the default option. 2. The recording mode will be different colors. The timing record is blue.
B,Humanoid detection: The humanoid detection function is enabled, and the alarm is triggered only when the camera detects the human form. Solved the problem of high false detection rate of motion detection. Moreover, the humanoid detection area setting supports up to 4 areas. You can set the area as you like. When someone enters the humanoid detection area, the camera starts to trigger an alarm. C,Audible alarm: When triggering motion detection or humanoid detection, the device supports alarm sound output.
5,System Setting A,Time setting: According your local time setting the camera time. B,Device information: display the device model no., network connect type, software version and IP address.
D,SD card information: display SD card memory, write status and snapshot, recording for memory size.
6,System Maintenance A.